Displays2go IPDLMCSV360 iPad bordpladeamp Instruktionsmanual

1. Introduktion

The Displays2go IPDLMCSV360 iPad Table Clamp is a versatile holder designed to securely mount various tablet devices to tabletops or countertops. This unit is compatible with iPad 1-4, iPad Air, iPad Air 2, and a range of 7-inch and 10-inch Android tablets. Its adjustable design allows for 360-degree rotation, 180-degree tilt, and 90-degree swivel, providing optimal viewing and presentation angles. The clamp mechanism can attach to surfaces up to 3.5 inches thick.

Nøglefunktioner:

• Universal compatibility with iPad 1-4, iPad Air, iPad Air 2, and various 7" and 10" Android tablets.
• Adjustable design for 360-degree rotation, 180-degree tilt, and 90-degree swivel.
• Sikker klamp mechanism for tabletops or countertops up to 3.5 inches thick.
• Designed to keep the tablet's home button exposed and accessible.
• Constructed from durable steel and aluminum components with some plastic parts.

Figur 1: Overview of the Displays2go IPDLMCSV360 iPad Table Clamp with a tablet inserted.

2. Pakkens indhold

Please verify that all components are present before proceeding with assembly.

• Justerbar tabletholder
• Articulating Arm Assembly
• Tabel Clamp Grundlag

Figure 2: The tablet clamp components, including the holder, arm, and base.

3. Opsætning og installation

3.1 Attaching the Clamp Base to a Surface

1. Identify a suitable tabletop or countertop edge. The surface thickness must not exceed 3.5 inches.
2. Placer bordet clamp base (Figure 3) onto the edge of the surface.
3. Tighten the screw mechanism on the underside of the clamp until it is firmly secured to the surface. Ensure the clamp er stabil og vakler ikke.

Figur 3: clamp base attached to a table edge.

Figur 4: Detalje af clamp screw mechanism for securing the unit.

3.2 Assembling the Arm and Holder

1. Insert the articulating arm assembly into the designated slot on the secured clamp base. Ensure it clicks or locks into place if applicable.
2. Attach the adjustable tablet holder to the end of the articulating arm. Secure any locking rings or screws to ensure a firm connection.

4. Betjeningsvejledning

4.1 Inserting a Tablet

1. Gently pull apart the spring-loaded grips of the tablet holder (Figure 5).
2. Carefully place your tablet into the holder, ensuring it is centered and securely gripped by both sides.
3. Verify that the tablet's home button remains exposed and accessible for full functionality.

Figure 5: Opening the tablet holder grips to insert a device.

4.2 Justering Viewi vinkel

The IPDLMCSV360 offers multiple adjustment points for optimal positioning:

• Rotation: The tablet holder can rotate 360 degrees, allowing for portrait or landscape orientation.
• Vip: The holder can tilt 180 degrees to adjust the vertical viewvinkel.
• Drejelig: The arm assembly allows for 90-degree swivel, enabling lateral adjustments.

Loosen any adjustment knobs or levers on the articulating arm and holder, position the tablet as desired, and then re-tighten to secure the angle.

Figure 6: Tablet holder tilted to an ergonomic viewvinkel.

Figure 7: Tablet holder swiveled for flexible positioning.

5. Vedligeholdelse

To ensure the longevity and proper function of your Displays2go iPad Table Clampfølg disse vedligeholdelsesretningslinjer:

• Rensning: Wipe the metal and plastic surfaces with a soft, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
• Inspektion: Periodically check all screws and connection points to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Opbevaring: If storing the unit for an extended period, ensure it is clean and kept in a dry environment.

6. Fejlfinding

• Issue: The clamp feels unstable on the table.

  Løsning: Sørg for bordet clamp screw is fully tightened. Verify that the tabletop thickness is within the 3.5-inch limit. Reposition the clamp if the surface edge is uneven.

• Issue: The tablet is not held securely.

  Løsning: Confirm that the tablet is properly centered within the spring-loaded grips. Ensure the tablet's dimensions are compatible with the holder (iPad 1-4, iPad Air, iPad Air 2, 7" and 10" Android tablets).
• Issue: The arm or holder does not stay in the desired position.

  Løsning: Check and tighten all adjustment knobs or locking rings on the articulating arm and tablet holder. Over time, these may loosen with frequent adjustments.

7. Specifikationer

8. Garanti og support

For warranty information or technical support regarding your Displays2go IPDLMCSV360 iPad Table Clamp, please contact Displays2go customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.

You can typically find support information on the official Displays2go webhjemmeside eller gennem den forhandler, hvor produktet blev købt.