Produkt overview
The Connects2 CTSAR003.2 is a steering wheel control interface designed for specific Alfa Romeo vehicles. This interface allows you to retain the use of your vehicle's factory steering wheel audio controls when installing an aftermarket head unit. It ensures seamless integration and continued convenience.
Dette produkt er kompatibelt med:
- Alfa Romeo 147 (2007 - 2010)
- Alfa Romeo GT (2008 - 2010)
Image 1: The Connects2 CTSAR003.2 interface module with its associated wiring harnesses and connectors. The main module is black with the "Connects2" logo, and various multi-pin connectors are visible, designed for vehicle and aftermarket head unit integration.
Opsætning og installation
Installation of the Connects2 CTSAR003.2 interface requires technical knowledge and should ideally be performed by a qualified installer. Always disconnect the vehicle's battery before beginning any electrical work.
Tjekliste før installation:
- Ensure the vehicle is compatible with the CTSAR003.2 model.
- Verify all components are present: interface module, vehicle-specific harness, and head unit patch lead (sold separately or included with head unit).
- Have necessary tools: trim removal tools, screwdrivers, wire strippers/crimpers (if required for patch lead connection).
Installationstrin:
- Afbryd batteriet: Frakobl den negative pol på køretøjets batteri for at forhindre kortslutninger.
- Fjern fabrikshovedenhed: Carefully remove the existing factory head unit from the dashboard. Refer to your vehicle's service manual for specific instructions on trim and head unit removal.
- Tilslut køretøjets ledningsnet: Connect the vehicle-specific harness from the CTSAR003.2 kit to the factory wiring harness in the vehicle's dashboard.
- Connect Patch Lead: Connect the appropriate head unit patch lead (not included with the interface, typically supplied with the aftermarket head unit or purchased separately) to the Connects2 interface module. This lead connects the interface to your aftermarket stereo.
- Connect Interface to Head Unit: Connect the other end of the patch lead to the steering wheel control input on your aftermarket head unit.
- Connect Power/Ground: Ensure all power, ground, and speaker connections for the aftermarket head unit are correctly made.
- Test funktionalitet: Before fully reassembling the dashboard, reconnect the vehicle battery and test the steering wheel controls with the new head unit. Ensure all buttons function as expected (volume up/down, track skip, mode, etc.).
- Fastgør og saml igen: Once confirmed working, secure the interface module and wiring, then carefully reassemble the dashboard and reinstall the aftermarket head unit.
Betjeningsvejledning
Once installed, the Connects2 CTSAR003.2 interface operates automatically, translating the signals from your vehicle's steering wheel controls into commands understood by your aftermarket head unit.
Grundlæggende betjening:
- Lydstyrkekontrol: Use the volume up/down buttons on your steering wheel to adjust the audio level of your aftermarket head unit.
- Track/Station Change: Use the track forward/backward or station seek buttons to change tracks (CD/USB/Bluetooth) or radio stations (FM/AM).
- Tilstand/kilde: The mode or source button typically cycles through the available audio sources on your head unit (e.g., Radio, CD, USB, Bluetooth, AUX).
- Stum: If your steering wheel has a mute button, it will mute/unmute the audio output.
Note: The exact functionality of each button may vary slightly depending on your specific vehicle model and the aftermarket head unit installed. Some advanced functions or phone controls may require specific head unit compatibility or additional modules.
Opretholdelse
The Connects2 CTSAR003.2 interface is a sealed electronic component and requires minimal maintenance. Once installed correctly, it is designed for long-term, reliable operation.
- Hold tør: Ensure the module and its connections remain dry and free from moisture.
- Sikre forbindelser: During installation, ensure all connections are secure to prevent intermittent operation. Avoid excessive pulling or bending of wires.
- Undgå fysisk skade: Protect the module from physical impact or crushing.
No user-serviceable parts are inside the module. Do not attempt to open or repair the unit, as this will void the warranty.
Fejlfinding
If you experience issues with your steering wheel controls after installing the Connects2 CTSAR003.2 interface, consider the following troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Steering wheel controls do not work at all. |
|
|
| Some buttons work, others do not. |
|
|
| Controls are intermittent or erratic. |
|
|
If these steps do not resolve the issue, it is recommended to consult a professional car audio installer or contact Connects2 technical support.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | CTSAR003.2 |
| Mærke | Tilslutter 2 |
| Fabrikant | Tilslutter 2 |
| Kompatibilitet | Alfa Romeo 147 (2007-2010), Alfa Romeo GT (2008-2010) |
| Varens vægt | 120 g |
| Produktmål (L x B x H) | 30 x 25 x 5 cm |
| ASIN | B013PD3DO8 |
| Første ledige dato | 27. februar 2016 |
Garanti og support
Connects2 provides a warranty for this product to ensure customer satisfaction and product reliability.
Garantioplysninger:
This Connects2 product comes with a 2 års garanti on any new component. This warranty covers defects in materials and workmanship under normal use.
Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accident, or unauthorized modifications.
Teknisk support:
For technical assistance, installation queries, or warranty claims, please contact Connects2 directly or your authorized dealer. Refer to the official Connects2 webwebsted for de mest opdaterede kontaktoplysninger og supportressourcer.
Ansvarsfraskrivelse: Connects2 designs and develops interface solutions for leading vehicle manufacturers and vehicle audio manufacturers. Always ensure compatibility before purchase and installation.
