Indledning
Welcome to the user manual for the Rigol DS1054Z Digital Oscilloscope. This document provides essential information for the safe and effective use of your new instrument. The DS1054Z is a versatile 4-channel, 50 MHz digital oscilloscope designed for precise waveform analysis and measurement in various electronic applications.
Sikkerhedsoplysninger
Please read all safety instructions carefully before operating the device to prevent injury or damage to the instrument.
- Strømkilde: Sørg for, at oscilloskopet er tilsluttet en strømkilde med den korrekte lydstyrke.tage and frequency as specified on the device.
- Jording: Always use a properly grounded power cord to prevent electric shock.
- Ventilation: Bloker ikke ventilationsåbningerne. Sørg for tilstrækkelig luftgennemstrømning omkring instrumentet for at forhindre overophedning.
- Miljø: Operate the oscilloscope in a dry, clean environment, away from direct sunlight, high temperatures, humidity, and strong electromagnetic fields.
- Væskeeksponering: Avoid exposing the instrument to liquids. If liquid enters the device, disconnect power immediately and have it inspected by qualified service personnel.
- Service: Overlad al service til kvalificeret servicepersonale. Forsøg ikke selv at åbne eller reparere instrumentet.
Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- Rigol DS1054Z Digital Oscilloscope
- 4 x Passive Probes (RP2200)
- Strømledning
- USB kabel
- Kalibreringscertifikat
- Quick Guide (Printed)
Image: Rigol DS1054Z Oscilloscope with its standard accessories, including four probes, power cord, and documentation.
Produkt overview
Frontpanel
Billede: Forside view of the Rigol DS1054Z, showing the large display, channel inputs, and control buttons.
The front panel features a large 7-inch WVGA (800x480) TFT display for clear waveform visualization. Key controls include:
- Channel Inputs (CH1-CH4): BNC connectors for connecting probes.
- Vertikale kontroller: Knobs and buttons for adjusting vertical scale (Volts/Div) and position for each channel.
- Horisontale kontroller: Knobs for adjusting horizontal scale (Sec/Div) and position.
- Trigger Controls: Buttons and knobs for setting trigger level, mode, and source.
- Funktionsknapper: Dedicated buttons for Measure, Acquire, Storage, Cursor, Display, Utility, Help, and Menu navigation.
- USB-værtsport: Located on the front for connecting USB storage devices.
Bagpanel
Billede: Bagside view of the Rigol DS1054Z, showing power input, LAN, USB, and auxiliary ports. The serial number DS1ZA233608157 is visible.
The rear panel provides essential connectivity options:
- Strømindgang: Til tilslutning af netledningen.
- LAN-port: Til netværksforbindelse og fjernbetjening.
- USB-enhedsport: Til tilslutning til en computer.
- Aux (TrigOut / PassFail) Port: An auxiliary output for trigger signals or Pass/Fail testing.
Opsætning
Strømtilslutning
- Ensure the oscilloscope is turned off.
- Connect the provided power cord to the power input on the rear panel of the oscilloscope.
- Sæt den anden ende af netledningen i en jordet stikkontakt.
Probe Connection and Compensation
- Connect the probe to one of the BNC input channels (CH1-CH4) on the front panel.
- Attach the probe clip to the probe compensation test point (usually a square wave output) on the front panel.
- Turn on the oscilloscope.
- Adjust the probe compensation using a small screwdriver on the probe body until a flat-top square wave is displayed on the screen. This ensures accurate measurements.
Image: The Rigol DS1054Z in an operational setup, demonstrating probe connection and signal acquisition.
Betjeningsvejledning
Grundlæggende mål
The DS1054Z offers a wide range of measurement capabilities:
- Kanalvalg: Use the CH1-CH4 buttons to enable or disable channels.
- Vertical Scale: Adjust the Volts/Div knob to change the vertical sensitivity.
- Horisontal skala: Adjust the Sec/Div knob to change the time base.
- Automatisk opsætning: Tryk på AUTO button for automatic setup of vertical, horizontal, and trigger systems.
- Measure Function: Tryk på Måle button to display automatic measurements such as frequency, period, peak-to-peak voltage, og mere.
- Matematiske funktioner: Brug den MATH button for waveform operations like addition, subtraction, multiplication, division, FFT, and integration.
Multiple waveform display.
Single pulse waveform analysis.
Rising and falling edge signals.
Decoded serial data display.
Amplitude modulated waveform.
Complex multi-channel signal.
Lissajous figures for phase analysis.
Udløser
Triggering is crucial for stable waveform display. Use the trigger controls to set the trigger type (Edge, Pulse, Slope, Video, etc.), source (CH1-CH4, AC Line, External), and level. The DS1054Z supports advanced triggering options to capture specific events.
Waveform Display and Analysis
The UltraVision technology provides a deeper memory (12 Mpts, upgradable to 24 Mpts) and a high waveform capture rate (up to 30,000 wfms/s), allowing for the capture of transient events and detailed signal analysis. The multi-level intensity grading display helps visualize signal variations over time.
Opretholdelse
- Rensning: Brug en blød, tør klud til at rengøre oscilloskopets yderside. Ved genstridigt snavs kan du bruge en let tør klud.amp cloth with mild detergent can be used. Do not use abrasive cleaners or solvents.
- Opbevaring: Store the oscilloscope in a cool, dry place, away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power cord.
- Kalibrering: For optimal performance, periodic calibration by qualified service personnel is recommended.
Fejlfinding
If you encounter issues with your Rigol DS1054Z, refer to the table below for common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet display efter tænding | Power cord not connected; Power switch off; Fuse blown. | Check power cord connection; Ensure power switch is on; Contact service for fuse replacement. |
| Ingen bølgeform vist | Probe not connected; Channel disabled; Vertical scale too high/low; Trigger not set correctly. | Connect probe; Enable channel; Adjust Volts/Div; Adjust trigger level/mode. |
| Ustabil bølgeform | Incorrect trigger settings; Probe compensation incorrect. | Adjust trigger level/mode/source; Perform probe compensation. |
| For meget støj fra ventilatoren | Normal operation; Dust accumulation. | Ensure proper ventilation; Clean dust from vents (if accessible and safe). If persistent or unusual, contact support. |
Specifikationer
Key technical specifications for the Rigol DS1054Z Digital Oscilloscope:
| Feature | Specifikation |
|---|---|
| Båndbredde | 50 MHz |
| Kanaler | 4 |
| Realtids Sample Sats | 1 GSa/s (single channel) |
| Hukommelsesdybde | 12 Mpts (upgradable to 24 Mpts) |
| Bølgeformoptagelseshastighed | Up to 30,000 wfms/s |
| Vise | 7-inch WVGA (800x480) TFT |
| Forbindelse | USB Host, USB Device, LAN, Aux (TrigOut / PassFail) |
| Dimensioner (L x B x H) | 13 x 7 x 5 tommer |
| Vægt | 6.6 pund |
| Modelnummer | DS1054Z |
Garantioplysninger
The Rigol DS1054Z Digital Oscilloscope comes with a 3-ÅR warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation provided with your product or visit the official Rigol webwebsted.
Støtte
For technical support, product inquiries, or service requests, please contact Rigol customer support through their official channels. You can find more information and resources on the Rigol Official Store on Amazon eller deres virksomhed webwebsted.
