1. Introduktion
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Alpina A305 Chainsaw. Please read this manual thoroughly before operating the chainsaw to ensure your safety and to achieve optimal performance from the tool. Keep this manual in a safe place for future reference.
2. Sikkerhedsoplysninger
Det kan være farligt at betjene en motorsav, hvis de korrekte sikkerhedsforanstaltninger ikke følges. Prioritér altid sikkerhed for at forhindre alvorlig personskade eller død.
- Læs manualen: Forstå alle instruktioner og advarsler før brug.
- Personligt beskyttelsesudstyr (PPE): Always wear appropriate PPE, including a safety helmet, eye protection, hearing protection, heavy-duty gloves, safety trousers (cut-resistant), and safety boots.
- Arbejdsområde: Sørg for, at arbejdsområdet er frit for tilskuere, børn og kæledyr. Hold en sikker afstand til andre personer og genstande.
- Fast greb: Hold altid motorsaven fast med begge hænder, med tommelfingre og fingre omgivet af håndtagene.
- Spark tilbage: Be aware of kickback, which can occur when the moving chain at the tip of the guide bar contacts an object, or when the wood closes in and pinches the saw chain in the cut. Avoid cutting with the tip of the guide bar.
- Brændstofhåndtering: Handle fuel with extreme care. It is highly flammable. Mix and refuel outdoors, away from ignition sources.
- Opretholdelse: Regularly inspect and maintain the chainsaw as described in this manual. A dull or improperly tensioned chain can increase the risk of kickback and injury.
- Vejrforhold: Brug ikke motorsaven i ugunstige vejrforhold såsom kraftig regn, stærk vind eller isglatte forhold.
3. Produktet er slutview
The Alpina A305 is a compact and lightweight chainsaw designed for hobby work and light tree maintenance. It features a 25 ccm engine and a 25 cm (10-inch) guide bar.
Figur 1: Forsiden view of the Alpina A305 Chainsaw, highlighting its compact design and yellow casing. The chain and guide bar are visible, along with the front handle and chain brake.
Figur 2: Side view of the Alpina A305 Chainsaw, showing the full length of the Oregon Double Guard 91 guide bar and chain. The rear handle and engine housing are also visible.
Figur 3: Top-down view of the Alpina A305 Chainsaw, illustrating the top handle, starter cord area, and fuel/oil caps. The chain brake lever is also prominent.
4. Opsætning
4.1 Udpakning og inspektion
Carefully remove the chainsaw and all accessories from the packaging. Inspect for any damage that may have occurred during shipping. If any damage is found, do not operate the chainsaw and contact your dealer.
4.2 Montering af sværd og kæde
Refer to the detailed diagrams in your printed manual for specific steps. Generally, this involves:
- Remove the chain brake cover.
- Placer sværdet på tappene.
- Monter forsigtigt savkæden omkring tandhjulet og ind i sværdsporet. Sørg for, at kædens skær vender i den rigtige retning.
- Replace the chain brake cover and hand-tighten the nuts.
- Juster kædespændingen (se afsnit 6.1).
4.3 Brændstof og kædeolie
This chainsaw uses a two-stroke engine that requires a mixture of unleaded gasoline and two-stroke engine oil. Always use a high-quality two-stroke oil specifically designed for air-cooled engines. The recommended mixing ratio is typically 50:1 (2% oil), but always refer to the specific instructions on your two-stroke oil container.
- Brændstoftank: Fill with the correct fuel mixture.
- Kædeolietank: Fill with high-quality chain lubricant oil. Never use waste oil or motor oil.
Advarsel: Always mix fuel in a well-ventilated area, away from sparks or open flames. Do not smoke while handling fuel.
5. Betjeningsvejledning
5.1 Kontroller før drift
- Kontroller brændstof- og kædeolieniveauer.
- Verify chain tension and sharpness.
- Sørg for, at alle møtrikker og bolte er stramme.
- Test the chain brake for proper function.
- Undersøg luftfilteret for renlighed.
5.2 Start af motoren (koldstart)
- Placer motorsaven på en fast, flad overflade.
- Aktiver kædebremsen.
- Set the choke lever to the 'FULL CHOKE' position.
- Tryk flere gange på primerpumpen, indtil brændstoffet er synligt.
- Træk fast og støt i startsnoren, indtil motoren starter (normalt et par træk).
- Once the engine fires, move the choke lever to the 'HALF CHOKE' or 'RUN' position (depending on model).
- Træk i startsnoren igen, indtil motoren starter og kører.
- Allow the engine to warm up for a few moments, then disengage the chain brake.
5.3 Operating the Chainsaw
- Maintain a balanced stance with feet apart.
- Hold altid motorsaven med begge hænder.
- Plan your cut before starting.
- Ræk ikke for langt eller klip over skulderhøjde.
- Be aware of falling branches and rolling logs.
5.4 Standsning af motoren
Release the throttle trigger and allow the engine to idle. Move the ignition switch to the 'STOP' position.
6. Vedligeholdelse
Regular maintenance is crucial for the safe and efficient operation and longevity of your chainsaw.
6.1 Daglige kontroller
- Kædespænding: Check chain tension before each use. The chain should be snug against the guide bar but still able to be pulled around by hand.
- Kædeskarphed: A sharp chain cuts efficiently and reduces the risk of kickback. Sharpen or replace dull chains.
- Kædesmøring: Ensure the chain oiler is functioning correctly and lubricating the chain.
6.2 Regelmæssig vedligeholdelse
- Luftfilter: Clean the air filter regularly, especially in dusty conditions. A clogged filter reduces engine performance.
- Tændrør: Inspect the spark plug for wear and proper gap. Replace if necessary.
- Guide Bar: Rengør sværdsporet og oliehullerne. Vend sværdet med jævne mellemrum for at sikre jævn slitage.
- Køleribber: Hold motorens køleribber rene for at forhindre overophedning.
7. Fejlfinding
This section addresses common issues you might encounter with your Alpina A305 Chainsaw.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motoren vil ikke starte | Intet brændstof, forkert chokerindstilling, snavset tændrør, tilstoppet brændstoffilter | Check fuel level, adjust choke, clean/replace spark plug, clean/replace fuel filter |
| Chainsaw loses power | Clogged air filter, dull chain, incorrect fuel mixture | Clean air filter, sharpen chain, ensure correct fuel mix |
| Kæden bevæger sig ikke | Chain brake engaged, incorrect chain tension, damaged clutch | Disengage chain brake, adjust chain tension, consult service center for clutch issues |
| Overdreven vibration | Loose components, damaged chain/bar, engine imbalance | Check all fasteners, inspect chain/bar for damage, consult service center for engine issues |
If you are unable to resolve an issue using this guide, please contact a qualified service technician.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Model | A305 |
| Fabrikant | Alpina |
| Magt | 0.9 kW |
| Motorens slagvolumen | 25 ccm |
| Sværd længde | 25 cm (10 tommer) |
| Vægt | 3.1 kg |
| Varemodelnummer | 202510020/ALP |
| Strømkildetype | Blandning (Fuel Mixture) |
9. Garanti og support
9.1 Garantioplysninger
The Alpina A305 Chainsaw comes with a warranty period of 2 years for private use og 1 year for professional useDenne garanti dækker fabrikationsfejl under normale brugsforhold. Gem venligst din købsbevis til garantikrav.
9.2 Kundesupport
For technical assistance, spare parts, or warranty service, please contact your authorized Alpina dealer or visit the official Alpina webwebsted for supportkontaktoplysninger.
