Clearaudio Concept MM Pladespiller Brugermanual

1. Introduktion

The Clearaudio Concept MM Turntable is an exceptional audio component designed to deliver high-fidelity sound reproduction from your vinyl records. Featuring an exclusive magnetic bearing system and a pre-mounted Classic MM cartridge, this turntable offers a refined and dynamic listening experience. Its robust construction, utilizing high-quality alloy and engineered wood, ensures stable and precise playback.

Nøglefunktioner omfatter:

• Pre-mounted Classic MM (Moving Magnet) cartridge for immediate use.
• Exclusive magnetic bearing for ultra-low friction and smooth platter rotation.
• Belt-drive motor for stable speed and reduced vibrations.
• Integrated tonearm (CF tonearm) designed for optimal tracking.

2. Hvad er der i æsken

Sørg for, at alle komponenter er til stede og i god stand ved udpakning:

• Clearaudio Concept MM Turntable unit
• Pre-mounted Classic MM cartridge/stylus
• Støvdæksel
• Power supply unit (with cable)
• Drivrem
• Platter

Hvis nogen dele mangler eller er beskadiget, bedes du straks kontakte din forhandler.

3. Opsætningsvejledning

Careful setup is crucial for optimal performance of your Clearaudio Concept MM Turntable.

3.1 Placering

Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

3.2 Udpakning og montering

1. Gently remove the turntable from its packaging.
2. Place the main plinth on your chosen surface.
3. Carefully place the platter onto the spindle. The magnetic bearing system will guide it into place.
4. Install the drive belt around the motor pulley and the inner rim of the platter.
5. Placer støvdækslet over drejeskiven.

3.3 Tonearm and Cartridge Adjustment

Your Clearaudio Concept MM Turntable comes with a pre-mounted Classic MM cartridge. While factory-set, fine-tuning may be required for optimal sound and stylus longevity.

• Sporingskraft: The recommended tracking force for the Classic MM cartridge is typically around 2.0 grams. Due to the magnetic suspension, it is recommended to set the tracking force at the height of the platter for accurate readings. Use a digital stylus force gauge for precision.
• Anti-skøjteløb: The anti-skating adjustment is located underneath the base of the platter. This adjustment counteracts the inward force on the tonearm, ensuring even wear on the stylus and proper channel balance. Adjust it carefully while playing a record or using a test record.
• VTA (Vertical Tracking Angle) / Azimuth: These are typically factory-set for the pre-mounted cartridge. Refer to advanced setup guides if further adjustment is desired.

Figur 3.1: Overview of the Clearaudio Concept MM Turntable, showing the platter, tonearm, and speed selection knob.

3.4 Forbindelse

Connect the turntable to your audio system:

1. Connect the RCA audio cables from the turntable's output to the "Phono MM" input on your amplifier or AV receiver. If your amplifier does not have a dedicated "Phono MM" input, you will need an external phono preamplivligere.
2. Connect the ground wire from the turntable to the ground terminal on your amplifier eller phono preamplifier to minimize hum.

3.5 Strømtilslutning

Connect the power supply unit to the turntable's power input, then plug it into a suitable wall outlet. Ensure the power switch is in the OFF position before connecting.

4. Betjeningsvejledning

4.1 Tænd/sluk

Locate the power switch, typically integrated with the speed selection knob. Turn the knob to the desired speed (33, 45, or 78 RPM) to power on the turntable. Turn it to the 'Off' position to power off.

4.2 hastighedsvalg

The Clearaudio Concept MM Turntable supports multiple playback speeds:

• 33 ⅕ RPM: For standard LPs (Long Play records).
• 45 RPM: For singles and some audiophile pressings.
• 78 RPM: For shellac records (requires a dedicated 78 RPM stylus, not included).

Select the appropriate speed using the control knob on the plinth.

4.3 Afspilning af en plade

1. Læg en plade på fadet.
2. Select the correct playback speed.
3. Løft tonearmen ved hjælp af cue-håndtaget.
4. Placer forsigtigt tonearmen over den ønskede startrille på pladen.
5. Gently lower the cueing lever to allow the stylus to descend onto the record.
6. Juster lydstyrken på din amplivligere.

4.4 Stopping Playback

1. Løft tonearmen ved hjælp af cue-håndtaget.
2. Return the tonearm to its rest.
3. Lower the cueing lever.
4. Turn the speed selection knob to the 'Off' position to power down the turntable.
5. Replace the dust cover to protect the turntable from dust.

5. Vedligeholdelse

Regular maintenance will ensure the longevity and optimal performance of your turntable.

• Støvdæksel: Always use the dust cover when the turntable is not in use to prevent dust accumulation on the platter, tonearm, and stylus.
• Cleaning the Plinth and Platter: Use a soft, dry, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
• Rengøring af pennen: Gently clean the stylus regularly using a dedicated stylus brush or cleaning fluid. Always brush from back to front.
• Drivrem: Periodically inspect the drive belt for wear or stretching. Replace it if it appears loose or cracked, as this can affect speed stability.
• Udskiftning af patron: The stylus (needle) of your cartridge will wear over time. Consult a professional or refer to the cartridge manufacturer's guidelines for replacement intervals.

6. Fejlfinding

Her er nogle almindelige problemer og deres potentielle løsninger:

If the problem persists, please contact your authorized Clearaudio dealer or support.

7. Specifikationer

8. Garanti og support

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Clearaudio dealer. Clearaudio products are known for their quality and durability, and support is available through their official channels.

For technical assistance or service inquiries, please contact your local Clearaudio distributor or visit the official Clearaudio webwebsted for kontaktoplysninger.