HornBlasters EH-OOGAH

HornBlasters Black Oogah Horn EH-OOGAH brugsanvisning

Model: EH-OOGAH

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your HornBlasters Black Oogah Horn, model EH-OOGAH. Please read these instructions carefully before installation and use to ensure safe and proper functionality. This horn is designed to produce the classic "Oogah" sound, adding a distinctive touch to your vehicle.

Sikkerhedsoplysninger

  • Frakobl altid køretøjets batteri, før du udfører elektrisk arbejde.
  • Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.
  • Mount the horn in a location where it is protected from direct water spray and excessive heat.
  • Do not operate the horn for extended periods to prevent overheating.
  • Brug passende personlige værnemidler, såsom sikkerhedsbriller, under installationen.

Pakkens indhold

  • 1 x HornBlasters Black Oogah Horn (Model EH-OOGAH)
  • Mounting hardware (bolt, nut)
  • Wiring components (relay, wires, connectors)
HornBlasters Black Oogah Horn with included components
Figure 1: HornBlasters Black Oogah Horn with included relay, wires, and mounting bolt.

Opsætning og installation

The HornBlasters Black Oogah Horn is designed for easy installation with a 12V power source. Follow these steps for proper setup:

  1. Vælg et monteringssted: Select a secure, flat surface on your vehicle that is free from obstructions and away from excessive heat or direct water exposure. Ensure the horn's opening is not blocked.
  2. Mount the Horn: Use the provided bolt and nut to securely fasten the horn to the chosen location.
  3. Ledningsforbindelser:
    • Connect the positive terminal of the horn to the positive wire from the included relay.
    • Connect the negative terminal of the horn to a suitable ground point on the vehicle chassis.
    • Connect the relay to your vehicle's 12V power supply (e.g., battery positive terminal) and the horn activation switch (not included). Refer to the relay's specific wiring diagram for detailed connections.
  4. Test funktionalitet: Once all connections are secure, reconnect the vehicle's battery and test the horn.
Video 1: An unboxing and basic wiring demonstration of a motor-driven Oogah/Klaxon horn, showing the connection of positive and negative terminals and a test of the sound.

Betjeningsvejledning

The HornBlasters Black Oogah Horn produces a distinct, vintage "Oogah" sound. To operate the horn, activate the connected horn switch in your vehicle. The horn will emit its characteristic sound at approximately 115 decibels, ensuring attention-grabbing notification.

Opretholdelse

To ensure the longevity and optimal performance of your HornBlasters Oogah Horn, follow these simple maintenance guidelines:

  • Regelmæssig rengøring: Periodically wipe down the exterior of the horn with a soft, damp klud til at fjerne snavs og snavs. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
  • Undersøg forbindelser: Annually check all electrical connections for tightness and corrosion. Secure any loose connections and clean any signs of corrosion.
  • Tjek montering: Ensure the horn remains securely mounted to its location. Tighten any loose mounting hardware as needed.
  • Undgå forhindringer: Keep the horn's opening clear of any obstructions (e.g., mud, ice, debris) that could impede sound production.

Fejlfinding

If you encounter issues with your HornBlasters Oogah Horn, refer to the following troubleshooting tips:

ProblemMulig årsagLøsning
Hornet lyder ikkeNo power, loose wiring, faulty relay, faulty horn switch.Check battery connections, ensure all wires are securely connected, test the relay and horn switch for functionality.
Svag eller forvrænget lydLav voltage, poor ground connection, internal horn issue, obstruction in horn.Verify 12V power supply, ensure a clean and solid ground connection, check for obstructions, or contact support if the issue persists.
Hornet lyder kontinuerligtStuck horn switch, faulty relay.Inspect and replace the horn switch if necessary, test or replace the relay.

Specifikationer

FeatureDetalje
MærkeHornBlasters
ModelnummerEH-OOGAH
Produktmål (L x B x H)10 x 5 x 4 tommer
Varens vægt1.55 pund
Voltage12 volt
Støjniveau115 decibel
MaterialePlast
TilpasningstypeUniversal Fit
UPC854916005136
Diagram showing the dimensions of the HornBlasters Oogah Horn
Figure 2: Product dimensions of the HornBlasters Oogah Horn.

Garanti og support

For warranty information, technical support, or any questions regarding your HornBlasters Black Oogah Horn, please contact HornBlasters directly through their official webwebstedet eller kundeservicekanaler. Gem din købskvittering til garantikrav.

Relaterede dokumenter - EH-OOGAH

Preview Installationsvejledning til HornBlasters Compact elektriske og snigskyttelufthorn
Trin-for-trin installationsvejledning til HornBlasters Compact Electric og Sniper Air Horns, der tilbyder to forskellige ledningsføringsmetoder til integration med køretøjets rat eller ekstra trykknapper.
Preview HornBlasters Mini Outlaw & Flatlaw 127H Toghornsæt Installationsvejledning
Omfattende installationsmanual til HornBlasters Mini Outlaw og Flatlaw 127H toghornsæt. Indeholder sætindhold, sikkerhedsinstruktioner, anbefalede værktøjer, installationstrin, ledningsdiagrammer, vedligeholdelsesplaner og fejlfindingsvejledninger.
Preview HornBlasters Shocker XL toghorn installationsmanual
Omfattende installationsvejledning til HornBlasters Shocker XL-toghornsættet, der dækker planlægning, komponentinstallation, ledningsføring, vedligeholdelse og fejlfinding. Indeholder sikkerhedsinstruktioner og sætindhold.
Preview HornBlasters WRANGO JLU Installation Manual for 2018-2020 Jeep Wrangler JLU
Comprehensive installation manual for the HornBlasters WRANGO JLU train horn kit, designed for 2018-2020 Jeep Wrangler JLU models with a 3.6L V6 engine. Includes kit contents, safety instructions, step-by-step installation guides, maintenance tips, and troubleshooting.
Preview HornBlasters trådløse aktiveringsfjernbetjeningsinstruktioner og ledningsføringsvejledning
Detaljerede instruktioner og ledningsdiagrammer til HornBlasters HB-RC trådløs fjernbetjening til lufthorn. Lær, hvordan du tilslutter styreenheden, installerer batteriet og betjener fjernbetjeningen.
Preview HornBlasters musikhorn installationsvejledning
Omfattende installationsvejledning til HornBlasters musikalske hornsystem. Lær, hvordan du monterer horn og kompressor, trækker luftledninger og tilslutter systemet ved hjælp af rat eller trykknapper. Indeholder komponentliste og supportkontakt.