Amazon Basics 8-Sheet Cross-Cut Paper and Credit Card Shredder

Indledning

Tak for købetasing the Amazon Basics 8-Sheet Cross-Cut Paper and Credit Card Shredder. This device is designed to securely dispose of sensitive documents and credit cards, turning them into small, unreadable pieces. For optimal performance and safety, please read this manual thoroughly before operation and retain it for future reference.

Front view of the Amazon Basics 8-Sheet Cross-Cut Shredder, showcasing its compact design and clear viewvindue.

Sikkerhedsoplysninger

ADVARSEL: RISIKO FOR BRAND

• Spray eller opbevar ikke aerosolprodukter i eller omkring makuleringsmaskinen.
• Do not shred items like metallic credit cards, as this can damage the shredder and pose a fire risk.
• Hold løstsiddende tøj, smykker, hår og hænder væk fra papirindføringsåbningen.
• Hold børn og kæledyr væk fra makuleringsmaskinen.
• Always unplug the shredder when not in use or before cleaning.

Opsætning

1. Unpack the shredder and ensure all components are present: shredder head and waste bin.
2. Place the waste bin on a flat, stable surface.
3. Carefully place the shredder head onto the waste bin, ensuring it is properly aligned and securely seated. The misaligned indicator light will turn off when correctly positioned.
4. Sæt netledningen i en almindelig stikkontakt.

The shredder is designed to fit conveniently in a home or office environment.

Betjeningsvejledning

The shredder features a 4-mode control switch and LED status indicators for ease of use.

Close-up of the shredder's control panel, showing the mode switch and indicator lights.

Control Switch Modes:

• OFF (O): Turns the shredder off.
• REVERSE (<<): Vender makuleringsmekanismen om for at udbedre papirstop.
• AUTO/ON (I): The shredder automatically starts when paper is inserted and stops when shredding is complete. This is the recommended mode for normal operation.
• FORWARD (>>): Manually engages the shredding mechanism to push paper through.

Shredding Documents:

1. Set the control switch to AUTO/ON (I). The 'Power On' indicator light will illuminate.
2. Insert up to 8 sheets of 20-pound bond paper into the 8.7-inch-wide paper entry slot. The shredder can also handle staples and small paper clips.
3. For credit cards, insert one card at a time into the dedicated slot.
4. The shredder will automatically begin shredding. Once complete, it will stop.

A user demonstrating the insertion of paper into the shredder's entry slot.

Køretid:

The shredder has a maximum run time of 3 minutes on, followed by a 30-minute cool-down period. Thermal protection and auto shut-off features are included to prevent overheating. If the 'Overheat' indicator light illuminates, allow the shredder to cool down for 30 minutes before resuming operation.

Opretholdelse

Tømning af affaldsbeholderen:

The shredder features a clear window on the front of the bin, allowing you to monitor the shredded paper level. When the bin appears full:

1. Set the control switch to FRA (O) and unplug the shredder from the power outlet.
2. Lift the shredder head off the waste bin using the integrated handle.
3. Empty the shredded contents from the 4.1-gallon bin into a trash receptacle.
4. Replace the shredder head securely onto the waste bin.
5. Plug the shredder back into the power outlet.

The shredder's viewing window allows for easy monitoring of the waste bin's fill level.

Fejlfinding

Refer to the indicator lights on the control panel for common issues:

• Misaligned Light: Indicates the shredder head is not properly seated on the waste bin. Lift and re-seat the shredder head until the light turns off.
• Overbelastningslys: Indicates too many sheets of paper were inserted. Use the REVERSE (<<) mode to clear the jam, remove some sheets, and re-insert a smaller quantity.
• Overheat Light: Indicates the shredder has exceeded its maximum run time or is too hot. Unplug the shredder and allow it to cool down for 30 minutes.
• Tændt lys: Angiver, at makulatoren er tændt og klar til brug.

For mere detaljeret fejlfinding henvises til den officielle Fejlfindingsvejledning (PDF).

Specifikationer

Garanti og support

For warranty information, please refer to the official Garanti (PDF) dokument.

For kundeservice og support, kontakt venligst: 1-844-303-4344.