Indledning
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ideal Standard Conca T637801 Duroplast Toilet Seat. Designed for durability and functionality, this toilet seat features a modern aesthetic with clean lines. Please read these instructions carefully before installation and retain them for future reference.
Sikkerhedsoplysninger
- Always ensure the toilet bowl is clean and dry before installation.
- Do not use abrasive cleaners or harsh chemicals on the toilet seat, as this may damage the Duroplast material.
- Avoid excessive force when closing the seat or lid to prevent damage to hinges.
- Hold små dele utilgængeligt for børn under installationen.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- 1 x Ideal Standard Conca T637801 Duroplast Toilet Seat
- 1 x Brugsanvisning (dette dokument)
- Mounting hardware (bolts, washers, nuts)
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Ideel standard |
| Modelnummer | T637801 |
| Materiale | Duroplast |
| Farve | Hvid |
| Stil | Conca |
| Form | Rectangular with rounded corners (Conca style) |
| Produktmål (L x B x H) | 42.8 x 34.5 x 6 cm |
| Varens vægt | 2.6 kilo |
| Oprindelsesland | Italien |
| Inkluderede komponenter | 1 x Toilet seat, 1 Manual |
Opsætning og installation
Nødvendige værktøjer (ikke inkluderet):
- Justerbar skruenøgle eller tang
- Skruetrækker (hvis relevant til justering af hængsel)
- Målebånd
Kontrol før installation:
Before installing, ensure your toilet bowl dimensions are compatible with the Conca T637801 seat. Refer to the diagram below for key measurements.
Billedbeskrivelse: This diagram provides critical measurements for installation, including a bolt spacing of 156mm, a total length of 435mm, and a width of 347mm, ensuring compatibility with your toilet.
Installationstrin:
- Fjern gammelt sæde: If replacing an existing toilet seat, loosen and remove the nuts from the underside of the toilet bowl that secure the old seat. Lift off the old seat and clean the area thoroughly.
- Position New Hinges: Place the new toilet seat hinges into the mounting holes on the toilet bowl. Ensure the hinges are aligned correctly.
- Sikre hængsler: From the underside of the toilet bowl, attach the washers and nuts to the bolts extending from the hinges. Hand-tighten first to allow for minor adjustments.
- Juster justering: Close the toilet seat and lid to check for proper alignment with the toilet bowl. Adjust the hinges as needed to ensure the seat is centered and sits flush.
- Endelig stramning: Once aligned, fully tighten the nuts using an adjustable wrench or pliers. Be careful not to overtighten, which could damage the porcelain.
- Test stabilitet: Gently press down on the seat to ensure it is stable and does not wobble.
Billedbeskrivelse: This image displays the Ideal Standard Conca T637801 toilet seat in its open position, highlighting the white Duroplast material and the overall design.
Billedbeskrivelse: En top-down view of the toilet seat correctly installed on a toilet, demonstrating its fit and appearance in a bathroom setting.
Billedbeskrivelse: En side view of the toilet seat installed, showing its profile and how it integrates with the toilet bowl.
Operation
The Ideal Standard Conca T637801 toilet seat operates as a standard toilet seat. Lift the lid and seat manually for use. Close the lid and seat gently after use. The Duroplast material provides a durable and comfortable surface.
Vedligeholdelse og pleje
Proper care will ensure the longevity and appearance of your toilet seat.
- Rensning: Clean the toilet seat regularly with a soft cloth, warm water, and a mild, non-abrasive soap.
- Undgå barske kemikalier: Do not use abrasive cleaners, scouring pads, strong acids, alkalis, or chlorine-based products, as these can damage the Duroplast surface and hinges.
- Tørring: After cleaning, wipe the seat dry with a soft, clean cloth to prevent water spots.
- Hængselpleje: Periodically check the tightness of the hinge bolts and tighten if necessary to prevent wobbling.
Fejlfinding
- Seat is Loose or Wobbles:
- Check the mounting nuts underneath the toilet bowl. Tighten them securely with an adjustable wrench or pliers. Do not overtighten.
- Ensure the hinges are correctly seated in the mounting holes.
- Seat Does Not Align Properly:
- Loosen the mounting nuts slightly, adjust the seat position until it is centered on the bowl, then re-tighten the nuts.
- Stains on the Seat:
- For minor stains, use a mild soap and water solution with a soft cloth.
- Avoid abrasive cleaners, as they can scratch the Duroplast surface.
Kundesupport
For further assistance, spare parts, or warranty inquiries, please contact Ideal Standard customer service directly. Information regarding spare parts availability for this specific model is not provided in this manual.
You can typically find contact information on the official Ideal Standard webhjemmeside eller gennem din forhandler.
