FERVE F-807 Lead Acid Battery Charger

Indledning

This manual provides detailed instructions for the safe and efficient operation of your FERVE F-807 Lead Acid Battery Charger. The F-807 is designed to charge all types of lead-acid batteries, supporting both 12-volt and 24-volt systems, with selectable charging currents of 4 amps og 8 amps. Please read this manual thoroughly before first use to ensure proper functionality and safety.

Vigtige sikkerhedsinstruktioner

• Tilslut altid opladeren til batteriet, før du tilslutter det til strømnettet.
• Disconnect the mains power supply before disconnecting the charger from the battery.
• Ensure adequate ventilation when charging batteries, as they can produce explosive gases.
• Avoid open flames or sparks near the battery during charging.
• Brug øjenbeskyttelse og handsker, når du håndterer batterier.
• Udsæt ikke opladeren for regn eller overdreven fugt.
• Opbevares utilgængeligt for børn.
• Hvis forsyningsledningen er beskadiget, skal den udskiftes af producenten, dennes serviceagent eller lignende kvalificerede personer for at undgå en fare.

Produktegenskaber

• Premium Charger for 12V and 24V lead-acid batteries.
• Selectable charging currents: 4 Amps og 8 Amps.
• Suitable for batteries with a capacity between 24 Ah and 95 Ah.
• Integrated analog Ammeter for charge indication.
• Robust metal casing for holdbarhed.

Produktkomponenter

Figur 1: Front view of the FERVE F-807 Battery Charger, showing the analog ammeter, voltage and current selector switches, and battery clamps.

• Analog Ammeter: Displays the charging current in DC Amps.
• Current Selector Switch (4A/8A): Allows selection of the desired charging current.
• Voltage Omskifter (12V/24V): Allows selection of the battery voltage, der skal opkræves.
• Positive (+) Battery Clamp (Rød): Forbindes til batteriets pluspol.
• Negative (-) Battery Clamp (Sort): Forbindes til batteriets negative pol.
• Netledning: Connects the charger to the AC power supply.
• Robust metal Casing: Beskytter interne komponenter.

Opsætning og første tilslutning

1. Forberedelse: Ensure the battery is in a well-ventilated area. Check the battery terminals for corrosion and clean them if necessary.
2. Placering af oplader: Place the charger on a stable, dry surface, away from direct sunlight or heat sources.
3. Voltage Valg: Before connecting, set the Voltage Vælgerkontakt (12V/24V) on the charger to match the voltage of the battery you intend to charge. Forkert voltage selection can damage the battery or charger.
4. Aktuelt udvalg: Indstil Current Selector Switch (4A/8A) to the desired charging current. For smaller batteries or slower charging, select 4A. For larger batteries or faster charging, select 8A. Refer to your battery's specifications for recommended charging rates.
5. Tilslut positiv Clamp: Tilslut RØD (+) batteri clamp til batteriets positive pol.
6. Tilslut negativ Clamp: Tilslut SORT (-) batteri clamp til den negative terminal på batteriet.
7. Tilslutning til elnettet: Only after both battery clamps are securely connected, plug the charger's mains power cord into a suitable AC power outlet (230V~50/60Hz).

Betjening af opladeren

1. Once connected to the battery and mains power, the charger will begin charging.
2. Overvåg Analogt amperemeter on the front panel. The needle will indicate the charging current. As the battery charges, the current will gradually decrease.
3. Charging time varies depending on the battery's capacity and discharge level. A fully discharged 95Ah battery charged at 8A will take approximately 12 hours to reach full charge.
4. When the ammeter needle drops to a very low reading (near 0-1 Amp), the battery is nearing full charge. For optimal battery life, it is recommended to disconnect the charger once the battery is fully charged.
5. Afbrydelsesprocedure:
   • Tag først opladeren ud af stikkontakten.
   • Dernæst skal du afbryde SORT (-) batteri clamp from the negative terminal.
   • Til sidst skal du afbryde RØD (+) batteri clamp from the positive terminal.

Vedligeholdelse og opbevaring

• Rensning: Frakobl opladeren fra alle strømkilder før rengøring. Tør c afasing med en tør eller let damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Kabelinspektion: Undersøg regelmæssigt strømkablet og batterikablerne for tegn på skader, flosning eller blotlagte ledninger. Brug ikke opladeren, hvis kablerne er beskadigede.
• Opbevaring: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective container to prevent dust accumulation.
• Batteripleje: Ensure battery terminals are clean and free of corrosion for efficient charging.

Fejlfinding Guide

Tekniske specifikationer

Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact FERVE customer service directly. Keep your proof of purchase for any warranty claims.

For further assistance, please visit the official FERVE webwebstedet eller kontakt din lokale forhandler.