KanexPro Full-Motion TV Wall Mount Instruction Manual

Indledning

This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your KanexPro Full-Motion Tilt/Swivel TV Wall Mount, model B00WGW533E. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.

Sikkerhedsoplysninger

• Vægt kapacitet: Overskrid ikke den maksimale vægtkapacitet på 30 kg. Dette beslag er designet til tv'er mellem 13 og 42 tommer.
• Vægtype: Ensure the mounting surface can safely support the combined weight of the mount and your television. This mount is suitable for wood stud, solid block, or concrete walls. Do not install on drywall alone.
• Professionel installation: Hvis du er usikker på installationsprocessen eller din vægs egnethed, bør du kontakte en kvalificeret fagmand.
• Værktøjer: Brug passende værktøj og sikkerhedsudstyr under installationen.
• Børn: Keep children away during installation. Small parts can be a choking hazard.
• Screw Compatibility: Always use the correct screws for your TV's VESA mounting holes. Incorrect screws can damage your TV.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes. Hvis der mangler eller er beskadigede dele, skal du kontakte kundesupport.

• Vægplademontering
• TV-beslagarme (2)
• Monteringssæt (skruer, ankre, skiver, afstandsstykker)
• Kabelhåndteringsklip
• Instruktionsmanual

Billede 1: Forside view of the KanexPro Full-Motion TV Wall Mount, showing the articulating arm and TV mounting plate.

Opsætning og installation

Følg disse trin omhyggeligt for en sikker installation.

Step 1: Determine Wall Type and Location

• Locate a suitable position on your wall, ensuring it is free from electrical wires or plumbing.
• Use a stud finder to locate wood studs if mounting to a wood stud wall. Mark the center of the studs.
• For concrete or solid block walls, ensure the wall is structurally sound.

Trin 2: Monter vægpladen

1. Position the wall plate at the desired height and level it. Mark the drilling locations through the holes on the wall plate.
2. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the anchors provided.
3. Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached and level.

Billede 2: Side view of the wall mount fully extended, illustrating its articulating capability.

Trin 3: Fastgør tv-beslag til fjernsynet

1. Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade.
2. Identify the VESA mounting holes on the back of your TV. This mount supports VESA patterns: 75x75mm, 100x100mm, 200x100mm, and 200x200mm.
3. Select the correct diameter and length screws from the hardware kit that fit your TV's mounting holes. Use washers and spacers if necessary to ensure a snug fit without overtightening.
4. Attach the two TV bracket arms to the back of your television. Ensure they are securely fastened and level with each other.

Trin 4: Monter fjernsynet på vægpladen

1. Løft forsigtigt fjernsynet op med de medfølgende beslag med hjælp.
2. Hook the TV bracket arms onto the wall plate. Ensure the TV is securely seated on the wall plate.
3. Engage any safety locking mechanisms on the TV brackets to prevent accidental dislodgement.

Trin 5: Kabelstyring

Use the provided cable management clips to route and secure cables along the articulating arm, ensuring they do not interfere with the mount's movement or become pinched.

Betjening af monteringen

This full-motion mount offers flexibility for optimal viewing vinkler.

• Drejelig: The mount allows for 90 degrees of swivel (left to right). Gently push or pull the TV to adjust the horizontal viewvinkel.
• Vip: The mount can tilt from +20 to -20 degrees. Loosen the tilt adjustment knobs (if present) on the TV brackets, adjust the screen to the desired vertical angle, and then retighten the knobs to secure the position.
• Udvidelse: The articulating arm allows the TV to extend from 3.9 inches (100mm) when folded flat to the wall, up to 15.4 inches (391mm) when fully extended.

Opretholdelse

• Rensning: Tør holderen af ​​med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Periodiske kontroller: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre. Efterspænd om nødvendigt.
• Smøring: No lubrication is typically required for this type of mount.

Fejlfinding

• TV'et er ikke i vater: Ensure the wall plate was installed level. If the TV brackets allow for minor rotational adjustment, correct it. Otherwise, you may need to re-adjust the wall plate.
• Screws Don't Fit TV: Verify your TV's VESA pattern and screw requirements. The mount includes a variety of screws, but some TVs may require specific sizes not included. Consult your TV's manual or a hardware store.
• Fæstet føles løst: Immediately remove the TV and re-check all wall plate and TV bracket connections. Ensure all screws are tightened to the appropriate torque and that the wall anchors are properly installed.

Specifikationer

Image 3: Dimensional drawing showing key measurements and movement ranges of the wall mount.

Garanti og support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official KanexPro webwebsted. Gem din købsbevis til garantikrav.