1. Introduktion
Produkt overview
The Hozelock 15-Pot Drip Watering Kit is designed to provide an efficient and precise watering solution for up to 15 potted plants, hanging baskets, borders, vegetable patches, and greenhouse plants. This automatic drip irrigation system helps conserve water and time by delivering water directly to the plant roots, minimizing waste.
The kit includes a mechanical timer, allowing for automated watering cycles from 5 minutes up to 2 hours. This ensures your plants receive consistent hydration, promoting healthier growth.
Image 1.1: Hozelock 15-Pot Drip Watering Kit packaging, showing the mechanical timer and drippers.
Image 1.2: The Hozelock Drip Watering Kit installed on a patio, watering several potted plants.
2. Sikkerhedsoplysninger
This kit includes general safety instructions for the use and handling of the drip irrigation system. Please read and understand all instructions before installation and operation to ensure safe use.
3. Pakkens indhold
The Hozelock 15-Pot Drip Watering Kit includes the following components:
- 1 x Mechanical Water Timer (Model 2210 0000)
- 1 x trykregulator
- 15 meters of 4mm diameter hose
- 15 x Drippers with stakes (4 L/h flow rate per dripper)
- Assorted connectors and end caps for hose assembly
4. Opsætningsvejledning
Follow these steps to install your Hozelock 15-Pot Drip Watering Kit:
4.1. Step 1: Connect the Control Unit
- Attach the mechanical timer (1) to your outdoor tap. Ensure a secure, watertight connection.
- Connect the pressure regulator (2) to the outlet of the mechanical timer. This regulates water pressure for optimal drip performance.
Image 4.1: Diagram illustrating the connection of the mechanical timer (1) and pressure regulator (2) to a water tap.
4.2. Step 2: Lay the Pipeline
- Connect the 4mm diameter hose to the outlet of the pressure regulator.
- Lay the hose around your potted plants, cutting it to appropriate lengths as needed to reach each pot. Use the provided connectors to create branches or extend the pipeline (3, 4).
- Ensure the hose is positioned discreetly and securely.
Image 4.2: Diagram demonstrating how to lay the 4mm hose and use connectors (3, 4) to create a pipeline for multiple pots.
4.3. Step 3: Install Drippers
- At each plant pot location, insert a dripper with its stake (5) into the soil near the base of the plant.
- Connect the 4mm hose directly to the dripper. Ensure the connection is firm to prevent leaks.
- Repeat for all 15 pots.
Image 4.3: Diagram illustrating the installation of a dripper with a stake (5) into a plant pot.
5. Betjeningsvejledning
5.1. Mechanical Timer Operation
The Hozelock mechanical timer allows for simple, manual control of your watering schedule:
- To activate watering, manually turn the dial on the timer to the desired duration. The timer can be set for periods ranging from 5 minutes up to 120 minutes.
- Once the set time elapses, the timer will automatically shut off the water flow.
- This timer requires manual activation for each watering cycle. It does not feature automatic daily programming.
6. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your drip watering kit:
- Tjek for blokeringer: Periodically inspect drippers for any debris or mineral buildup that might restrict water flow. Clean them as necessary.
- Inspicer slanger: Check all hoses for kinks, damage, or signs of wear. Replace any damaged sections to prevent leaks.
- Bekræft forbindelser: Ensure all hose connections and the timer connection to the tap remain secure and watertight. Tighten if any leaks are observed.
- Vinteropbevaring: Before the first frost, disconnect the system from the tap, drain all water from the hoses and components, and store the kit in a dry, frost-free location.
7. Fejlfinding
| Spørgsmål | Mulig årsag | Løsning |
|---|---|---|
| Vandlækager ved tilslutninger | Loose connections, damaged seals, excessive water pressure. | Ensure all connections are tightened securely. Check rubber washers and seals for damage and replace if necessary. The included pressure regulator should manage pressure; if leaks persist, verify its proper installation. |
| Uneven watering or some pots remain dry | Blocked drippers, insufficient water pressure, kinks in the hose, incorrect dripper placement. | Inspect drippers for blockages and clean them. Ensure the main tap is fully open. Straighten any kinks in the hose. Verify that drippers are positioned correctly in the soil. |
| Timer not activating water flow | Timer not set correctly, tap not open, system disconnected. | Ensure the timer dial is manually turned to the desired watering duration. Confirm the outdoor tap is fully open. Check that the timer and pressure regulator are securely connected to the tap. |
| Missing components upon unboxing | Emballagefejl. | Carefully check all packaging materials. If components are genuinely missing, contact the retailer or Hozelock customer support with your purchase details. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | 2802 0000 |
| Slange længde | 15 meters (4mm diameter) |
| Number of Drippers | 15 |
| Dripper Flow Rate | 4 liters per hour per dripper |
| Timer type | Mechanical (manual activation) |
| Timervarighed | Op til 120 minutter |
| Strømkilde | Vandtryk |
| Produktmål (L x B x H) | 19.75 x 39.75 x 59.5 cm |
| Varens vægt | 721 gram |
| Materiale | See product description |
9. Garanti og support
9.1. Garantioplysninger
This Hozelock Drip Watering Kit comes with a 2 års garantiperiode fra købsdatoen. Gem venligst dit købsbevis for eventuelle garantikrav.
9.2. Kundesupport
For technical assistance, missing parts, or warranty inquiries, please contact your retailer or visit the official Hozelock webwebsted for kundesupportmuligheder.
