Indledning
This manual provides essential instructions for the safe assembly, operation, and maintenance of your George Kovacs P305-3-654-L George's Reading Room LED Floor LampLæs venligst denne manual grundigt inden installation, og gem den til senere brug.
Image: George Kovacs P305-3-654-L George's Reading Room LED Floor Lamp, visasing its sleek, modern design with a chiseled nickel finish and a circular LED light head.
Sikkerhedsoplysninger
Følg altid grundlæggende sikkerhedsforanstaltninger ved installation og betjening af elektriske produkter for at reducere risikoen for brand, elektrisk stød og personskade.
- Ensure the power is OFF at the main circuit breaker before installation or maintenance.
- Dette produkt er kun beregnet til indendørs brug.
- Betjen ikke lamp med en beskadiget ledning eller stik.
- Undgå at placere lamp in areas where it can be easily tipped over.
- Do not attempt to modify or repair the LED components; contact qualified personnel for service.
- Hold brændbare materialer væk fra lamp.
Pakkens indhold
Carefully unpack all components and inspect for any damage. Keep all packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to assemble or operate the lamp. Contact customer service for assistance.
- Lamp Head with LED Module (P305-3-044-L)
- Øvre Polafsnit
- Middle Pole Section(s) (if applicable)
- Lower Pole Section
- Lamp Grundlag
- Strømledning med stik
- Monteringshardware (skruer, skiver osv.)
Montering og opsætning
Følg disse trin for at samle dit gulvamp:
- Fastgør basen: Carefully thread the lower pole section into the lamp Drej med uret, indtil den er fastspændt. Sørg for, at netledningen føres frit gennem basen.
- Saml stangsektioner: Connect the middle pole section(s) (if included) to the lower pole section by threading them together. Then, attach the upper pole section to the assembled pole. Ensure all connections are tight.
- Vedhæft Lamp Hoved: Fastgør forsigtigt l'enamp head with the LED module to the top of the upper pole section. Ensure the electrical connection is secure and the head is firmly seated.
- Placer Lamp: Placer den samlede lamp on a flat, stable surface. Ensure the power cord is not pinched or obstructed.
- Tilslut til strøm: Sæt netledningen i en standard 120V AC stikkontakt.
Billede: Nærbillede view af lamp head's adjustable hinge mechanism, showing the chiseled nickel finish and the connection point to the lamp arm.
Betjeningsvejledning
Dette LED gulv lamp features a dimmable function for adjustable light output.
- Tænd/sluk: Find tænd/sluk-knappen, typisk på l'enamp pole or cord. Press once to turn the lamp ON, and again to turn it OFF.
- Dæmpningsfunktion: Hvis din lamp includes a dimmer, it may be integrated into the power switch or a separate control. Follow the specific instructions provided with your lamp for dimming operation. Typically, holding the button or rotating a knob will adjust brightness.
- Justering af Lamp Hoved: Lamp head is adjustable. Gently pivot the head to direct light as desired. Do not force the movement beyond its intended range.
Opretholdelse
Proper care ensures the longevity and performance of your lamp.
- Rensning: Afbryd lamp Sluk for strømmen før rengøring. Brug en blød, tør klud til at tørre l'en af.ampoverflader. Brug ikke slibende rengøringsmidler, opløsningsmidler eller polermidler, da de kan beskadige finishen.
- LED-pleje: The integrated LED module is designed for long life and does not require bulb replacement. Do not attempt to disassemble the LED light source.
- Ledningsinspektion: Periodically inspect the power cord for any signs of damage, fraying, or cuts. If damage is found, discontinue use and contact a qualified electrician or the manufacturer.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lamp lyser ikke. | No power to the outlet; loose connection; faulty switch. | Check if the outlet is live; ensure the plug is fully inserted; check the lamp's power switch. |
| Light is flickering or dim. | Loose connection; incompatible dimmer (if external); LED module issue. | Ensure all connections are secure; if using an external dimmer, verify compatibility; contact customer service if the issue persists. |
| Lamp er ustabil. | Base not securely attached; uneven surface. | Tighten the base connection; place the lamp på en flad, plan overflade. |
If you experience issues not listed here or if the problem persists after attempting the solutions, please contact George Kovacs customer support.
Specifikationer
- Model: P305-3-654-L
- Mærke: GEORGE KOVACS
- Type: LED gulv Lamp
- Udfør type: Brushed (Chiseled Nickel)
- Produktdimensioner: 10 cm D x 16 cm B x 71 cm H (omtrentlig)
- Varens vægt: 7 pund
- Skyggemateriale: Aluminium, jern
- Stil: Nutidige
- Speciel funktion: Dæmpbar
- Lyskildetype: LED
- Materiale: Aluminum, Iron, Nickel
- Antal lyskilder: 2
- Wattage: 26 watt
- Voltage: 120 volt
- Certificering: ETL
- UPC: 844349017363
Garanti og support
For warranty information, please refer to the documentation included with your product at the time of purchase or visit the official George Kovacs website. For technical support or replacement parts, please contact George Kovacs customer service directly.
Fabrikant: George Kovacs
