Indledning
This manual provides detailed instructions for the safe and effective use of your Petrainer PETDBB-2 Dog Training E-Collar. This system is designed to assist in training your dog using static stimulation, vibration, and beep modes. Please read this manual thoroughly before use to ensure proper operation and to maximize training effectiveness.
Vigtige sikkerhedsoplysninger
Your dog's safety and comfort are paramount. Please observe the following guidelines:
- This training collar is intended for training purposes only, not for punishment.
- Do not leave the collar on your dog for more than 12 hours per day to prevent skin irritation.
- Regularly check your dog's neck for any signs of irritation or sores. If irritation occurs, discontinue use until the skin heals.
- Ensure the contact points are properly positioned on your dog's skin for effective operation.
- Always start with the lowest stimulation level and increase gradually as needed.
- Denne enhed er ikke et legetøj. Holde utilgængeligt for børn.
- Do not use this collar on aggressive dogs. Consult a professional trainer for such cases.
- The collar receiver is waterproof, but the remote transmitter is not designed for submersion.
Pakkens indhold
- 1 x fjernbetjening
- 2 x Collar Receivers
- 2 x Adjustable TPU Belts
- 6 Sets of Contact Points (various lengths)
- 1 x testpære
- 1 x USB ladekabel
- 1 x Brugermanual (dette dokument)

Image: Petrainer PETDBB-2 Dog Training E-Collar components, including the remote and two collar receivers.
Produktegenskaber
- 3 træningstilstande: Static stimulation, vibration, and beep.
- Vandtæt modtager: The collar receiver is designed to be waterproof (IP67 rated), suitable for dogs that swim.
- Genopladeligt: Both the remote transmitter and collar receivers are rechargeable.
- Fjern række: Up to 330 yards (approximately 300 meters) using RF434Mhz technology.
- Justerbare niveauer: Vibration and static stimulation levels are adjustable from 0-100.
- Skin-Friendly Contact Points: Soft silicone covers for contact points help protect your pet's skin.
- Støtte til flere hunde: One remote can control up to two collar receivers.

Image: Dog swimming with the waterproof Petrainer collar receiver.

Image: Dog running in a field, demonstrating the remote's range.
Opsætning og Kom godt i gang
1. Opladning af enhederne
Before first use, fully charge both the remote transmitter and the collar receivers. The devices come with a USB charging cable. Connect the cable to the charging ports on the remote and receivers, then plug into a USB power source (e.g., PC, laptop, phone charger, power bank).

Image: Remote and receiver charging via USB.
2. Turning On/Off the Remote
- To turn on the remote: Press the "M" button for 2 seconds.
- To turn off the remote: Press the "M" button for 3 seconds.
3. Tilpasning af halsbåndsmodtageren
Proper fit of the collar receiver is crucial for effective and safe operation. The contact points must have direct contact with your dog's skin.
- Select the appropriate length of contact points based on your dog's coat length. Longer points are for thicker coats.
- Place the receiver on your dog's neck, ensuring the contact points are underneath and touching the skin.
- Adjust the strap so it is snug but not too tight. You should be able to fit one finger comfortably between the strap and your dog's neck.
- The collar should not be worn for more than 12 hours a day.

Image: Collar size guide, showing suitability for various dog sizes.

Image: Various contact point lengths for different coat types.
Betjeningsvejledning
Træningstilstande
The Petrainer PETDBB-2 offers three distinct training modes:
- Bip-tilstand: Emits an audible tone. This is often used as an initial warning or for positive reinforcement.
- Vibrationstilstand: Delivers a non-harmful vibration. Levels are adjustable from 0-100. This mode is generally recommended for basic obedience training.
- Statisk stimuleringstilstand: Provides a static pulse. Levels are adjustable from 0-100. This mode should be used as a last resort and at the lowest effective level.

Image: Illustration of Beep, Vibration, and Static Stimulation modes.
Using the Remote Transmitter
The remote allows you to switch between modes and adjust intensity levels. The display shows the current level and selected dog (if training two dogs).
- Mode knap: Cycles through Beep, Vibration, and Static Stimulation modes.
- Level Adjustment Buttons: Used to increase or decrease the intensity level for Vibration and Static Stimulation.
- Dog Selection Button (1/2): If you have two receivers, use this button to select which dog you are training.
- Aktiveringsknap: Press to deliver the selected correction.
The remote will remember the last settings for each dog. The collar receivers will go into a sleep mode if the dog is inactive, but will wake up automatically when the dog moves, conserving battery life.
Træningstips
Effective training requires patience and consistency. Follow these general tips:
- Keep training sessions short and positive, ideally 10-15 minutes each.
- Train one dog at a time to avoid confusion.
- Begin training in a familiar, distraction-free outdoor environment.
- Use a long leash attached to a non-metallic collar during initial training to maintain control.
- Teach your dog a command verbally before reinforcing it with the training collar.
- For basic obedience, vibration mode is often more effective than static stimulation.
- Issue one obedience command at a time. Do not use the training system for commands your dog has not yet learned.
- Always praise and reward positive behavior immediately. Avoid over-correcting.
- End each session on a positive note. Stop training and play with your dog once a new level of proficiency is achieved.
Opretholdelse
- Clean the collar receiver and strap regularly with a damp klæde.
- Sørg for, at opladningsportene er tørre, før du oplader.
- Opbevar enheden et rent og tørt sted, når den ikke er i brug.
- Kontrollér kontaktpunkterne regelmæssigt for slitage. Udskift dem om nødvendigt.
Fejlfinding
| Problem | Mulig løsning |
|---|---|
| Halsbåndet virker ikke / Ingen reaktion |
|
| Hund reagerer ikke på stimulering |
|
| Hudirritation på hundens hals |
|
| Remote display not working |
|
Specifikationer
- Modelnavn: Dog Training Collar PETDBB-2
- Varemodelnummer: PETDBB-2
- Fjern række: Up to 330 yards (RF434Mhz technology)
- Træningstilstande: Biplyd, vibration (0-100 niveauer), statisk stimulering (0-100 niveauer)
- Modtager vandtæt vurdering: IP67
- Batterier: 3 Lithium Metal batterier påkrævet (medfølger)
- Materiale: Silikone, termoplastisk polyurethan
- Justerbar kravestørrelse: 3-25 tommer
- Varens vægt: 1.01 pund (samlet pakke)
- Produktdimensioner: 7.5 x 5.7 x 2.2 cm (pakke)
Garanti og support
Petrainer offers a 1 års garanti on this product. You can register your product after purchase to receive an extended 3 års garanti.
For any issues or support, please contact Petrainer US-based Customer Service. Support is available via phone and email 5 days a week.
Refer to the contact information provided with your product packaging or visit the official Petrainer webwebstedet for aktuelle supportoplysninger.




