Datalogic QuickScan I QBT2131 håndholdt stregkodescanner brugermanual

1. Introduktion

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Datalogic QuickScan I QBT2131 Handheld Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Pakkens indhold

Bekræft, at alle varer er til stede i din produktpakke:

• Datalogic QuickScan I QBT2131 Handheld Barcode Scanner
• USB kabel
• Lithium-ion-batteri (forinstalleret eller separat)
• Hurtigstartguide (hvis relevant)

Note: An AC adapter for charging may be sold separately.

3. Produktet er slutview

The Datalogic QuickScan I QBT2131 is a 1D linear imager barcode scanner designed for efficient data capture in retail and warehouse environments. It features Bluetooth wireless technology for flexible operation and a durable design.

Figur 1: Datalogic QuickScan I QBT2131 Handheld Barcode Scanner in its charging cradle. The scanner is dark gray with a blue trigger button, and the cradle is also dark gray with two indicator lights on its front panel.

Komponenter:

• Scanner Head: Contains the imaging window and scanning engine.
• Udløserknap: Activates the scanning beam.
• Håndtag: Ergonomisk greb for komfortabel brug.
• Charging/Communication Base: Provides power and data connection.
• Indikatorlys: On the scanner and base, indicating status (e.g., battery, connection).

4. Opsætning

4.1. Batteriinstallation og opladning

1. Installer batteri: If the battery is not pre-installed, open the battery compartment cover on the scanner handle and insert the Lithium-ion battery, ensuring correct polarity. Close the cover securely.
2. Indledende opkrævning: Place the scanner into its charging base. Connect the USB cable to the charging base and then to a powered USB port on a computer or a compatible USB power adapter (sold separately). The charging indicator light on the base will illuminate, typically amber or red, during charging and turn green when fully charged. Allow approximately 4 hours for a full charge before first use.

4.2. Connecting the Base to a Host Device

The charging base serves as the communication interface for the scanner.

1. USB-forbindelse: Connect one end of the provided USB cable to the USB port on the charging base. Connect the other end of the USB cable to an available USB port on your computer or host system.
2. Driver installation: Dit operativsystem burde automatisk registrere og installere de nødvendige drivere. Følg instruktionerne på skærmen, hvis du bliver bedt om det.

4.3. Pairing the Scanner via Bluetooth

The QBT2131 scanner uses Bluetooth to communicate wirelessly with its base or other Bluetooth-enabled host devices.

1. Tænd: Ensure the scanner is charged and powered on.
2. Gå ind i parringstilstand: Refer to the Quick Start Guide or Datalogic's official documentation for the specific barcode sequence to put the scanner into Bluetooth pairing mode. This usually involves scanning a special "Pairing Mode" barcode.
3. Pair with Base: If pairing with its dedicated base, place the scanner into the base while it is in pairing mode. The scanner and base will automatically attempt to establish a connection.
4. Pair with Host (Direct): If pairing directly with a Bluetooth-enabled computer or mobile device, search for Bluetooth devices on your host. Select "Datalogic QBT2131" (or similar) from the list and follow any on-screen prompts to complete the pairing process.
5. Bekræftelse: A successful connection is typically indicated by a specific LED pattern or an audible beep from the scanner.

5. Betjeningsvejledning

5.1. Grundlæggende scanning

1. Sigte: Point the scanner's imaging window at the barcode you wish to scan.
2. Udløser: Press and hold the trigger button. A red aiming line will appear.
3. Scan: Position the aiming line across the entire barcode. Once successfully read, the scanner will emit an audible beep and/or the green "good read" LED will illuminate.
4. Frigøre: Slip udløserknappen.

Ensure the barcode is clean and flat for optimal scanning performance.

5.2. Indicator Lights and Sounds

• Green LED (Scanner/Base): Good read, fully charged battery, or connected.
• Red/Amber LED (Scanner/Base): Charging, low battery, or error.
• Bip: Indicate successful reads, errors, or mode changes. Consult the full product reference guide for specific beep codes.

6. Vedligeholdelse

6.1. Rengøring af scanneren

• Brug en blød, ren kludamprengøres med vand eller en mild, ikke-slibende rengøringsopløsning.
• Gently wipe the scanner's exterior, especially the imaging window.
• Do not use harsh chemicals, abrasive cleaners, or immerse the device in liquid.

6.2. Batteripleje

• Oplad batteriet regelmæssigt for at opretholde optimal ydeevne.
• Undgå ekstreme temperaturer, da disse kan forringe batteriets levetid.
• If the scanner will not be used for an extended period, store it with a partial charge (around 50%) in a cool, dry place.

7. Fejlfinding

If the problem persists, please contact Datalogic customer support.

8. Specifikationer

• Model: QBT2131-BK-BTK1
• Dimensioner: 1.61 x 3.58 x 6.42 tommer
• Vægt: 6.7 ounce
• Forbindelse: USB-kabel, Bluetooth
• Imager Type: 1D Lineær Imager
• Batteri: 1 lithium-ion batteri (medfølger)
• Kompatible enheder: Stationær, bærbar
• Farve: Sort
• Fabrikant: Datalogic SpA

9. Garantioplysninger

Datalogic products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Datalogic webwebsted. Gem din købsbevis til garantikrav.

10. Kundesupport

For technical assistance, product inquiries, or service, please contact Datalogic customer support through their official website or the contact information provided in your product documentation. You may also find additional resources, FAQs, and software downloads on the Datalogic support portal.