Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your Rev-A-Shelf RV-12PB-LE White Steel Pull-Out Waste Container. Designed for efficient waste management within your kitchen cabinetry, this unit features a durable steel frame, a 35-quart container, and a full-extension ball-bearing slide system for smooth operation. Please read all instructions carefully before proceeding with installation and use.
Image: The Rev-A-Shelf RV-12PB-LE White Steel Pull-Out Waste Container, featuring a white plastic bin, a white steel wire frame, and a white lid, all mounted on a pull-out slide system.
Opsætning og installation
Proper measurement of your cabinet opening is crucial for a successful installation. This product is designed for base or lower cabinets. Ensure you have the correct minimum cabinet opening dimensions before purchasing og installation.
Measuring Your Cabinet Opening
To determine the correct size organizer for your cabinet, you need to measure the minimum cabinet opening width, height, and depth. Consider any obstructions such as plumbing or hinges.
Video: An official Rev-A-Shelf guide demonstrating how to correctly measure cabinet openings for various products, including face frame and frameless cabinets, and considering width, height, and depth.
- Bredde: Measure the side-to-side dimension of your cabinet's opening. Account for any door hinges that might obstruct the pull-out mechanism.
- Højde: Measure from the bottom of the cabinet opening to the top.
- Dybde: Measure from the outside front edge of the cabinet to the back wall.
Image: A diagram illustrating how to measure cabinet openings for both full access (frameless) and face frame cabinets, highlighting width, depth, and height measurements.
Installationstrin
The Rev-A-Shelf RV-12PB-LE unit features a simple 4-screw installation process. The package includes the white 35-quart container, a 16-inch depth white frame, a lid, and all necessary mounting hardware.
- Position the slide system base inside your cabinet opening, ensuring it is centered and aligned with the cabinet front.
- Mark the four screw locations through the pre-drilled holes in the base.
- Secure the base to the cabinet floor using the provided mounting hardware.
- Place the 35-quart waste container into the steel frame.
- Sæt låget på beholderen.
Ensure the unit slides smoothly in and out without obstruction from cabinet doors or hinges. If your cabinet door is designed to be mounted directly to the pull-out unit, refer to the specific instructions provided with the optional door mount kit (sold separately).
Betjeningsvejledning
Your Rev-A-Shelf pull-out waste container is designed for ease of use and durability.
- Pull-Out Mechanism: To access the waste container, gently pull the front of the unit. The 100lb full-extension ball-bearing slide system allows the container to extend completely out of the cabinet for easy access and removal.
- Lukning af enheden: To close, push the unit back into the cabinet until it is fully recessed.
- Brug af låg: The included lid helps contain odors and keep contents out of sight. It can be easily removed for emptying the container.
Image: The Rev-A-Shelf pull-out waste container fully extended from a kitchen cabinet, showing the white container and steel frame.
Image: The Rev-A-Shelf pull-out waste container fully recessed into a kitchen cabinet, with the cabinet door closed.
Opretholdelse
Regular cleaning and maintenance will ensure the longevity and smooth operation of your waste container.
- Beholder og låg: The white plastic container and lid can be cleaned with mild soap and water. Avoid abrasive cleaners that may scratch the surface.
- Stålramme: Tør stålrammen af med reklameamp klud og et mildt rengøringsmiddel. Tør grundigt for at forhindre rust.
- Slide System: Periodically check the ball-bearing slides for any debris. Clean with a dry cloth. Lubrication is generally not required for these types of slides.
Fejlfinding
- Unit does not slide smoothly:
- Check for any obstructions in the cabinet or along the slide tracks.
- Ensure the mounting screws are securely tightened.
- Verify that the cabinet opening dimensions meet the product requirements, especially the width, to avoid friction with cabinet sides or hinges.
- Container does not fit:
- Re-measure your cabinet opening carefully, referring to the 'Measuring Your Cabinet Opening' section and the provided video.
- Confirm that the product model number matches your intended purchase.
Specifikationer
- Mærke: Rev-A-Shelf
- Modelnummer: RV-12PB-LE
- Kapacitet: 35 Quarts
- Farve: Hvid
- Materiale: Steel (frame), Plastic (container, lid)
- Åbningsmekanisme: Udtræk
- Samlede dimensioner: 10.5 cm B x 15.75 cm D x 20.375 cm H
- Produktmål (samlet): 16.06 cm L x 10.46 cm B x 20.38 cm H
- Slide System: 100lb Full-Extension Ball-Bearing
- Varens vægt: 7.2 pund
- UPC: 090713048710
Garanti og support
For warranty information or technical support regarding your Rev-A-Shelf RV-12PB-LE Pull-Out Waste Container, please refer to the manufacturer's official website or contact their customer service department directly. Contact details are typically available on the product packaging or the Rev-A-Shelf webwebsted.
