1. Introduktion
This manual provides essential instructions for the proper installation and use of the Orbit BHT-1 Electric Box 24-inch T-Bar Bracket. This bracket is designed to securely mount electrical boxes to standard T-bar ceiling grids.
The Orbit BHT-1 is specifically engineered for use with electrical boxes that are 1-1/2 inches or 2-1/8 inches deep. Adherence to these instructions ensures safe and effective installation.
2. Sikkerhedsoplysninger
ADVARSEL: Always disconnect power at the circuit breaker or fuse box before installing or servicing electrical components. Failure to do so may result in serious injury or death.
- Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring and building codes.
- Sørg for, at alle lokale og nationale elektriske forskrifter følges under installationen.
- The Orbit BHT-1 bracket conforms to UL514A and is acceptable for use in 2-hour fire-rated walls.
- Do not exceed the maximum load capacity of the T-bar ceiling grid or the bracket.
3. Produktet er slutview
The Orbit BHT-1 is a 24-inch T-Bar bracket designed for robust support of electrical boxes in suspended ceiling applications. It features a durable construction suitable for various electrical installations.
Figure 1: Orbit BHT-1 24-inch T-Bar Bracket. This image displays a line drawing of the Orbit BHT-1 24-inch T-Bar bracket. It shows a long, slender bar with mounting clips at each end and a central mounting point, designed for securing electrical boxes to a T-bar ceiling grid.
Nøglefunktioner:
- 24-inch length for standard T-bar spacing.
- Compatible with 1-1/2" or 2-1/8" deep electrical boxes.
- UL file E227970, er i overensstemmelse med UL514A.
- Acceptable for use in 2-hour fire-rated walls.
4. Specifikationer
| Attribut | Værdi |
|---|---|
| Mærke | Orbit |
| Modelnummer | BHT-1 |
| Produktdimensioner | 1.5" D x 24" B x 24" H |
| Materiale | Kobber |
| Finish Type | Unfinished or Zinc Plated |
| Installationstype | Loftsmonteret |
| Varens vægt | 2.88 ounce |
| Specifikation Met | UL E227970, UL514A |
| UPC | 835243001305 |
5. Opsætning og installation
Follow these steps to properly install the Orbit BHT-1 T-Bar bracket:
- Forbered området: Ensure the power to the installation area is turned off at the main circuit breaker. Clear any obstructions in the ceiling grid where the electrical box will be mounted.
- Identify T-Bar Location: Locate the T-bar members in the suspended ceiling grid where the electrical box needs to be positioned. The bracket is designed for standard 24-inch spacing.
- Attach to T-Bar: Position the Orbit BHT-1 bracket across the T-bar members. The clips at each end of the bracket are designed to securely grip the T-bar. Ensure the bracket is centered and level.
- Mount Electrical Box: Attach the electrical box (1-1/2" or 2-1/8" deep) to the central mounting point of the BHT-1 bracket. Use appropriate screws or fasteners to secure the box firmly to the bracket. Ensure the box is oriented correctly for wiring access.
- Bekræft sikkerhed: After installation, gently tug on the electrical box and bracket to ensure they are securely fastened to the T-bar grid and that there is no excessive movement.
- Gendan strøm: Once the electrical box is securely mounted and all wiring is complete and inspected, restore power to the circuit.
Note: This bracket is suitable for installations in 2-hour fire-rated walls, provided all other components and installation methods comply with relevant fire safety codes.
6. Functionality and Usage
The Orbit BHT-1 T-Bar bracket serves as a stable and compliant support for electrical boxes in suspended ceiling environments. Once installed, its primary function is to hold the electrical box securely in place, allowing for safe and organized electrical wiring within the ceiling plenum.
Proper installation ensures the electrical box remains stationary, preventing movement that could damage wiring or compromise the integrity of the electrical system. The bracket's design facilitates easy integration into existing T-bar ceiling structures.
7. Vedligeholdelse
The Orbit BHT-1 T-Bar bracket requires minimal maintenance. Periodic inspection is recommended to ensure continued structural integrity and secure attachment.
- Visuel inspektion: Annually, or as part of routine building maintenance, visually inspect the bracket and its connection to the T-bar and electrical box for any signs of corrosion, damage, or loosening.
- Tæthedskontrol: If accessible and safe to do so, verify that the electrical box remains tightly secured to the bracket.
- Rensning: If necessary, gently wipe the bracket with a dry cloth to remove dust or debris. Do not use harsh chemicals.
If any damage or instability is observed, consult a qualified professional for assessment and repair or replacement.
8. Fejlfinding
This section addresses common issues that may arise during or after the installation of the Orbit BHT-1 T-Bar bracket.
- Issue: Bracket does not fit T-bar securely.
Løsning: Ensure the T-bar is a standard size compatible with the bracket's clips. Verify that the bracket is correctly aligned and fully engaged with the T-bar flanges. If the T-bar is non-standard or damaged, it may require modification or replacement by a qualified professional.
- Issue: Electrical box feels loose after installation.
Løsning: Check that the screws or fasteners used to attach the electrical box to the bracket are appropriate for the box material and are tightened securely. Ensure the electrical box depth (1-1/2" or 2-1/8") matches the bracket's compatibility. Re-tighten all connections, ensuring not to overtighten and strip threads.
- Issue: Bracket appears corroded or damaged.
Løsning: If the bracket shows significant signs of corrosion or physical damage, it should be replaced immediately to maintain structural integrity and safety. Do not attempt to repair a damaged bracket.
For issues not covered here, or if you are unsure about any aspect of installation or safety, contact a qualified electrician or the manufacturer for assistance.
9. Garanti og support
Specific warranty information for the Orbit BHT-1 Electric Box 24-inch T-Bar Bracket should be obtained directly from the manufacturer, Orbit. Please refer to the product packaging or the official Orbit webhjemmeside for detaljerede garantivilkår.
For technical support, product inquiries, or to report any issues, please visit the official Orbit website or contact their customer service department. You can find more information about Orbit products at their Amazon butik.
