Indledning
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Pakkens indhold
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- Scannerstativ
- (USB) Connection Cable (sold separately or included depending on package)
- Dokumentation (denne manual)
Note: The connection cable is required for operation and may be sold separately.
Opsætning
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- Pak scanneren ud: Carefully remove the scanner and its stand from the packaging.
- Saml stativet: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- Tilslut kablet: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- Tænd: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- Driverinstallation (hvis nødvendigt): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
Betjeningsvejledning
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
Håndholdt scanning
- Pick Up the Scanner: Remove the scanner from its stand.
- Aim and Scan: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- Confirm Scan: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- Placer element: Position the barcode of the item in front of the scanner's window while it is in its stand.
- Automatisk registrering: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- Confirm Scan: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
Opretholdelse
Korrekt vedligeholdelse sikrer scannerens levetid og optimale ydeevne.
- Rensning: Brug en blød, fnugfri klud lidt dampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- Opbevaring: Når scanneren ikke er i brug, skal den opbevares et rent, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
- Kabelpleje: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
Fejlfinding
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Scanneren tænder ikke. | USB-kabel ikke tilsluttet eller defekt. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port or cable. |
| Scanneren læser ikke stregkoder. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| Scannede data vises forkert. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| Scanner beeps but no data is transmitted. | Application not in focus or incorrect interface mode. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic webwebsted.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | HD3130-BK |
| Scanner type | 1D Stregkodescanner |
| Scanningshastighed | 270 scanninger/sekund |
| Forbindelsesteknologi | USB kabel |
| Strømkilde | Ledningsbaseret elektrisk (via USB) |
| Kompatible enheder | Stationær, bærbar |
| Varens vægt | 1.28 pund (ca. 0.58 kg) |
| Produktdimensioner | 7.5 x 8.8 x 4.1 tommer (ca. 19.05 x 22.35 x 10.41 cm) |
| Fabrikant | Datalogik |
| Global Trade Identification Number (GTIN) | 05054629213858 |
Garanti og support
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic webwebsted.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
Online ressourcer: For the most up-to-date documentation, drivers, and software, please visit the Datalogic Official Webwebsted.
