1. Introduktion
Thank you for choosing the Deca Parva 145E Welding Machine. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your new welding equipment. Please read this manual thoroughly before using the machine and keep it for future reference.
The Deca Parva 145E is designed for various welding tasks, offering reliable performance for both hobbyists and professionals. Proper understanding and adherence to these instructions will ensure optimal results and prolong the life of your machine.
2. Sikkerhedsinstruktioner
ADVARSEL: Svejsning kan være farligt. Følg altid sikkerhedsforanstaltningerne for at forhindre alvorlig personskade eller død.
- Elektrisk stød: Welding current can cause fatal electric shock. Ensure proper grounding. Do not touch live electrical parts. Wear dry, insulated gloves.
- Røg og gasser: Welding fumes and gases can be hazardous to your health. Work in a well-ventilated area. Use a fume extractor if necessary.
- Bue stråler: Lysbuestråler kan brænde øjne og hud. Brug en svejsehjelm med passende skyggefilter og beskyttelsestøj.
- Brand og eksplosion: Welding sparks and hot metal can cause fire or explosions. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Forbrændinger: Hot metal and slag can cause severe burns. Wear protective gloves and clothing.
- Pace Makers: Persons with pacemakers should consult their doctor before operating this equipment.
- Afbryd altid strømmen, før du udfører vedligeholdelse eller service.
3. Pakkens indhold
Pak forsigtigt kassen ud, og sørg for, at alle dele er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, skal du straks kontakte din forhandler.
- Deca Parva 145E Welding Machine
- Elektrodeholder med kabel
- Jord Clamp med kabel
- Welding Mask (Handheld)
- Chipping Hammer / Wire Brush
- Instruktionsmanual
4. Produktet er slutview
The Deca Parva 145E is a compact and robust welding machine designed for various arc welding applications. Below is an image illustrating the main unit and its included accessories.
Figur 1: Deca Parva 145E Welding Machine and included accessories. The image displays the yellow main welding unit, a black handheld welding mask, a black chipping hammer with a wire brush, an electrode holder, and a ground clamp.
Nøglekomponenter:
- Hovedenhed: Gul casing with control panel.
- Afbryderen: On/Off kontrol.
- Strømjusteringsknap: For stepless welding current regulation.
- Thermal Protection Indicator: Illuminates when the machine overheats.
- Udgangsterminaler: Connections for electrode holder and ground clamp.
- Elektrodeholder: Secures the welding electrode.
- Jord Clamp: Connects to the workpiece to complete the electrical circuit.
- Welding Mask: Provides eye and face protection from arc rays and sparks.
- Chipping Hammer/Wire Brush: Used for removing slag and cleaning welds.
5. Opsætning
- Placering: Place the welding machine on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure adequate space around the machine for air circulation.
- Strømtilslutning: Connect the machine's power cord to a suitable grounded electrical outlet. Ensure the power supply matches the machine's requirements (refer to specifications).
- Tilslut jordforbindelseamp: Fastgør jorden clamp cable to the appropriate output terminal on the welding machine. Securely attach the ground clamp til emnet eller svejsebordet, og sørg for god elektrisk kontakt.
- Tilslut elektrodeholder: Attach the electrode holder cable to the other output terminal on the welding machine. Insert a suitable electrode into the electrode holder. The recommended electrode size for this machine is 1.6mm to 3.2mm.
- Personligt beskyttelsesudstyr (PPE): Before turning on the machine, ensure you are wearing all necessary PPE, including a welding helmet, welding gloves, and protective clothing.
6. Betjeningsvejledning
- Tænd: Switch the main power switch to the "ON" position.
- Indstil svejsestrøm: Adjust the current adjustment knob to the desired welding current. The appropriate current setting depends on the electrode diameter and the material thickness being welded. Start with a lower setting and increase as needed.
- Forbered emnet: Ensure the workpiece is clean and free of rust, paint, or grease to ensure a good weld.
- Slå en bue: While wearing your welding helmet, gently tap or scratch the electrode against the workpiece to strike an arc. Once the arc is established, maintain a consistent arc length and travel speed.
- Svejsning: Move the electrode along the joint, maintaining a steady hand and angle. Observe the weld pool and adjust your technique as necessary.
- Termisk beskyttelse: If the thermal protection indicator illuminates, the machine has overheated. Turn off the machine and allow it to cool down before resuming operation. Do not bypass this safety feature.
- Finish Welding: When finished, lift the electrode from the workpiece to break the arc. Turn off the welding machine.
- Post-Weld Cleaning: Use the chipping hammer to remove slag from the weld bead, then use the wire brush to clean the weld.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din svejsemaskines lange levetid og sikker drift.
- Rensning: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
- Kabelinspektion: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damage. Replace damaged cables immediately.
- Terminalforbindelser: Ensure all terminal connections are tight and free of corrosion.
- Opbevaring: Store the welding machine in a dry, clean environment, away from moisture and extreme temperatures.
- Electrode Holder and Ground Clamp: Keep these accessories clean and in good working condition. Replace if damaged.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm til maskinen. | Power cord unplugged, faulty outlet, tripped circuit breaker. | Check power connection, test outlet, reset circuit breaker. |
| Machine turns on but no arc. | Poor ground connection, incorrect current setting, faulty electrode holder/cable, wet electrode. | Sørg for jordrensningamp is securely attached to clean metal. Adjust current. Inspect cables and holder. Use dry electrodes. |
| Thermal protection light is on. | Machine overheated due to prolonged use or insufficient ventilation. | Turn off the machine and allow it to cool down. Ensure proper ventilation. Reduce duty cycle. |
| Poor weld quality (e.g., porosity, lack of penetration). | Incorrect current, improper arc length, wrong electrode, dirty workpiece, incorrect travel speed. | Adjust current, maintain proper arc length, use correct electrode for material, clean workpiece, adjust travel speed. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.
9. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Deca |
| Modelnavn | Parva 145E |
| Varenummer | 0400193 |
| Varemodelnummer | 322006 |
| Svejsestrøm | Trinløs justering |
| Electrode Diameter Range | 1.6 mm - 3.2 mm |
| Strømkildetype | Elektrisk (AC) |
| Produktdimensioner | 390 x 210 x 280 mm (from description) / 24.99 x 16.99 x 29.49 cm (from specifications) |
| Varens vægt | 14.5 kg (from description) / 14.3 kg (from specifications) |
| Fabrikant | DECA |
| Dato først tilgængelig | 17. september 2015 |
Bemærk: Specifikationerne kan ændres uden varsel med henblik på produktforbedring.
10. Garanti og support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Deca products are manufactured to high-quality standards, and support is available for any operational issues or technical inquiries.
If you require technical assistance or have questions regarding your Deca Parva 145E Welding Machine, please contact the authorized Deca service center or your point of purchase. When contacting support, please have your model number (0400193 / 322006) and purchase date available.
