Amazon Basics Ni-MH AA/AAA Battery Charger with USB Output

Indledning

Tak for købetasing the Amazon Basics Ni-MH AA/AAA Battery Charger with USB Output. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new charger. Please read this manual thoroughly before use and retain it for future reference.

Sikkerhedsoplysninger

• Use only with Ni-MH AA/AAA rechargeable batteries. Do not attempt to charge other battery types (e.g., alkaline, Ni-Cd, Li-ion) as this may cause explosion, rupture, or leakage, leading to personal injury or property damage.
• Do not charge 1 or 3 batteries. This charger is designed to charge batteries in pairs (2 or 4 batteries simultaneously).
• Ensure correct battery polarity (+/-) when inserting batteries. Insert the negative (-) terminal first, then gently press down the positive (+) terminal to secure the battery and protect the contacts.
• Do not expose the charger to rain or moisture. Use indoors only.
• Opladeren må ikke skilles ad, ændres eller repareres. Overlad al service til kvalificeret personale.
• Opbevares utilgængeligt for børn.
• Tag opladeren ud af stikkontakten, når den ikke er i brug, eller før rengøring.
• Avoid charging batteries in extreme temperatures or direct sunlight.

Produkt overview

The Amazon Basics Ni-MH AA/AAA Battery Charger is designed for efficient and safe charging of your rechargeable batteries. It features multiple charging slots and a convenient USB output port.

Komponenter

• Battery Charging Slots (for AA/AAA Ni-MH batteries)
• USB Output Port (for charging USB-powered devices)
• Power Plug (EU standard)
• LED Indicators (for charging status)

Funktioner

• 4-hour Ni-MH battery charger with USB port.
• Charges 2 or 4 AA/AAA Ni-MH rechargeable batteries simultaneously.
• Reverse polarity and overcharge protection for safe charging.
• Built-in switching power technology for worldwide use (100-240V AC input).

Figur 1: Forside view of the Amazon Basics Ni-MH AA/AAA Battery Charger.

Figur 2: Tilbage view of the charger showing product label and EU plug.

Figure 3: Close-up of the USB output port located on the side of the charger.

Opsætning

1. Pak opladeren ud: Tag forsigtigt opladeren ud af emballagen.
2. Undersøg for skader: Kontrollér opladeren for synlige skader. Må ikke anvendes, hvis den er beskadiget.
3. Forbered batterier: Ensure the Ni-MH AA/AAA batteries you intend to charge are clean and free from corrosion.

Betjeningsvejledning

Opladning af batterier

1. Indsæt batterier:
   • Insert 2 or 4 AA/AAA Ni-MH rechargeable batteries into the charging slots.
   • Vigtig: When inserting batteries, always insert the negative (-) terminal first, then gently press down the positive (+) terminal to secure the battery and protect the contacts.
   • If charging only 2 batteries, place them side-by-side in two adjacent slots (e.g., the two leftmost slots or the two rightmost slots). The charger cannot charge 1 or 3 batteries.
2. Tilslut til strøm: Plug the charger directly into a standard 100-240V AC wall outlet.
3. Skærmopladning: The LED indicators will illuminate to show the charging status. Refer to the charger's specific LED behavior (e.g., red for charging, green for fully charged).
4. Fjern batterier: Once charging is complete (indicated by the LEDs), unplug the charger from the wall outlet and remove the batteries.

Figure 4: Charger with AA batteries correctly inserted for charging.

Figure 5: Charger with AAA batteries correctly inserted for charging.

Brug af USB-udgangsporten

The charger features a USB output port that can be used to charge USB-powered devices (e.g., smartphones, tablets). This port provides 5.0V at 0.5A output.

1. Connect Charger to Power: Plug the battery charger into a standard 100-240V AC wall outlet.
2. Tilslut USB-enhed: Connect your USB-powered device to the USB output port on the charger using a compatible USB cable.
3. Opladning: Your device will begin charging. Note that charging batteries and using the USB output simultaneously might affect charging speeds.

Figure 6: Charger plugged into a wall outlet with a USB cable connected to the USB output port.

Opretholdelse

• Rensning: Unplug the charger before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
• Opbevaring: Opbevar opladeren et køligt, tørt sted væk fra direkte sollys og fugt, når den ikke er i brug.
• Batterikontakter: Periodically check the battery contacts in the charging slots for dust or debris and clean if necessary to ensure proper connection.

Fejlfinding

Specifikationer

Figure 7: Dimensions of the Amazon Basics Battery Charger.

Garanti og support

For warranty information and customer support, please refer to the Amazon Basics official webwebstedet eller kontakt Amazons kundeservice direkte. Gem din købskvittering til garantikrav.

For yderligere hjælp, besøg: Amazon kundeservice