1. Introduktion
This manual provides essential information for the safe and efficient operation of your Mastervolt ChargeMaster Plus 12/35-3 Battery Charger. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage to the unit or connected systems.
The Mastervolt ChargeMaster Plus 12/35-3 is an advanced automatic battery charger designed for marine and automotive applications, providing optimal charging for various battery types.
2. Sikkerhedsoplysninger
ADVARSEL: Manglende overholdelse af disse sikkerhedsinstruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.
- Always disconnect power before installing or servicing the charger.
- Sørg for korrekt ventilation omkring opladeren for at forhindre overophedning.
- Do not expose the charger to rain, spray, or excessive moisture.
- This device is designed for indoor use in a protected environment.
- Kun kvalificeret personale bør udføre installation og vedligeholdelse.
- Brug ikke opladeren, hvis den er blevet beskadiget på nogen måde.
- Keep flammable materials away from the charger.
For detailed safety guidelines, refer to local electrical codes and marine standards.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Mastervolt ChargeMaster Plus 12/35-3 Battery Charger Unit
- Monteringsudstyr (skruer, skiver)
- Brugervejledning (dette dokument)
- Garantikort
4. Opsætning og installation
4.1 Montering af opladeren
The ChargeMaster Plus 12/35-3 should be mounted in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for airflow.
- Select a suitable mounting location that can support the weight of the charger.
- Use the provided mounting template (if applicable) or measure the mounting holes on the back of the unit.
- Secure the charger firmly to a solid surface using appropriate screws and fasteners.
Figur 1: Bagside view of the Mastervolt ChargeMaster Plus 12/35-3, illustrating the integrated mounting brackets for secure installation.
4.2 Elektriske forbindelser
All electrical connections must comply with local regulations and standards. Consult a qualified electrician if unsure.
- Connect the AC input cable to a grounded power source.
- Connect the DC output cables to your battery bank(s). Ensure correct polarity (positive to positive, negative to negative). The ChargeMaster Plus 12/35-3 supports multiple battery banks.
- Verify all connections are secure and free from corrosion.
Figur 2: Forside view of the Mastervolt ChargeMaster Plus 12/35-3, showing the control panel and connection points.
Figur 3: Vinklet top view of the Mastervolt ChargeMaster Plus 12/35-3, highlighting the ventilation grilles and overall compact design.
5. Betjeningsvejledning
5.1 Tænd/sluk
Once all connections are made, connect the charger to the AC power source. The charger will automatically initiate its startup sequence.
- To power on: Ensure AC power is supplied. The power indicator light will illuminate.
- To power off: Disconnect the AC power source.
5.2 Opladningsproces
The ChargeMaster Plus 12/35-3 features an intelligent 3-stage+ charging process to optimize battery life and performance:
- Bulk Stage: Delivers maximum current to rapidly charge the battery to approximately 80%.
- Absorption Stage: Charges the battery to 100% at a constant voltage, gradually reducing current.
- Float Stage: Holder batteriet fuldt opladet med et lavt, konstant volumtage.g. forhindrer overopladning.
- Vedligeholdelse Stage: Periodically checks battery voltage and initiates a new charging cycle if needed.
The charger automatically detects the battery type and condition to apply the most suitable charging profile. Refer to the display indicators for charging status.
6. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your Mastervolt ChargeMaster Plus 12/35-3.
- Rensning: Periodically wipe the exterior of the charger with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ventilation: Ensure that the ventilation openings are clear of dust and debris. Blocked vents can lead to overheating.
- Forbindelser: Annually inspect all electrical connections for tightness and signs of corrosion. Tighten any loose connections and clean corroded terminals.
- Miljø: Confirm the charger remains in a dry, protected environment.
CAUTION: Do not open the charger casing. Der er ingen dele indeni, som kan serviceres af brugeren.
7. Fejlfinding
This section addresses common issues you might encounter with your charger. For problems not listed here, contact Mastervolt support.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Opladeren tænder ikke | No AC input power; Blown fuse; Faulty connection. | Check AC power source and circuit breaker. Inspect input cable and connections. |
| Batteriet oplades ikke | Incorrect battery connection; Battery deeply discharged; Faulty battery. | Verify DC output connections and polarity. Allow time for deeply discharged batteries to recover. Test battery condition. |
| Overheating / Shutdown | Utilstrækkelig ventilation; Overbelastning. | Ensure clear airflow around the unit. Reduce load if possible. Allow unit to cool down. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Mastervolt |
| Modelnavn | ChargeMaster Plus 12/35-3 (Model Number: 44010250) |
| Nominel Output Voltage | 12 Volts DC (Requires AC input power, not specified in data) |
| Maks. Udgangsstrøm | 25 Amps |
| Varens vægt | 5.5 pund (ca. 2.5 kg) |
| Emnedimensioner (LxBxH) | 5.2 x 2.36 x 9.21 tommer (ca. 13.2 x 6 x 23.4 cm) |
| Materiale | Plast |
| Farve | No Color (referring to the product's primary color, which is teal/green) |
| Første ledige dato | 14. februar 2015 |
9. Garanti og support
The Mastervolt ChargeMaster Plus 12/35-3 comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Mastervolt webwebsted.
For technical support, service, or spare parts, please contact Mastervolt customer service or your authorized dealer. Have your product model number (44010250) and serial number ready when contacting support.
Mastervolt Support: www.mastervolt.com/support
