Einhell GE-HC 18 Li T Kit Power X-Change User Manual

Indledning

The Einhell GE-HC 18 Li T Kit is a versatile, cordless multi-functional tool designed for maintaining high branches and hedges. This kit includes both a hedge trimmer and a lopper (chainsaw) attachment, powered by the Einhell Power X-Change 18 V lithium-ion battery system. Its extendable telescopic handle and adjustable heads allow for comfortable and precise work from the ground.

Image: The Einhell GE-HC 18 Li T Kit, showcasing its extendable pole, hedge trimmer attachment, lopper (chainsaw) attachment, battery, and charger.

Sikkerhedsoplysninger

Læs og forstå altid alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Manglende overholdelse af alle nedenstående instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

• Wear appropriate personal protective equipment (PPE) including eye protection, gloves, and sturdy footwear.
• Hold børn og omkringstående væk, mens du betjener værktøjet.
• Sørg for, at arbejdsområdet er frit for forhindringer og godt oplyst.
• Brug ikke værktøjet i våde omgivelser eller i nærheden af ​​brandfarlige væsker eller gasser.
• Fjern altid batteripakken, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.
• Hold et fast greb om værktøjet med begge hænder under drift.
• Be aware of falling debris when cutting overhead.

Pakkens indhold

The Einhell GE-HC 18 Li T Kit typically includes the following components:

• 1 x Power X-Change GE-HC 18 Li Multi-functional Tool
• 1 x OREGON Blade (for lopper attachment)
• 1 x OREGON Chainsaw Chain (for lopper attachment)
• 1 x Power X-Change 3.0 Ah Battery
• 1 x Power X-Change hurtigoplader
• 1 x Steel Blade (for hedge trimmer attachment)
• 1 x Additional Handle

Opsætning

Installation og opladning af batteri

The GE-HC 18 Li T Kit utilizes the Einhell Power X-Change battery system, allowing the battery to be used with other compatible tools. The kit includes a 3.0 Ah battery and a high-speed charger.

Image: The Einhell Power X-Change battery system, illustrating its compatibility across a wide range of Einhell tools.

Image: The included 3.0 Ah Power X-Change battery and its fast charger. The battery features a charge level indicator with three LEDs.

1. To charge the battery, connect the charger to a power outlet and insert the battery pack into the charger. The charger's indicator lights will show the charging status.
2. Once fully charged (typically within 1 hour with the fast charger), remove the battery from the charger.
3. To install the battery into the tool, align the battery with the battery slot on the tool's handle and slide it in until it clicks securely into place.
4. For at fjerne batteriet skal du trykke på udløserknappen(e) på batteripakken og skubbe den ud.

Attaching the Hedge Trimmer/Lopper Head

The tool is designed for easy interchangeability between the hedge trimmer and lopper attachments.

Image: Diagram illustrating the key components: lopper with tool-less chain change, motor head (7-way tiltable, 90° rotatable attachment), aluminum telescopic pole (88-182 cm adjustable), multifunctional attachments (45 cm hedge trimmer, 20 cm chainsaw), and 4-way adjustable handle.

1. Ensure the battery is removed before attaching or detaching any heads.
2. Align the desired attachment (hedge trimmer or lopper) with the connection point on the telescopic pole.
3. Push and twist or secure the attachment according to the locking mechanism until it is firmly seated and locked. Refer to the specific locking mechanism on your tool for precise instructions.

Justering af teleskophåndtaget

The aluminum telescopic handle is continuously adjustable to suit various working heights.

Image: Close-up of the continuously adjustable aluminum telescopic pole, which extends from 88 cm to 182 cm.

Image: Detail showing the telescopic extension mechanism, indicating an additional 94 cm of reach.

1. Loosen the quick-release fasteners on the telescopic pole.
2. Extend or retract the pole to the desired length (880 mm to 1820 mm).
3. Securely tighten the quick-release fasteners to lock the pole in position.

Adjusting the Main Handle and Additional Handle

Both the main handle and the additional handle are adjustable for optimal comfort and control.

Image: The main handle, which is 4-way adjustable for working from various angles.

Image: The adjustable additional handle, featuring a quick fastener for easy positioning.

1. The main handle can be tilted in four settings to adapt to different working positions. Adjust by pressing the release mechanism and setting to the desired angle.
2. The additional hand-grip is also adjustable and can be adapted to any user due to its practical quick lock. Loosen the quick lock, slide the handle to the desired position, and tighten the quick lock.

Betjeningsvejledning

Generel drift

Once the battery is installed and the desired attachment is secured, the tool is ready for use. To start the tool, engage the safety switch and press the trigger. Release the trigger to stop the tool.

Brug af hækkeklipperen

The hedge trimmer attachment is ideal for shaping hedges and shrubs. The blades are made of laser-cut and diamond-ground steel for efficient cutting.

Image: Close-up of the 90-degree rotatable attachment, designed for effortless horizontal cuts.

• The motor head can be tilted by seven settings, and the main grip by four settings, allowing adjustment to various working situations, including difficult high-reach cuts.
• The top rotates 90 degrees, enabling effortless horizontal cuts without straining.
• Always maintain a safe distance from the cutting blades.

Using the Lopper (Chainsaw)

The lopper attachment is designed for cutting thicker branches. It features an Oregon quality blade and chain.

• The automatic chain lubrication system ensures the Oregon chain remains lubricated from the oil container during operation. Regularly check the oil level.
• Chain tension can be adjusted and changed easily without tools. Refer to the tool's specific instructions for tool-less chain tensioning and changing.
• A chain catch bolt is integrated to prevent the chain from slipping from the blade during use.
• The claw stop prevents slipping while working with the lopper, providing better control.

Batteridriftstid

The battery runtime varies depending on the battery capacity and the attachment used.

Max. Runtime per Battery Charge (Hedge Trimmer)

Batterikapacitet	Ca. Runtime
2.5 Ah	35 min
3.0 Ah	40 min
4.0 Ah	60 min
5.2 Ah	75 min
6.0 Ah	80 min
8.0 Ah	120 min

Max. Runtime per Battery Charge (Chainsaw)

Batterikapacitet	Ca. Runtime
2.5 Ah	48 min
3.0 Ah	60 min
4.0 Ah	75 min
5.2 Ah	100 min
6.0 Ah	120 min
8.0 Ah	150 min

Opretholdelse

Blade and Chain Care

• Hækkeklipperklinger: After each use, clean the blades of sap and debris. Apply a light coat of machine oil to prevent rust and ensure smooth operation.
• Lopper Chain: Ensure the oil tank for automatic chain lubrication is filled before each use. Regularly check chain tension and adjust as needed. Sharpen the chain when it becomes dull, or replace it if damaged.
• Always remove the battery before performing any maintenance or cleaning.

Rengøring og opbevaring

• Clean the tool's housing with a damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevar værktøjet et tørt og sikkert sted, utilgængeligt for børn.
• The sturdy cutter guard should be used for safe storage and transportation of the hedge trimmer attachment.

Fejlfinding

Specifikationer

Garanti og support

Einhell products are manufactured to high quality standards and are subject to strict quality controls. For information regarding warranty terms, service, or technical support, please refer to the documentation provided with your purchase or visit the official Einhell webwebsted. Gem din købsbevis i tilfælde af garantikrav.