1. Vigtige sikkerhedsoplysninger
Please read and understand all instructions before attempting to assemble, install, or operate this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.
- ADVARSEL: Risk of electric shock. Disconnect power at the main circuit breaker or fuse box before installation or any maintenance.
- Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
- Sørg for, at alle elektriske tilslutninger er udført i overensstemmelse med lokale forskrifter, forordninger og National Electric Code (NEC).
- Do not attempt to alter the fixture or its components.
- Handle the fixture with care to avoid damage to the LED components or glass shades.
2. Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede, før installationen påbegyndes. Hvis der mangler eller er beskadigede dele, må installationen ikke fortsættes, men der skal kontaktes kundesupport.
- Pendant Fixture Assembly (9-light LED pendant)
- Mounting Hardware Kit (crossbar, mounting screws, wire nuts)
- Instruktionsmanual (dette dokument)
3. Opsætning og installation
3.1 Nødvendigt værktøj (medfølger ikke)
- Phillips hovedskruetrækker
- Flad skruetrækker
- Trådstrippere
- Elektrisk tape
- Stige
- Sikkerhedsbriller
3.2 Installationstrin
- Sluk for strømmen: Før du starter, skal du sørge for, at strømmen til samledåsen er slukket ved afbryderen.
- Forbered montering: Fastgør monteringstværstangen til samledåsen med de medfølgende skruer. Sørg for, at den er forsvarligt fastgjort.
- Juster vedhængets højde: The individual pendants can be adjusted to your desired hanging height. Carefully feed the suspension wires through the canopy until the desired length is achieved for each light. Secure the wires according to the specific mechanism on the fixture.
- Ledningsforbindelser: Connect the fixture's wires to the corresponding wires from the junction box. Use the provided wire nuts.
- Tilslut den sorte ledning fra armaturet til den sorte (varme) ledning fra samledåsen.
- Tilslut den hvide ledning fra armaturet til den hvide (neutrale) ledning fra samledåsen.
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box (or to the mounting crossbar if no ground wire is present).
- Mount Canopy: Carefully tuck all wires into the junction box. Align the fixture canopy with the mounting crossbar and secure it with the canopy screws.
- Gendan strøm: Once the fixture is securely mounted, restore power at the circuit breaker.
Image 3.2.1: Fully assembled ET2 Hilite Large Pendant (Model E21169-01BZ) showing the overall design and multiple lights.
Image 3.2.2: Dimensional drawing of the ET2 Hilite Large Pendant, indicating overall height and width for installation planning.
4. Betjeningsvejledning
The ET2 Hilite Large Pendant is designed for simple operation via a standard wall switch.
- Tænd/sluk: Use the wall switch connected to the fixture's circuit to turn the pendant lights on or off.
- LED-teknologi: This fixture utilizes integrated LED technology for energy efficiency and long lifespan. No traditional bulbs need to be replaced.
- App kontrol: While the fixture itself does not have integrated app control, it is compatible with most standard smart home lighting systems and dimmer switches that support LED fixtures. Consult your smart home system's instructions for integration.
5. Vedligeholdelse
Proper care and maintenance will ensure the longevity and appearance of your pendant light.
- Rensning: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
- Ingen dele, der kan serviceres af brugeren: The LED components are integrated and not designed for user replacement. Do not attempt to disassemble the LED modules.
- Inspektion: Kontrollér regelmæssigt alle forbindelser og monteringsbeslag for tæthed.
6. Fejlfinding
Hvis du oplever problemer med din pendellampe, kan du se følgende almindelige fejlfindingstrin:
- Lyset tændes ikke:
- Kontroller, at strømmen er tændt ved afbryderen.
- Sørg for, at vægkontakten er i 'ON'-positionen.
- Verify that all wiring connections are secure (ensure power is off before checking).
- Lysflimmer:
- Ensure all wiring connections are secure. Loose connections can cause flickering.
- If using a dimmer switch, ensure it is compatible with LED lighting. Incompatible dimmers can cause flickering or damage to the LEDs.
- Dæmpet lysudgang:
- If using a dimmer, ensure it is set to the maximum brightness.
- Verify the fixture is receiving the correct voltage (120V).
If these steps do not resolve the issue, contact a qualified electrician or ET2 customer support.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | ET2 |
| Modelnummer | E21169-01BZ |
| Farve | Bronze |
| Materiale | Metal (armatur), Glas (skærm) |
| Stil | Moderne |
| Lysarmatur Form | Vedhæng |
| Produktdimensioner | 23.5 cm L x 23.5 cm B x 5.75 cm H |
| Strømkilde | Elektrisk med ledning |
| Antal lyskilder | 9 |
| Voltage | 120 volt |
| Wattage (I alt) | 64.8 Watts (9 lights x 7.2W each) |
| Monteringstype | Loftmontering |
| Montering påkrævet | Ja |
| Varens vægt | 15.84 pund |
8. Garanti og support
8.1 Garantioplysninger
This ET2 Hilite Large Pendant (Model E21169-01BZ) is covered by a 1 års producentgaranti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader som følge af forkert installation, ulykker, misbrug, misbrug eller uautoriserede ændringer.
8.2 Kundesupport
For technical assistance, warranty claims, or to report missing/damaged parts, please contact ET2 customer support. Refer to the original packaging or the ET2 official webhjemmeside for aktuelle kontaktoplysninger.
