Indledning
The Progress Lighting Helm Collection One-Light 11" LED Flush Mount fixture is a contemporary lighting solution designed for both ceiling and wall mounting. Featuring an acrylic diffuser with architectural details, this fixture provides efficient and stylish illumination. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new light fixture.
Vigtige sikkerhedsoplysninger
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.
- Afbryd altid strømmen ved hovedafbryderen før installation eller vedligeholdelse.
- Installer ikke denne lampe i våde omgivelser. Den er kun beregnet til indendørs brug.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede.
- This fixture is designed for 120 Volts AC.
- Forsøg ikke at ændre armaturet. Enhver ændring kan ugyldiggøre garantien og skabe en sikkerhedsrisiko.
- LED-lyskilden er integreret og kan ikke udskiftes af brugeren.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Helm Collection LED Flush Mount Fixture (1)
- Monteringshardwaresæt (1)
- Installationsark (1)
Opsætning og installation
Follow these steps carefully to install your new fixture. It is recommended to have two people for installation.
Trin 1: Forbered dig til installation
- Sluk for strømmen ved afbryderen eller sikringsskabet for at undgå elektrisk stød.
- Remove the old fixture (if applicable) and disconnect all wiring.
- Unpack the new fixture and its components. Keep all parts organized.
Trin 2: Monter armaturet
Billede: Forside view of the 11-inch LED flush mount fixture in a brushed nickel finish, showcasing its square design and acrylic diffuser.
Image: Diagram showing the dimensions of the fixture, indicating an 11-inch width and 3-3/4 inch height.
- Fastgør monteringsbeslaget til samledåsen med de medfølgende skruer. Sørg for, at det er sikkert fastgjort.
- Connect the fixture's wires to the corresponding house wires:
- Tilslut den sorte ledning (fase) fra armaturet til den sorte ledning fra samledåsen.
- Tilslut den hvide ledning (neutral) fra armaturet til den hvide ledning fra samledåsen.
- Connect the green or bare copper wire (Ground) from the fixture to the green or bare copper wire from the junction box.
- Stik forsigtigt alle ledninger ind i samledåsen.
- Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling or wall.
Trin 3: Afslut installationen
- Genopret strømmen ved hovedafbryderen.
- Test armaturet for at sikre, at det fungerer korrekt.
Betjeningsvejledning
This LED flush mount fixture is designed for simple operation.
- Tænd/sluk: Use a standard wall switch connected to the fixture's circuit to turn the light on or off.
- Dæmpning: This fixture is compatible with most standard dimmer switches. For optimal performance and to avoid flickering, use an LED-compatible dimmer switch. Consult your dimmer switch manufacturer's instructions for proper installation and operation.
Opretholdelse
For at sikre din lampes levetid og udseende, skal du følge disse vedligeholdelsesretningslinjer:
- Rensning: Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic diffuser.
- LED lyskilde: The LED light source in this fixture is integrated and designed for long-term use. It is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced.
- Inspektion: Periodically inspect the fixture for any loose connections or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.
Fejlfinding
Hvis du oplever problemer med dit armatur, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Armaturet lyser ikke. | Ingen strøm til armaturet. Løs ledningsforbindelse. Defekt vægafbryder. | Tjek afbryder eller sikring. Sluk for strømmen, kontroller alle ledningsforbindelser. Test eller udskift vægkontakten. |
| Lyset flimrer eller dæmpes ujævnt. | Inkompatibel lysdæmper. Løse ledninger. | Ensure an LED-compatible dimmer is used. Replace if necessary. Sluk for strømmen, kontroller alle ledningsforbindelser. |
| Summende lyd fra armaturet. | Inkompatibel lysdæmper. | Replace with an LED-compatible dimmer switch. |
If the problem persists after trying these solutions, contact Progress Lighting customer support or a qualified electrician.
Specifikationer
| Attribut | Detalje |
|---|---|
| Mærke | Fremskridtsbelysning |
| Modelnavn | Hjelm LED |
| Modelnummer | P3447-0930K9 |
| Farve | Nikkel |
| Materiale | Legeret stål, Glas (skærm) |
| Stil | Nutidige |
| Lysarmatur Form | Loft |
| Indendørs/Udendørs brug | Indendørs |
| Strømkilde | Elektrisk med ledning |
| Installationstype | Flush Mount |
| Lyskildetype | LED |
| Finish Type | Børstet |
| Antal lyskilder | 1 (Integreret LED) |
| Voltage | 120 volt |
| Lys farvetemperatur | 3000 Kelvin (varm hvid) |
| Wattage | 17 watt |
| Lysstyrke | 1211 lumen |
| Effektivitet | 71.2 lumen/watt |
| Varens vægt | 2.82 pund |
| Dimensioner | 11 inches (Diameter/Width) |
| UPC | 785247188895 |
| Energieffektivitet | Energy Star-certificeret |
Garanti og support
Denne Progress Lighting-armatur leveres med en 5 års begrænset garantiDenne garanti garanterer din fulde tilfredshed med dit køb og inkluderer professionel kundeservice efter salget.
For warranty claims, technical assistance, or any questions regarding your product, please contact Progress Lighting customer service.
Du kan også besøge embedsmanden Progress Lighting-butik på Amazon for mere information og produkttilbud.
