Progress Lighting P6071-31 Udendørs væglanterne Brugsanvisning

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting P6071-31 outdoor wall lantern. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

For your safety, always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

Sikkerhedsoplysninger

ADVARSEL: Always turn off power at the main circuit breaker before installing, cleaning, or servicing this fixture. Failure to do so may result in serious injury or death.

FORSIGTIGHED: Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.

VIGTIG: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire's insulation, do not attempt installation. Contact customer service.

This fixture is designed for outdoor use and is suitable for wet locations. Ensure all connections are properly sealed to prevent water intrusion.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes.

Light Fixture Assembly
Mounting Hardware Kit (screws, wire nuts, mounting strap)
Installationsvejledning

Diagram showing all components included in the package for the outdoor wall lantern.

Figur 1: Eksploderet view of the P6071-31 outdoor wall lantern components.

Specifikationer

Attribut	Værdi
Mærke	Fremskridtsbelysning
Model	P6071-31
Farve	Sort
Materiale	Aluminium
Stil	Traditionel
Lysarmatur Form	Væg
Dimensioner (ca.)	Height: 9-1/8", Width: 5-1/2", Depth from wall: 6-1/2"
Pære type	Incandescent, 100W Medium Base (Max)
Voltage	120V
Placeringsvurdering	cCSAus Wet location listed

Dimensional drawing of the Progress Lighting P6071-31 outdoor wall lantern showing height, width, and depth measurements.

Figure 2: Product dimensions for the P6071-31 fixture.

Opsætning og installation

Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed for wall mounting over a standard 4" hexagonal recessed outlet box.

Forbered monteringsstroppen: Attach the mounting strap to the outlet box using the provided mounting screws. Ensure the strap is securely fastened.
Foretag elektriske forbindelser:
- Connect the bare copper or green ground wire from the fixture to the green ground screw on the mounting strap.
- Connect the white wire from the fixture to the white (neutral) supply wire using a wire nut.
- Connect the black wire from the fixture to the black (hot) supply wire using a wire nut.
- Stik forsigtigt alle ledninger ind i stikdåsen.
Monter armaturet: Align the fixture with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the wall and sealed to prevent water entry, especially in wet locations.
Installer pæren: Screw in a medium base incandescent bulb (max 100W) into the socket. Do not overtighten.
Gendan strøm: Tænd for strømmen igen ved hovedafbryderen.

Detailed diagram showing the electrical wiring connections and mounting steps for the outdoor wall lantern.

Figure 3: Installation diagram for the P6071-31 outdoor wall lantern.

Betjeningsvejledning

Once installed and power is restored, the fixture can be operated via the wall switch connected to the circuit. This fixture does not include a built-in switch or sensor.

Ensure the light bulb is securely screwed into the socket.
Use a standard wall switch to turn the light fixture on or off.
For optimal performance and longevity, use bulbs within the specified wattage rækkevidde.

Opretholdelse

Regular maintenance will help preserve the appearance and functionality of your outdoor wall lantern.

Rensning: To clean the fixture, turn off the power at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
Udskiftning af pære: Turn off the power at the circuit breaker and allow the bulb to cool before replacing. Unscrew the old bulb and screw in a new medium base incandescent bulb (max 100W). Do not exceed the maximum wattage.
Inspektion: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the seal around the mounting surface remains intact to prevent water intrusion.

Nærbillede view of the Progress Lighting P6071-31 outdoor wall lantern, highlighting the black finish and clear water glass panels.

Figure 4: The P6071-31 fixture, showing details of the finish and glass for cleaning reference.

Fejlfinding

Hvis du støder på problemer med dit armatur, kan du se følgende almindelige problemer og løsninger:

Problem	Mulig årsag	Løsning
Lyset tændes ikke.	Strømmen er afbrudt ved afbryderen. Løse ledningsforbindelser. Defekt pære. Defekt vægafbryder.	Check circuit breaker and ensure it is in the "ON" position. Turn off power, check all wire connections and tighten if necessary. Udskift pæren med en ny, fungerende. Consult a qualified electrician to check the switch.
Lyse flimrer.	Løs pære. Løse ledningsforbindelser. Forkert pæretype/watttage.	Spænd pæren i fatningen. Turn off power, check and tighten wire connections. Ensure bulb is correct type and wattage (maks. 100W glødelampe).
Armaturet brummer.	Løs montering. Inkompatibel lysdæmper (hvis relevant).	Ensure fixture is securely mounted to the outlet box. If using a dimmer, ensure it is compatible with incandescent loads.

Garanti og support

Dette produkt er omfattet af en 1 års begrænset garanti from the date of purchase. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your Progress Lighting P6071-31 fixture, please contact Progress Lighting customer service. Please have your model number (P6071-31) and proof of purchase ready when contacting support.

You can find more information and contact details on the official Progress Lighting webwebsted: www.progresslighting.com

	Progress Lighting 8715, 8718 Monterings- og monteringsvejledning Trin-for-trin-vejledning til montering og installation af Progress Lighting pendellamper, model 8715 og 8718, inklusive ledningsføringsinstruktioner og sikkerhedsadvarsler.
	Progress Lighting 7206EB monterings- og installationsvejledning Detaljeret monterings- og installationsvejledning til Progress Lighting 7206EB lysstofrørsarmatur til loftet, inklusive sikkerhedsadvarsler, identifikation af dele og trinvise instruktioner på engelsk, spansk og fransk.
	Installationsvejledning til Progress Lighting P560341/P560342/P560343 1-LT udendørs væglanterne Detaljerede installationsvejledninger og sikkerhedsoplysninger til Progress Lighting P560341, P560342 og P560343 udendørs væglanterne med 1 lyskilde. Indeholder pakkens indhold, liste over hardware, monteringstrin, plejeinstruktioner og garantioplysninger.
	Progress Lighting P400395 lysekrone med 6 lyskilder, monteringsvejledning Omfattende monterings- og installationsvejledning til Progress Lighting P400395 lysekrone med 6 lys. Indeholder pakkens indhold, hardwaredetaljer, sikkerhedsforanstaltninger og trinvise installationsprocedurer.
	Progress Lighting P500284-031 Atwell Pendellampe - Specifikationer og overview Oplev Progress Lighting P500284-031 Atwell pendellampen. Dette dokument indeholder specifikationer, funktioner og installationsdetaljer for denne iøjnefaldende lampe, der er ideel til entréer, køkkener og spisestuer.
	Progress Lighting Hartwick P710087-009 Væglampe i børstet nikkel Detaljerede specifikationer for Progress Lighting Hartwick P710087-009 væglampe med børstet nikkelfinish, ætset opalglas, ADA-overholdelse og egnethed til moderne interiører. Inkluderer dimensioner, elektriske detaljer og monteringsdetaljer.