1. Introduktion
The 3M GH1 Chin Strap is a replacement accessory designed for use with 3M PELTOR G22 and G3000 safety helmets. This durable, 2-point chin strap is intended for industrial and professional applications to ensure a secure fit of the helmet during work activities. It is not intended for private or domestic consumer use.
2. Sikkerhedsoplysninger
Always ensure that the chin strap is correctly installed and adjusted to provide a secure fit without causing discomfort. Regularly inspect the chin strap for any signs of wear, damage, or degradation. A damaged chin strap may compromise the helmet's stability and protective function. Replace the chin strap immediately if any damage is observed.
3. Pakkens indhold
The 3M GH1 Chin Strap package typically contains:
- 1 x 3M GH1 Chin Strap (2-point design)

Image: The 3M GH1 Chin Strap as supplied in its original packaging.
4. Opsætning og installation
Follow these steps to properly install the 3M GH1 Chin Strap onto your compatible 3M PELTOR G22 or G3000 safety helmet:
- Identify the attachment points on your 3M PELTOR G22 or G3000 helmet. These are typically small slots or clips located on the helmet's suspension system.
- Take one end of the 3M GH1 Chin Strap. The strap features a plastic end piece designed to fit into the helmet's attachment points.
- Insert the plastic end piece of the chin strap into the corresponding slot on one side of the helmet until it clicks securely into place.
- Repeat the process for the other end of the chin strap, attaching it to the opposite side of the helmet.
- Gently pull on both ends of the installed chin strap to ensure it is firmly secured and will not detach during use.

Image: The 3M GH1 Chin Strap showing its full length and attachment mechanisms.

Billede: Detaljeret view of the durable plastic attachment points on the chin strap.
5. Betjening
Once installed, the 3M GH1 Chin Strap can be adjusted for a comfortable and secure fit:
- Sæt hjelmen på hovedet.
- Bring the chin strap under your chin.
- Adjust the length of the strap using the buckle to achieve a snug fit that keeps the helmet stable without being overly tight or restrictive. The strap should be tight enough to prevent the helmet from falling off but loose enough to allow for comfortable movement and breathing.
6. Vedligeholdelse og pleje
To ensure the longevity and effectiveness of your 3M GH1 Chin Strap:
- Rensning: Clean the chin strap regularly with mild soap and water. Rinse thoroughly and allow it to air dry completely before reattaching it to the helmet or storing. Do not use harsh chemicals or abrasive cleaners.
- Inspektion: Before each use, inspect the strap for cuts, tears, fraying, or any damage to the stitching or plastic components. Check for signs of material degradation due to UV exposure or chemical contact.
- Opbevaring: Store the chin strap in a clean, dry place away from direct sunlight, extreme temperatures, and corrosive substances.
- Udskiftning: Replace the chin strap if it shows any signs of damage, wear, or if its ability to secure the helmet is compromised.
7. Fejlfinding
If you encounter issues with your 3M GH1 Chin Strap:
- Remmen føles for løs eller for stram: Adjust the buckle to find the optimal length for a secure yet comfortable fit.
- Strap detaches from helmet: Ensure the plastic end pieces are fully inserted and clicked into the helmet's attachment points. If the attachment points or strap ends are damaged, replace the chin strap.
- Signs of wear or damage: The chin strap is a safety accessory. If it shows any signs of wear, fraying, or damage, it must be replaced immediately to maintain helmet stability and user safety.
8. Specifikationer
| Produktnavn | 3M GH1 Chin Strap |
| Modelnummer | XH001650353 |
| Kompatible hjelme | 3M PELTOR G22, 3M PELTOR G3000 |
| Materiale | Durable fabric (Peltor) with plastic components |
| Lukketype | Spænde |
| Farve | Sort |
| Dimensioner (ca.) | 12.4 x 15 x 1 cm |
| Vægt (ca.) | 20 g |
| Global Trade Item Numbers (GTINs) | 04054596479272, 07318640000766 |
9. Garanti og support
For warranty information, technical support, or further assistance with your 3M GH1 Chin Strap, please contact 3M customer service or visit the official 3M website. Ensure you have your product model number (GH1 or XH001650353) available when seeking support.
10. Produktvideoer
Der blev ikke fundet nogen officielle produktvideoer fra sælgeren for dette produkt.