BLACK+DECKER 4-1/2-tommer 6.5-Amp Brugsanvisning til vinkelsliber (model BDEG400)

1. Introduktion

The BLACK+DECKER 4-1/2-Inch 6.5-Amp Angle Grinder (Model BDEG400) is a versatile power tool designed for various tasks including sharpening, cutting, grinding, rust removal, and surface preparation. This manual provides essential information for safe and effective use of your angle grinder.

Image 1: The BLACK+DECKER BDEG400 Angle Grinder.

2. Generelle sikkerhedsoplysninger

Always follow basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operating this tool.

2.1. Personlig sikkerhed

• Brug passende personlige værnemidler (PPE): Always wear safety goggles or safety glasses with side shields, a dust mask, hearing protection, and heavy-duty gloves.
• Klæd dig ordentligt på: Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Vær opmærksom: Watch what you are doing and use common sense. Do not use the tool while tired or under the influence of drugs, alcohol, or medication.

2.2. Elektrisk sikkerhed

• Undgå kropskontakt med jordforbundne overflader: F.eksamprør, radiatorer, komfurer og køleskabe. Der er en øget risiko for elektrisk stød, hvis din krop er jordforbundet.
• Do not expose power tools to rain or wet conditions: Vand, der trænger ind i et elværktøj, øger risikoen for elektrisk stød.
• Misbrug ikke ledningen: Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts.

2.3. Arbejdsområdesikkerhed

• Hold arbejdsområdet rent og godt oplyst: Rodede eller mørke områder inviterer til ulykker.
• Do not operate power tools in explosive atmospheres: Såsom i nærværelse af brændbare væsker, gasser eller støv. Elværktøj danner gnister, som kan antænde støv eller dampe.
• Hold børn og tilskuere væk: Distraktioner kan få dig til at miste kontrollen.

3. Produktkomponenter

Familiarize yourself with the main parts of your BLACK+DECKER Angle Grinder:

Image 2: Key features of the angle grinder including the 3-Position Side Handle, One-Touch Release Switch, and Spindle Lock.

• 3-positions sidehåndtag: Provides adjustable comfort and control for various applications and angles.
• One-Touch Release Switch: Allows for quick power shutdown for enhanced safety.
• Spindellås: Facilitates easy and secure accessory changes.
• Metal Gear Case: Ensures durability and extends the tool's lifespan.

4. Opsætningsvejledning

4.1. Montering af sidehåndtaget

The side handle can be installed in three different positions (left, right, or top) to suit your working preference and application. Simply screw the handle into the desired threaded hole on the gear case until it is secure.

Image 3: The 3-position handle offers flexibility for user comfort and control.

4.2. Montering/udskiftning af slibeskiver

1. Ensure the tool is unplugged from the power source before attempting any accessory changes.
2. Tryk og hold spindellåseknappen nede located on the gear case.
3. Use the provided spanner wrench to loosen the outer flange nut by turning it counter-clockwise.
4. Remove the outer flange nut and the old grinding disc.
5. Place the new 4-1/2 inch grinding disc onto the inner flange, ensuring it is centered.
6. Replace the outer flange nut and tighten it clockwise using the spanner wrench while holding the spindle lock button. Ensure the disc is securely fastened.
7. Adjust the wheel guard to provide maximum protection for your specific application.

5. Betjeningsvejledning

5.1. Tænd/sluk

• To turn the grinder ON, slide the power switch forward. For continuous operation, push the switch fully forward until it locks into place.
• To turn the grinder SLUKKET, press the one-touch release switch (if locked) or slide the power switch backward.

5.2. Slibe- og skæreteknikker

Always allow the grinder to reach full speed before contacting the workpiece. Apply moderate pressure and let the tool do the work. Avoid excessive force, which can cause kickback or damage to the disc and tool.

Image 4: The powerful 6.5-Amp motor delivers 10,000 RPM for efficient grinding and cutting.

For grinding, hold the tool at a 15-30 degree angle to the workpiece. For cutting, hold the tool perpendicular to the workpiece, ensuring the cutting disc is aligned with the cut line.

Image 5: The angle grinder being used for cutting metal, generating sparks.

5.3. Officielle produktvideoer

Watch these official videos for a visual guide on the BLACK+DECKER Angle Grinder:

6. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the life of your angle grinder.

• Rensning: Keep the tool's ventilation openings clean and free from debris. Use a soft brush or compressed air to remove dust and metal particles.
• Ledningsinspektion: Undersøg regelmæssigt netledningen for skader, snit eller flosninger. Udskift beskadigede ledninger med det samme.
• Skiveinspektion: Before each use, check grinding and cutting discs for cracks, chips, or excessive wear. Replace damaged or worn discs.
• Børsteinspektion: Carbon brushes may need periodic replacement. Refer to a qualified service technician for brush inspection and replacement.

7. Fejlfinding

Hvis du støder på problemer med din vinkelsliber, kan du se følgende almindelige problemer og løsninger:

8. Tekniske specifikationer

9. Garanti og support

9.1. Garantioplysninger

This BLACK+DECKER Angle Grinder (Model BDEG400) comes with a 2 års begrænset producentgarantiDenne garanti dækker materiale- eller fabrikationsfejl. Gem venligst din købsbevis i tilfælde af garantikrav.

9.2. Kundesupport

For technical assistance, parts, or service, please contact BLACK+DECKER customer support. Visit the official BLACK+DECKER webwebstedet eller se kontaktoplysningerne på din produktemballage.