Portable 16 Inch Oscillating Stand Fan

Indledning

Tak for købetasing the Status Portable 16 Inch Oscillating Stand Fan. This manual provides essential information for the safe and efficient operation of your new fan. Please read it thoroughly before assembly and use, and retain it for future reference.

Vigtige sikkerhedsinstruktioner

For at mindske risikoen for brand, elektrisk stød eller personskade skal du altid følge disse grundlæggende sikkerhedsforanstaltninger:

• Læs alle instruktioner, før du bruger denne ventilator.
• Betjen ikke en ventilator med en beskadiget ledning eller stik. Kassér blæseren eller returner til et autoriseret serviceværksted til undersøgelse og/eller reparation.
• Før ikke ledningen under gulvtæpper. Dæk ikke ledningen med tæpper, løbere eller lignende belægninger. Anbring ledningen væk fra trafikområdet, og hvor den ikke vil blive snublet over.
• Always unplug the fan from the power outlet when not in use, when moving the fan from one location to another, and before cleaning.
• Stik ikke fingre eller fremmedlegemer ind i ventilations- eller udstødningsåbninger, da dette kan forårsage elektrisk stød eller brand eller beskadige ventilatoren.
• Undgå at blokere luftindtag eller udsugning på nogen måde.
• Do not use outdoors. This fan is designed for indoor use only.
• Denne ventilator er ikke beregnet til brug i vådt eller damp steder.
• Sørg for, at ventilatoren er placeret på en stabil, plan overflade for at forhindre, at den vælter.

Pakkens indhold

Please check the package for the following components:

• Fan Motor Unit with Control Panel
• Front and Rear Grilles
• Ventilatorblade (3 blade)
• Stand Pole (Adjustable Height)
• Base Assembly (Cross-shaped base)
• Fasteners (Screws, nuts, washers)
• Power Cord (Integrated with motor unit)

Opsætning og montering

Follow these steps to assemble your Status Portable 16 Inch Oscillating Stand Fan:

1. Saml basen: Connect the two parts of the cross-shaped base and secure them with the provided screws and nuts.
2. Fastgør stativstangen: Insert the bottom of the stand pole into the assembled base. Tighten the securing knob or screw at the base to ensure stability.
3. Monter motorenheden: Place the fan motor unit onto the top of the stand pole. Secure it firmly using the provided fastening mechanism, usually a large screw or knob.
4. Installer baggitteret: Position the rear grille onto the motor unit, aligning the mounting holes. Secure it with the provided retaining nut or clips.
5. Fastgør ventilatorbladene: Slide the fan blades onto the motor shaft. Ensure they are seated correctly and secure them with the blade cap, turning it counter-clockwise to tighten.
6. Installer frontgitteret: Place the front grille over the fan blades and align it with the rear grille. Secure the two grilles together using the clips or screws around the perimeter. Ensure the grilles are securely fastened to prevent accidental contact with the blades.

Betjeningsvejledning

Once assembled, your fan is ready for use:

1. Strømtilslutning: Sæt ventilatorens netledning i en standard 230V AC stikkontakt.
2. Tænd/sluk: Locate the push button controls on the fan's motor unit. Press the '0' button to turn the fan off, and '1', '2', or '3' to turn it on and select a speed.
3. Hastighedsvalg:
   • 1: Low speed for gentle air circulation.
   • 2: Medium hastighed for moderat luftstrøm.
   • 3: Høj hastighed for maksimal køling.
4. Oscilleringsfunktion: To activate the oscillation (side-to-side sweeping motion), pull up the oscillation knob located on top of the motor housing. To stop oscillation, push the knob down.
5. Justering af højde og hældning: Loosen the height adjustment knob on the stand pole to raise or lower the fan. Tighten it firmly once the desired height is reached. The fan head can also be tilted up or down manually to direct airflow.

Vedligeholdelse og pleje

Regular cleaning will help maintain your fan's performance and extend its lifespan:

• Tag altid stikket ud af ventilatoren fra strømkilden før rengøring.
• Rengøring af ydersiden: Brug en blød, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents, as they may damage the plastic.
• Rengøring af riste og knive: Dust and lint can accumulate on the grilles and blades. For thorough cleaning, you may carefully remove the front grille (refer to assembly instructions in reverse) to access the blades. Use a soft brush or vacuum cleaner with a brush attachment to remove dust. Wipe blades with a damp cloth if necessary. Ensure all parts are completely dry before reassembling and operating the fan.
• Opbevaring: Når ventilatoren ikke er i brug i længere perioder, skal den opbevares køligt og tørt, helst i originalemballagen, for at beskytte den mod støv og skader.

Fejlfinding

If you experience issues with your fan, consult the following table:

Specifikationer

Garanti og support

This product is covered by a standard manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included in your product packaging or contact Status customer support directly. Keep your purchase receipt as proof of purchase.

For technical support, spare parts, or service inquiries, please contact the Status customer service department. Contact information can typically be found on the product packaging or the official Status webwebsted.