Hype HY-BTWTR-BLK Hydro Sound Bluetooth Vanddansende Højttalere Brugermanual

1. Introduktion

Tak for købetasing the Hype HY-BTWTR-BLK Hydro Sound Bluetooth Water Dancing Speakers. These speakers combine high-quality audio with a dynamic water and light show, enhancing your listening experience. This manual provides essential information for the safe and efficient operation of your new speakers.

2. Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt før brug.
• Udsæt ikke højttalerne for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
• Keep the speakers away from water sources to prevent electrical shock, as they are not waterproof.
• Do not attempt to disassemble or modify the speakers. This will void the warranty and may cause damage.
• Brug kun det medfølgende opladningskabel eller et tilsvarende certificeret kabel.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Tjek venligst pakken for følgende varer:

• Hype Hydro Sound Bluetooth Water Dancing Speakers (2 units)
• USB opladningskabel
• 3.5 mm lydkabel
• Brugervejledning (dette dokument)

4. Produktet er slutview

Familiarize yourself with the components of your Hype Water Dancing Speakers.

Billede 1: Forside View of Speakers. This image displays the front of two Hype Hydro Sound Bluetooth Water Dancing Speakers. Each speaker features a clear, conical top housing the water and light elements, and a black base containing the speaker driver and control button. The water jets are visible within the clear section, ready to synchronize with audio.

Billede 2: Bagside View of Speaker. This image shows the rear panel of one Hype Hydro Sound Bluetooth Water Dancing Speaker. From left to right, the visible ports and controls include a 5V DC charging input, an AUX input for wired connections, and a power switch/button. These elements facilitate charging and connectivity options for the speaker.

Højttalerkomponenter:

• Water Jet Chamber: Clear top section where water and LED lights create the dancing effect.
• Højttalerdriver: Located in the base for audio output.
• Power knap: Turns the speakers on/off.
• 5V DC indgang: Til opladning af det interne batteri.
• AUX-indgang: Til kablet lydforbindelse ved brug af 3.5 mm-kablet.

5. Opsætning

5.1 Opladning af højttalerne

1. Connect the small end of the USB charging cable to the 5V DC input port on the back of one speaker.
2. Tilslut den større ende af USB-kablet til en USB-strømadapter (medfølger ikke) eller en computers USB-port.
3. Opladningsindikatorlampen (hvis den er til stede) lyser under opladning og slukker, når den er fuldt opladet.
4. A full charge typically takes 2-3 hours and provides approximately 5 hours of playback.

Note: Both speakers are powered by a single connection. Ensure both speakers are connected to each other via the integrated cable for full functionality.

5.2 Tænd/sluk

• To power on, press and hold the Power button on the main speaker until you hear an audible prompt or see an indicator light.
• For at slukke skal du trykke på tænd/sluk-knappen igen og holde den nede.

6. Betjeningsvejledning

6.1 Bluetooth -parring

1. Ensure the speakers are powered on and within 10 meters (33 feet) of your Bluetooth-enabled device.
2. The speakers will automatically enter pairing mode, indicated by a flashing LED light.
3. Gå til Bluetooth-indstillingerne på din enhed (smartphone, tablet, bærbar computer) og søg efter tilgængelige enheder.
4. Select "HY-BTWTR-BLK" or a similar name from the list.
5. Når parringen er afsluttet, hører du en bekræftelseslyd, og LED-lyset holder op med at blinke.
6. The speakers will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.

6.2 AUX Input Connection

For devices without Bluetooth or for a wired connection:

1. Connect one end of the 3.5mm audio cable to the AUX input port on the back of the speaker.
2. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output of your device.
3. The speakers will automatically switch to AUX mode.

6.3 Music Playback and Water Dancing

• Once connected via Bluetooth or AUX, start playing music on your connected device.
• The water jets inside the speakers will begin to dance and light up in multiple colors, synchronizing with the beat and volume of the music.
• Adjust the volume from your connected device.

7. Vedligeholdelse

• Rensning: Use a soft, dry cloth to wipe the exterior of the speakers. Do not use abrasive cleaners or allow water to enter any openings.
• Opbevaring: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight.
• Batteripleje: To prolong battery life, fully charge the speakers before storing them for long periods and recharge them every 3-6 months.

8. Fejlfinding

9. Specifikationer

• Model: HY-BTWTR-BLK
• Højttalertype: Desktop
• Forbindelse: Bluetooth, 3.5 mm AUX
• Kompatible enheder: Bærbar computer, smartphone, tablet
• Farve: Sort
• Produktvægt: 200 gram
• Vandtæt: Ingen
• Strømkilde: Internt genopladeligt batteri
• Wattage: 3 watt
• Gennemsnitlig batterilevetid: Op til 5 timer
• Produktdimensioner: 10 x 4 x 4 cm (per speaker, approximate)

10. Garanti og support

Hype products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your original packaging for specific terms and conditions.

For technical support, warranty claims, or further assistance, please contact Hype customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt. Gem din købsbevis for at validere garantien.