Indledning
The Hach Pocket Pro Low Range TDS Tester is designed to provide accurate and reliable measurements of Total Dissolved Solids (TDS) in various water samples. This compact and easy-to-use device features built-in diagnostics, replaceable batteries, and a large, easy-to-read LCD screen, making it ideal for field and laboratory use. This manual provides essential information for the proper setup, operation, and maintenance of your TDS tester.
Hvad er der i æsken
- Hach Pocket Pro Low Range TDS Tester
- 4 AAA batterier
- Snor
- Kalibreringsløsning
- Hurtig start guide
Nøglefunktioner
- Confidence in results
- Spar tid og penge
- Brugervenlighed
Opsætning
Installation af batteri
- Locate the battery compartment cover on the back of the tester.
- Fjern dækslet.
- Insert 4 AAA batteries, ensuring correct polarity as indicated inside the compartment.
- Sæt batterirummets dæksel på igen.
Indledende kalibrering
For optimal accuracy, it is recommended to perform an initial calibration upon first use or after prolonged storage. Use the provided calibration solution for this process. Refer to the quick start guide for detailed calibration steps specific to your model.
Betjeningsvejledning
Tænd/sluk
Press the power button (circular arrow icon) to turn the tester on. Press and hold the power button for a few seconds to turn it off.
At tage en måling
- Ensure the tester is clean and dry before use.
- Immerse the probe end of the tester into the sampopløsningen, og sørg for at sensoren er helt nedsænket.
- Allow a few moments for the reading to stabilize on the large LCD screen. The display will show the TDS value and temperature.
- Record the measurement as needed.
- Rinse the probe with distilled water after each measurement to prevent cross-contamination.
Forstå skærmen
The LCD screen displays the primary measurement (TDS) and the temperature. The device includes built-in diagnostics to assist with troubleshooting and ensure reliable readings.
Opretholdelse
Rengøring af sonden
Regular cleaning of the probe is crucial for accurate readings. Rinse the probe thoroughly with distilled or deionized water after each use. For stubborn residues, gently wipe the probe with a soft cloth or cotton swab. Avoid abrasive materials that could damage the sensor.
Udskiftning af batteri
When the battery indicator appears on the display, replace the 4 AAA batteries as described in the Setup section. Always use fresh batteries for optimal performance.
Opbevaring
Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the probe is clean and dry before storage. If storing for extended periods, remove the batteries to prevent leakage.
Fejlfinding
Upræcise aflæsninger
- Sørg for, at sonden er ren og fri for snavs.
- Perform a calibration using fresh calibration solution.
- Check for air bubbles around the probe during measurement.
- Bekræft sample temperature is within the operating range.
No Display/Power Issues
- Kontroller, om batterierne er korrekt installeret og har tilstrækkelig opladning. Udskift om nødvendigt.
- Sørg for, at batterirummets dæksel er forsvarligt lukket.
Langsom responstid
- Clean the probe thoroughly.
- Allow sufficient time for the reading to stabilize, especially in samples with varying temperatures.
Specifikationer
| Attribut | Værdi |
|---|---|
| Modelnummer | 9531200 |
| Mærke | HACH |
| Måletype | TDS måler |
| Strømkilde | Batteridrevet |
| Batterier påkrævet | 4 AAA batterier (medfølger) |
| Varens vægt | 9.6 ounce |
| Pakkedimensioner | 8.74 x 4.72 x 2.36 tommer |
| Fabrikant | Hach |
| Dato først tilgængelig | 16. december 2014 |
Garanti og support
Hach products are manufactured to high standards of quality and reliability. For specific warranty information pertaining to your Hach 9531200 Pocket Pro Low Range TDS Tester, please refer to the documentation included with your purchase or visit the official Hach webwebsted.
For further assistance, technical support, or to explore other Hach products, please visit the HACH Store on Amazon.
