DB Electrical New 410-40062 Automotive Starter User Manual

1. Produktet er slutview

This manual provides essential information for the DB Electrical 410-40062 Automotive Starter. This component is designed as a direct replacement for original equipment starters in compatible vehicles, ensuring reliable engine starting performance.

Nøglefunktioner:

• Specifikationer: Starter, Voltage: 12, Rotation: CW, Teeth: 11, KW: 1.3
• Replaces OEM Numbers: Hyundai: 36100-2E120, 36100-2E120RU, Pic: 108-580, Lester: 19224, Lucas Electrical Europe: LRS02674, Valeo: 1195411
• 1-year warranty protects you after your purchase.
• 100% New Aftermarket Starter built to meet OEM specifications.

Specifikationer:

2. Opsætning og installation

Installation of an automotive starter requires mechanical knowledge and specialized tools. For optimal safety and performance, professional installation by a certified mechanic is highly recommended. Always ensure the vehicle's battery is disconnected before beginning any work on the electrical system.

General Installation Steps (Consult a service manual for your specific vehicle model):

1. Sikkerhed først: Frakobl den negative pol på køretøjets batteri for at forhindre kortslutninger.
2. Find starteren: Identify the starter motor's location, typically on the side of the engine block near the transmission.
3. Afbryd ledninger: Carefully disconnect all electrical connections to the old starter, including the main battery cable and the solenoid wire.
4. Fjern monteringsboltene: Unbolt the old starter from the engine block or transmission housing. Note the position and type of all fasteners.
5. Fjern den gamle starter: Carefully extract the old starter motor from its position.
6. Installer ny starter: Position the new DB Electrical starter in place and secure it with the mounting bolts. Ensure proper alignment.
7. Tilslut ledningerne igen: Reattach all electrical connections to the new starter, ensuring they are clean and secure.
8. Gentilslut batteri: Tilslut den negative batteripol igen.
9. Test funktionalitet: Start the vehicle to confirm proper operation of the new starter.

3. Driftsprincipper

The automotive starter motor is an electric motor that rotates the engine's flywheel to initiate the combustion process. When the ignition key is turned to the 'start' position, electrical current flows from the battery to the starter solenoid. The solenoid then engages the starter motor's pinion gear with the engine's flywheel and simultaneously allows a large current to flow to the starter motor. This causes the motor to spin, cranking the engine until it starts. Once the engine begins to run, the solenoid disengages the pinion gear from the flywheel to prevent damage to the starter motor.

4. Vedligeholdelse

While the DB Electrical starter is designed for durability and minimal maintenance, periodic checks can help ensure its longevity and reliable performance:

• Efterse elektriske forbindelser: Periodically check the battery cables and solenoid connections at the starter for corrosion or looseness. Clean any corrosion and ensure connections are tight.
• Batteriets sundhed: Ensure your vehicle's battery is in good condition and fully charged. A weak battery can put excessive strain on the starter.
• Kabelintegritet: Inspect battery cables for fraying, cracks, or damage. Damaged cables can restrict current flow to the starter.
• Undgå overdreven omdrejning: Do not crank the engine for more than 10-15 seconds at a time. Allow the starter to cool for a minute or two between attempts to prevent overheating.

5. Fejlfinding af almindelige problemer

Hvis du oplever problemer med din starter, kan du overveje følgende almindelige problemer og mulige løsninger:

• Engine Cranks Slowly:
  • Mulig årsag: Weak or discharged battery. Løsning: Test and charge/replace battery.
  • Mulig årsag: Corroded or loose battery terminals/cables. Løsning: Clean and tighten all connections.
  • Mulig årsag: High resistance in starter circuit. Løsning: Inspect cables and connections for damage or corrosion.
• Starter Clicks but Engine Does Not Crank:
  • Mulig årsag: Lavt batteri voltage. Løsning: Test and charge/replace battery.
  • Mulig årsag: Defekt startersolenoid. Løsning: Professional diagnosis and replacement if necessary.
  • Mulig årsag: Loose or corroded connections at the starter. Løsning: Inspicer og fastgør forbindelser.
• Ingen krumtap, intet klik:
  • Mulig årsag: Completely dead battery. Løsning: Test and charge/replace battery.
  • Mulig årsag: Blown fuse in the starting circuit. Løsning: Kontroller bilens sikringsboks, og udskift eventuelle sprungne sikringer.
  • Mulig årsag: Faulty ignition switch or neutral safety switch. Løsning: Professional diagnosis.
• Starteren forbliver aktiveret efter motorstart:
  • Mulig årsag: Faulty solenoid or sticky pinion gear. Løsning: Professional diagnosis and replacement.

Hvis fejlfindingstrinene ikke løser problemet, anbefales det at kontakte en kvalificeret biltekniker.

6. Køretøjskompatibilitet

This DB Electrical 410-40062 Automotive Starter is compatible with/replacement for the following vehicle models:

• Hyundai: Elantra 2012, 2013; Elantra Coupe 2013; Elantra GT 2013, 2014; Tucson 2014
• Kia: Forte 2014-2016; Forte Koup 2014; Forte5 2014; Soul 2012, 2003

Always verify the part fits your specific vehicle before purchasing og installation.

7. Garanti og support

DB Electrical offers a 1 års garanti on this product, protecting you after your purchase. We are confident that our products will work flawlessly once installed in your vehicle. However, in the rare case that it does not, we will replace it anytime within one year of your order. If you encounter any problems, please contact DB Electrical for assistance and replacement options. We are committed to ensuring customer satisfaction.

8. Visuelle hjælpemidler

Produktbilleder:

Officielle produktvideoer: