1. Introduktion
The CONTEC CMS50D2 Pulse Oximeter is a non-invasive device designed for measuring the oxygen saturation of arterial hemoglobin (SpO2) and the pulse rate. This device is intended for spot-checking and continuous monitoring of adult and pediatric patients in home and clinical environments. It provides a quick and accurate assessment of respiratory function.
The concentration of oxygen determines the percentage of hemoglobin in arterial blood that is saturated with oxygen, making it an important parameter for evaluating respiratory function. The device is small, lightweight, and portable, making it convenient for use anywhere.
2. Sikkerhedsoplysninger
Please read all safety warnings and instructions carefully before using this device. Improper use may result in inaccurate readings or device damage.
- Brug ikke pulsoximeteret i et MRI- eller CT-miljø.
- Do not use the device in environments with flammable anesthetics.
- The device is not intended for continuous monitoring of patients requiring constant supervision.
- Hold enheden væk fra vand og fugt.
- Consult a medical professional for interpretation of readings and before making any medical decisions.
3. Produktfunktioner
- Determines arterial oxygen saturation (SpO2) and pulse rate (PRbpm).
- Displays SpO2 value and pulse rate value.
- Lav voltage indicator and audible alarm if pulse is above set limit.
- Suitable for individuals with heart failure, chronic obstructive pulmonary diseases, bronchial asthma, and for high-altitude sports (mountaineering, skiing, aviation).
- Adjustable display mode and screen brightness.
- OLED display in blue and yellow with pulse waveform graph.
- Automatic power-off: The device will turn off automatically in 5 seconds if the finger is improperly placed or removed.
4. Pakkens indhold
Produktpakken indeholder typisk følgende varer:
- 1 x CONTEC CMS50D2 Pulse Oximeter
- 1 x snor
- 2 x AAA batterier
- 1 x brugermanual
5. Opsætning
5.1. Batteriinstallation
The CMS50D2 Pulse Oximeter requires two AAA batteries for operation. Ensure correct polarity when inserting the batteries.
- Åbn batteridækslet, der er placeret på bagsiden af enheden.
- Insert two AAA batteries according to the polarity indicators (+ and -) inside the compartment.
- Luk batterirummets dæksel forsvarligt.
Figur 1: Forside view of the Andon CMS50D2 Pulse Oximeter, showing the OLED display and finger insertion area.
6. Betjeningsvejledning
Follow these steps to obtain accurate readings:
- Sørg for, at batterierne er korrekt installeret.
- Åbn clamp af oximeteret.
- Insert one of your fingers (preferably the index, middle, or ring finger) into the rubber opening of the oximeter, ensuring the nail surface is facing upwards towards the display.
- Slip clamp, allowing the oximeter to securely hold your finger.
- Press the power button on the top of the device to turn it on.
- Keep your hand still during the measurement. Do not shake your finger.
- The readings for SpO2 and pulse rate will appear on the display within a few seconds.
- To change the display orientation or brightness, briefly press the power button while the device is on.
- The device will automatically power off after 5 seconds of inactivity or if the finger is removed.
Figure 2: The pulse oximeter correctly placed on a finger, displaying SpO2 and pulse rate readings.
7. Vis oplysninger
The OLED display provides the following information:
- SpO2: Peripheral Oxygen Saturation (percentage). This indicates the percentage of hemoglobin in your blood that is saturated with oxygen. Normal values typically range from 95% to 100%.
- PRbpm: Pulse Rate (beats per minute). This is the number of times your heart beats per minute. Normal adult resting heart rate ranges from 60 to 100 bpm.
- Pulssøjlediagram: A vertical bar graph indicating the strength of the pulse.
- Plethysmograph (Waveform): A graphical representation of the pulse, showing blood flow through the finger.
- Batteriindikator: Viser den resterende batterilevetid.
8. Vedligeholdelse og pleje
8.1. Rensning
Clean the surface of the oximeter before and after each use. Use a soft cloth dampened with medical alcohol (70% ethanol or isopropanol) to wipe the surface. Do not immerse the device in liquid.
8.2. Opbevaring
Opbevar enheden et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer. Hvis enheden ikke skal bruges i længere tid, skal du fjerne batterierne for at forhindre lækage.
9. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet display efter tænding | Batterierne er døde eller forkert installeret. | Udskift batterierne, eller sæt dem korrekt i igen, og overhold polariteten. |
| Unøjagtige aflæsninger | Finger not inserted properly; patient movement; strong ambient light; nail polish or artificial nails. | Re-insert finger correctly; remain still; shield from strong light; remove nail polish/artificial nails. |
| "Finger Out" or "Error" message | Finger not detected or poor signal quality. | Ensure finger is fully inserted and still. Try a different finger. |
| Displayet er svagt | Low battery or brightness setting. | Replace batteries. Adjust brightness by pressing the power button. |
10. Specifikationer
- Modelnavn: CMS50D2
- Fabrikant: Andon (CONTEC)
- Dimensioner: 7.62 x 2.54 x 5.08 cm
- Vægt: 25 g
- Strømkilde: 2 x AAA batterier (medfølger)
- Batterilevetid: Cirka 50 timers kontinuerlig drift
- Måleområde (SpO2): 70-100 %
- Skærmtype: OLED, blue and yellow
- Automatisk slukning: Ja, efter 5 sekunders inaktivitet
- Oprindelsesland: Schweiz
11. Garanti og support
Specific warranty details for the CONTEC CMS50D2 Pulse Oximeter may vary depending on the region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed warranty information.
For technical support or inquiries, please contact the manufacturer, CONTEC, or the authorized seller from whom you purchased the device. Keep your purchase receipt as proof of purchase.
