1. Introduktion
The Alpine PWE-S8 is a compact, powered 8-inch subwoofer designed to enhance your vehicle's audio system with powerful and accurate bass. Its integrated amplifier and shallow-mount design allow for flexible installation in various vehicle types, including under or behind seats, in trunks, or in SUV hatches. This manual provides essential information for the proper installation, operation, and maintenance of your PWE-S8 subwoofer.
2. Sikkerhedsoplysninger
- Elektrisk sikkerhed: Always disconnect the vehicle's negative battery terminal before beginning any installation. Ensure all wiring is correctly connected and fused to prevent electrical shorts or damage.
- Køretøjssikkerhed: Mount the subwoofer securely to prevent it from becoming a projectile during sudden stops or collisions. Do not obstruct vehicle controls or safety devices.
- Høreværn: Prolonged exposure to high volume levels can cause permanent hearing damage. Adjust volume to a safe and comfortable level.
- Professionel installation: If you are unsure about any part of the installation process, it is recommended to seek assistance from a qualified professional installer.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Alpine PWE-S8 Powered Subwoofer Unit
- Wiring Harness (Power/Speaker Level Input)
- Remote Bass Level Control Knob with Cable
- Monteringsudstyr (beslag, skruer)
- Brugermanual (dette dokument)
4. Produktet er slutview
The PWE-S8 features a durable cast aluminum enclosure housing an 8-inch subwoofer and a built-in Class D amplifier. Its compact dimensions allow for versatile placement within your vehicle.
Figur 4.1: Forside view of the Alpine PWE-S8 subwoofer, showcasing dens kompakte design og beskyttelsesgitter.
Figure 4.2: Alpine PWE-S8 subwoofer with approximate dimensions (15 inches / 37 cm in length shown for reference).
4.1 Betjeningselementer og tilslutninger på bagpanelet
The rear panel provides all necessary connections and adjustment controls for integrating the subwoofer into your audio system.
Figur 4.3: Detaljeret view of the PWE-S8 rear panel, showing input and control options.
- FASE-omskifter: Justerer fasen for subwooferudgangen (0° eller 180°).
- Få kontrol: Matches the input sensitivity of the subwoofer to the output of your head unit.
- LP CROSSOVER Control: Sets the low-pass filter frequency (typically 50Hz-150Hz).
- REMOTE SUB LEVEL Input: Connects the wired remote bass level control.
- RCA-INDGANG: For connecting to head units with RCA pre-outs.
- SPEAKER LEVEL INPUTS: For connecting to head units without RCA pre-outs, using speaker wires.
- POWER/GROUND/REMOTE Terminal: For main power, ground, and remote turn-on connections.
5. Opsætning og installation
Careful installation is crucial for optimal performance and safety. Plan your wiring and mounting location before beginning.
5.1 Monteringssted
The compact design of the PWE-S8 allows for flexible mounting:
- Under a seat (ensure adequate clearance and ventilation).
- Behind a seat (in trucks or SUVs).
- I bagagerummet på en sedan.
- In the hatch area of an SUV.
Ensure the chosen location is dry, well-ventilated, and does not interfere with vehicle operation or passenger safety. Secure the unit using the provided mounting hardware.
5.2 Ledningsforbindelser
Follow these general guidelines for wiring. Refer to the detailed wiring diagram in the full owner's manual for specific connections.
- Strøm (BATT+): Connect the main power wire directly to the vehicle's positive battery terminal. Use an appropriate gauge wire and install a fuse (not supplied, typically 15A-20A) within 18 inches of the battery.
- Jord (GND): Connect the ground wire to a clean, unpainted metal surface of the vehicle chassis. Ensure a solid electrical connection.
- Fjerntænding (REM): Connect this wire to the remote turn-on output of your head unit. This signal turns the subwoofer on and off with your audio system. If your head unit lacks a remote output, some units can use speaker-level input sensing for automatic turn-on.
- Lydindgang:
- RCA-indgang: Connect RCA cables from your head unit's subwoofer pre-out or full-range pre-outs to the RCA INPUTS on the PWE-S8.
- Højttalerniveauindgang: If using speaker-level inputs, connect the vehicle's speaker wires (front or rear) to the SPEAKER LEVEL INPUTS on the PWE-S8 wiring harness.
- Fjernbetjening af basniveau: Connect the provided remote control cable to the REMOTE SUB LEVEL input on the PWE-S8. Mount the control knob in an accessible location for easy adjustment.
6. Betjening og justeringer
Once installed, fine-tune the subwoofer's settings for optimal sound integration with your vehicle's audio system.
- Få kontrol: Start with the gain control at its minimum setting. Play music with strong bass and slowly increase the gain until the subwoofer output blends smoothly with your main speakers without distortion. Avoid setting the gain too high, as this can cause clipping and damage.
- LP CROSSOVER Control: Adjust this control to set the upper frequency limit for the subwoofer. A common starting point is between 80Hz and 100Hz. Experiment to find the setting that provides the best blend with your main speakers, ensuring bass notes are localized to the front of the vehicle rather than the subwoofer's location.
- FASE-omskifter: Listen to music with strong bass. Toggle the phase switch between 0° and 180°. Choose the setting that produces the loudest and most impactful bass response. This corrects any phase cancellation issues between the subwoofer and main speakers.
- Fjernbetjening af basniveau: Use this knob to conveniently adjust the subwoofer's output level from your driving position, allowing for on-the-fly adjustments based on music genre or personal preference.
7. Vedligeholdelse
The Alpine PWE-S8 requires minimal maintenance to ensure long-lasting performance.
- Rensning: Use a soft, dry cloth to wipe the exterior of the unit. Do not use harsh chemicals or abrasive cleaners.
- Ventilation: Ensure that the subwoofer's heat sinks and ventilation areas are not obstructed to prevent overheating.
- Forbindelser: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de er fastgjorte og fri for korrosion.
8. Fejlfinding
If you experience issues with your PWE-S8, consult the following table before seeking professional service.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm/Ingen indikatorlampe | Sprunget sikring; Løs strøm-/jordforbindelse; Intet fjerntændingssignal. | Check and replace fuse; Verify all power and ground connections; Check remote turn-on wire from head unit. |
| Ingen lyd fra subwooferen | No audio input signal; Gain set too low; Head unit settings incorrect. | Verify RCA or speaker level input connections; Increase gain control; Check head unit's subwoofer output or balance settings. |
| Forvrænget lyd | Gain set too high; Input signal too strong; Damaged speaker. | Reduce gain control; Check head unit's output level; If distortion persists at low gain, speaker may be damaged (contact support). |
| Svag eller uklar bas | Phase incorrect; LP Crossover set too low; Subwoofer not properly blended. | Toggle PHASE switch; Adjust LP CROSSOVER frequency higher; Re-adjust GAIN for proper blend. |
9. Specifikationer
Technical specifications for the Alpine PWE-S8 powered subwoofer:
- RMS effekt: 120 watt
- Spidseffekt: 240 watt
- Subwoofer størrelse: 8 tommer
- Frekvensrespons: 32 Hz - 150 Hz
- Amplivligere Type: Klasse D
- Indkapslingsmateriale: Støbt aluminium
- Dimensioner (omtrentlige): 13.5" (L) x 9" (W) x 3" (D)
- Input følsomhed: RCA (0.1V - 4.0V), Speaker Level (0.5V - 10V)
- Lavpas-crossover: 50 Hz - 150 Hz (variable)
- Fasestyring: 0° / 180° (selectable)
- Forbindelse: RCA, Speaker Level
- Varens vægt: 11 pund
10. Garanti og support
Alpine products are designed for reliability and performance. This product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Alpine webwebsted.
For technical support, product registration, or to locate an authorized service center, please visit the official Alpine USA website or contact Alpine customer service directly. Contact information can typically be found on the Alpine webwebstedet eller i din produktemballage.
