Eko 06217039

Eko NXT Series Nylon Cutaway Acoustic Electric Guitar Instruction Manual

Model: 06217039

Indledning

This manual provides essential information for the setup, operation, and maintenance of your Eko NXT Series Nylon Cutaway Acoustic Electric Guitar. Please read it thoroughly to ensure optimal performance and longevity of your instrument.

Nøglefunktioner

  • Classical guitar body with a cutaway design for improved upper fret access.
  • Agathis wood used for the top, back, and sides, contributing to its acoustic properties.
  • Lav profile mahogany neck with a rosewood fingerboard for comfortable playability.
  • Integrated EQ system with a built-in tuner for amplified sound and accurate tuning.
  • Equipped with a durable plastic nut and saddle.
  • Finished in a sleek black with a high gloss coating.

Opsætning

1. Udpakning og inspektion

Carefully remove the guitar from its packaging. Inspect the instrument for any signs of damage that may have occurred during shipping. Ensure all components are present.

2. Stemning af guitaren

Your Eko NXT guitar is equipped with an onboard tuner. To use it:

  1. Press the "Tuner" button on the EQ unit to activate the tuner. The display will illuminate.
  2. Pluck each string individually. The display will show the note being played and indicate if it is sharp, flat, or in tune.
  3. Adjust the tuning pegs until each string is accurately tuned to its standard pitch (E, A, D, G, B, E from thickest to thinnest string).
  4. Press the "Tuner" button again to deactivate the tuner.

3. Stringing (If necessary)

The guitar comes pre-strung with nylon strings. If strings need replacement:

  1. Remove old strings one at a time to maintain neck tension.
  2. Thread the new nylon string through the bridge hole and tie a knot to secure it.
  3. Feed the other end through the tuning machine post and wind it securely.
  4. Stretch the new strings gently and tune them. Nylon strings require several tuning cycles to stabilize.

Operating the Acoustic-Electric Features

Your Eko NXT guitar features an integrated EQ system for ampforbedret ydeevne.

1. Forbindelse til en Amplivligere

Locate the output jack, typically on the lower bout or endpin of the guitar. Connect a standard 1/4-inch instrument cable from this jack to your amplifier eller PA system.

2. EQ Controls

The onboard EQ unit allows you to shape your amplified tone. Common controls include:

  • Bind: Justerer det samlede outputniveau.
  • Bas: Styrer lavfrekvensresponsen.
  • Mellem: Styrer midtfrekvensresponsen.
  • Diskant: Styrer højfrekvensresponsen.

Experiment with these controls to find your desired sound. Start with all controls at the center (flat) position and make small adjustments.

3. Udskiftning af batteri

The EQ and tuner are powered by a battery, usually located in a compartment on the side of the guitar or within the EQ unit itself. When the battery is low, the tuner display may dim or the amplified sound may become distorted. Replace the battery with the recommended type (e.g., 9V) as needed.

Opretholdelse

1. Rensning

Wipe down the guitar body, neck, and strings with a soft, lint-free cloth after each use to remove sweat and oils. For a deeper clean, use guitar-specific cleaning products sparingly.

2. Opbevaring

Store your guitar in a stable environment, away from extreme temperature changes and humidity fluctuations. A guitar case or gig bag provides protection from dust and minor impacts.

3. Udskiftning af strenge

Nylon strings should be replaced periodically, typically every 3-6 months depending on usage, to maintain optimal tone and playability.

Fejlfinding

  • No Sound When Plugged In: Check the instrument cable, amplifier power, and ensure the guitar's battery is charged.
  • Forvrænget AmpLificeret lyd: This often indicates a low battery. Replace the battery. Also, check amplifier indstillinger.
  • Fret Buzz: Minor fret buzz can be caused by low string action or uneven frets. If persistent, professional setup may be required.
  • Tuning-ustabilitet: New nylon strings take time to stretch and stabilize. Ensure strings are properly wound on tuning posts.

Specifikationer

FeatureDetalje
Modelnummer06217039
KropsmaterialeAgathis (Top, Back, Sides)
Hals materialeMahogni
Gribebræt materialePalisander
Nut and Saddle MaterialPlast
StrengematerialeNylon
FarveBlack (High Gloss Finish)
AfhentningskonfigurationS (Single)
Bridge SystemFast
Antal strenge6
HåndorienteringHøjre
Varens vægt5.2 pund
Produktdimensioner40 x 8 x 5 tommer
Først tilgængelig16. oktober 2014

Produktbilleder

Fuld front view of the Eko NXT Series Nylon Cutaway Acoustic Electric Guitar in black.
Fuld front view of the Eko NXT Series Nylon Cutaway Acoustic Electric Guitar, showcasing its black high-gloss finish and classical body shape with a cutaway.
Front view of the Eko NXT Series Nylon Cutaway Acoustic Electric Guitar.
En anden front view of the Eko NXT Series Nylon Cutaway Acoustic Electric Guitar, highlighting the soundhole rosette and bridge.
Side profile of the Eko NXT Series Nylon Cutaway Acoustic Electric Guitar showing the thin body and electronics.
Side profile view of the Eko NXT guitar, illustrating its thin body design and the integrated electronic controls for the EQ and tuner.
Bag view of the Eko NXT Series Nylon Cutaway Acoustic Electric Guitar.
Bag view of the Eko NXT guitar, displaying the smooth black finish on the back of the body and neck.
Angled close-up of the Eko NXT Series Nylon Cutaway Acoustic Electric Guitar body, showing the soundhole and controls.
Angled close-up of the guitar's body, focusing on the oval soundhole, bridge, and the side-mounted EQ control panel.

Officielle produktvideoer

Der er ingen officielle produktvideoer fra sælgeren tilgængelige til indlejring på nuværende tidspunkt.

Garanti og support

For information regarding warranty coverage, technical support, or service, please refer to the official Eko Guitars website or contact your authorized dealer. Specific warranty terms may vary by region and purchase date.

Relaterede dokumenter - 06217039

Preview Eko DUO hurtigstartguide: Opsætning, brug og appintegration
En kortfattet guide til opsætning og brug af Eko DUO digitalt stetoskop, inklusive opladning, installation af ørestykke, app-tilslutning og lyd-/EKG-optagelse.
Preview Eko Low Ejection Fraction Tool (ELEFT) Brugermanual - Omfattende guide
Brugermanual til Eko Low Ejection Fraction Tool (ELEFT), en software designet til beslutningsstøtte i forbindelse med identifikation af personer med lav ejektionsfraktion. Indeholder tekniske specifikationer, systemkrav og brugsvejledning.
Preview Brugsanvisning EKO Model ICE : Guide Komplet
Manuel d'utilisation détaillé pour la montre EKO Model ICE. Apprenez à régler l'heure, la date, l'alarme, utiliser le chronomètre et découvrez les caractéristiques du produit.
Preview Manuel d'utilisation Eko SAFE: Guide complet pour votre montre connectée enfant
Découvrez le manuel d'utilisation complet pour la montre connectée Eko SAFE. Apprenez à configurer, utiliser les fonctions, et résoudre les problèmes courants de ce dispositif pour enfants.
Preview CORE 500™ digitalt stetoskop: Brugsanvisning og sikkerhedsoplysninger
Omfattende guide til Eko CORE 500™ digitalt stetoskop, der dækker opsætning, betjening, sikkerhedsforanstaltninger, tekniske specifikationer og overholdelse af lovgivningen. Lær, hvordan du bruger dette avancerede medicinske udstyr til auskultation og EKG-overvågning.
Preview Brugsanvisning CORE 500™ Estetoscopio Digital Eko
Fuldstændig brugsvejledning til estetoskopi digital Eko CORE 500™. Aprenda sobre sus características, instalación, operation segura, y especificaciones técnicas para profesionales de la salud y usuarios no profesionales.