1. Introduktion
This manual provides essential information for the safe and efficient use of your Gewiss GW30411 Electronic 2-Channel Programmer. Please read these instructions carefully before installation and operation, and retain them for future reference. The GW30411 is designed for precise control of electrical circuits over time.
2. Sikkerhedsoplysninger
WARNING: Risk of electric shock. Installation and maintenance should only be performed by qualified personnel.
- Afbryd altid strømmen, før du installerer eller servicerer enheden.
- Ensure all wiring complies with local electrical codes and regulations.
- Udsæt ikke enheden for fugt, ekstreme temperaturer eller ætsende miljøer.
- Do not attempt to open or modify the device; there are no user-serviceable parts inside.
- Opbevares utilgængeligt for børn.
3. Produktet er slutview
The Gewiss GW30411 is an electronic 2-channel programmer designed for managing electrical loads with timed switching. It features a clear digital display and intuitive controls for setting programs.
Figur 1: Forside view of the Gewiss GW30411 Programmer. The display shows the current time (10:22), day (VE 13 GIU, likely Friday 13th June), and the 'ON' status, indicating an active program. Buttons for navigation and setting are visible on the right side.
Nøglefunktioner:
- Digital display for time and program status.
- Two independent channels for flexible programming.
- Manual override function.
- Kompakt design for nem installation.
4. Opsætning og installation
Installation should be carried out by a qualified electrician. Ensure the main power supply is disconnected before proceeding.
4.1 Montering
Mount the programmer in a suitable electrical enclosure or on a DIN rail, ensuring adequate ventilation and protection from environmental factors.
4.2 Ledningsføring
- Identify the power supply terminals (L and N) and connect them according to the wiring diagram provided with the product packaging.
- Connect the load wires for Channel 1 and Channel 2 to their respective output terminals.
- Double-check all connections for security and correctness before restoring power.
Refer to the detailed wiring diagram included in the product packaging for specific terminal assignments.
5. Betjeningsvejledning
After successful installation and power-up, the device will display the current time or a default setting. Use the buttons on the right side of the unit to navigate menus and set parameters.
5.1 Indstilling af starttidspunkt og dato
- Tryk på MENU button (if available, or the primary setting button) to enter the settings mode.
- Naviger til TID/DATO indstilling ved hjælp af OP/NED knapper.
- Adjust the hour, minute, day, month, and year using the +/- or OP/NED knapper.
- Confirm each setting with the ENTER or OK knap.
5.2 Programmering af tænd/sluk-cyklusser
The GW30411 allows you to set specific ON/OFF times for each of its two channels.
- Gå ind i programmeringstilstanden ved at trykke på PROG knap.
- Select the desired channel (Channel 1 or Channel 2).
- Indstil den ønskede ON time (hour and minute) for the first event.
- Indstil den ønskede SLUKKET time (hour and minute) for the first event.
- Specify the days of the week for which the program should be active.
- Save the program and exit programming mode.
5.3 Manuel tilsidesættelse
To temporarily override the programmed schedule, use the ON/OFF or MANUEL button. This typically cycles through ON, OFF, and AUTO modes. The display will indicate the current manual status.
6. Vedligeholdelse
The Gewiss GW30411 programmer requires minimal maintenance.
- Rensning: Tør ydersiden af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Inspektion: Periodically check for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.
7. Fejlfinding
If you encounter issues with your GW30411 programmer, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Displayet er tomt. | Ingen strømforsyning. | Kontroller afbryderen og ledningsforbindelserne. |
| Programmed events are not activating. | Incorrect time/date setting; Program not saved; Manual override active. | Verify time/date; Re-enter and save program; Check manual override status. |
| Enheden reagerer ikke. | Midlertidig softwarefejl. | Disconnect power for 30 seconds, then restore. If problem persists, contact support. |
8. Specifikationer
- Mærke: Gewiss
- Model: GW30411
- Type: Electronic 2-Channel Programmer
- Fabrikant: GEWISS
- ASIN: B00OM8R0GS
- Tilgængelighed af reservedele: Oplysninger utilgængelige
- Softwareopdateringer garanteret indtil: Information ikke tilgængelig
- Date Listed on Amazon.com.be: 20. maj 2022
9. Garanti og support
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Gewiss products are designed for reliability and performance.
If you require technical assistance or have questions not covered in this manual, please contact Gewiss customer support or your authorized distributor. Ensure you have your product model number (GW30411) and purchase details ready.
