Indledning
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Comelit Style/Basis 2612 Audio Handset. This handset is designed for use with Comelit 2-wire Stylekit intercom systems, offering reliable audio communication and door release functionality.
Opsætning og installation
The Comelit Style/Basis 2612 Audio Handset is intended for professional installation within a compatible 2-wire intercom system. Ensure all power is disconnected from the system before beginning installation.
Mounting the Handset
- Select a suitable indoor location for mounting, typically near an entrance or in a central area.
- Secure the mounting bracket (if supplied separately) to the wall using appropriate screws and wall plugs.
- Ensure the mounting height is convenient for all users.
Ledningsforbindelser
- Refer to the specific wiring diagram provided with your Comelit 2-wire Stylekit system for precise connection points.
- Connect the 2-wire bus lines from the main intercom unit to the designated terminals on the handset.
- Ensure all connections are secure and correctly polarized. Incorrect wiring can damage the unit or system.
- After wiring, carefully attach the handset to the mounting bracket.

Figure 1: Comelit Style/Basis 2612 Audio Handset. This image displays the white audio handset, featuring a rectangular body with a speaker and microphone section, and a coiled metallic cord at the bottom for connection to the base unit.
Betjeningsvejledning
Once installed and powered, the Comelit 2612 handset is ready for use.
Besvarelse af et indgående opkald
- When the handset rings, lift the receiver from its cradle.
- Speak clearly into the microphone and listen for the visitor's response through the earpiece.
- To end the conversation, replace the receiver on the cradle.
Door Release Function
- During an active conversation with a visitor, press the designated door release button on the handset. This button is typically marked with a key symbol or similar icon.
- The door will unlock for a short period, allowing the visitor entry.
Opretholdelse
The Comelit 2612 handset requires minimal maintenance to ensure long-term performance.
- Rensning: Use a soft, dry cloth to wipe the exterior of the handset. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the plastic finish or internal components.
- Ledningspleje: Ensure the coiled cord is not excessively stretched or tangled, as this can lead to damage over time.
- Miljøforhold: Keep the handset away from direct sunlight, extreme temperatures, and high humidity.
Fejlfinding
If you encounter issues with your Comelit 2612 handset, refer to the following common problems and solutions.
- No Sound from Handset:
- Check all wiring connections to ensure they are secure and correctly terminated.
- Verify that the main intercom system is powered on and functioning correctly.
- Ensure the handset receiver is properly seated in its cradle when not in use.
- Døråbner virker ikke:
- Confirm that you are pressing the correct door release button.
- Ensure there is an active conversation with the visitor when attempting to release the door.
- Check the wiring to the door lock mechanism and the main intercom unit.
- Forvrænget lyd:
- Inspect the handset's coiled cord for any visible damage or kinks.
- Ensure the handset is not too close to sources of electromagnetic interference.
If problems persist after attempting these solutions, contact a qualified technician or Comelit customer support.
Specifikationer
| Mærke | Comelit |
| Modelnummer | 2612 |
| Varenummer | 2612 |
| Materiale | Plast |
| Strømkilde | Powered via 2-wire intercom system |
| Antal varer i pakken | 1 |
| ASIN | B00OM8OGVA |
| Første ledige dato | 15 januar 2020 |
Garanti og support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your complete Comelit intercom system or visit the official Comelit webwebstedet. Behold din købskvittering som købsbevis.





