Indledning
This instruction manual provides essential information for the proper installation, usage, and maintenance of your Breeze TB300 Standard T-Bolt Clamps. Please read this manual thoroughly before installation to ensure safe and effective operation.
Produkt overview
The Breeze TB300 Standard T-Bolt Clamp is designed for high-strength clamping applications, particularly for securing hoses or pipes. It features a robust construction suitable for demanding environments.
Figure 1: A stainless steel T-Bolt clamp, showing the band, bolt, and nut mechanism. This clamp is designed for securing hoses or pipes in various applications.
Nøglefunktioner:
- 3/4" (19 mm) wide, 100% Stainless Steel Band: Sikrer holdbarhed og korrosionsbestandighed.
- High Strength, One-Piece Stainless Steel Trunnion: Provides robust connection and secure fastening.
- Superior welded construction: Enhances overall strength and reliability.
- Meets or exceeds SAE Spec. J1508 for T-Bolt clamps: Guarantees adherence to industry standards for performance.
Installation og opsætning
Proper installation is crucial for the performance and longevity of the T-Bolt clamp. Follow these steps for secure attachment:
- Prepare the Connection: Ensure the hose or pipe ends are clean and free from debris.
- Placer Clamp: Slide the T-Bolt clamp over the hose or pipe, positioning it correctly over the connection point.
- Align the Bolt: Align the T-bolt with the trunnion and thread the nut onto the bolt.
- Spænd møtrikken: Using an appropriate wrench, gradually tighten the nut. Apply even pressure to ensure uniform clamping force around the circumference of the hose.
- Kontroller for sikker pasform: Continue tightening until the hose is firmly secured and there is no leakage (if applicable). Avoid over-tightening, which can damage the hose or the clamp.
- Verify Torque (Recommended): If a specific torque specification is available for your application, use a torque wrench to achieve the recommended torque value.
Anvendelse og drift
Once installed, the T-Bolt clamp provides a secure and reliable connection. Its operation is passive, maintaining the integrity of the connection under various pressures and vibrations. Regular inspection is recommended to ensure continued performance.
Opretholdelse
To maximize the lifespan and effectiveness of your Breeze TB300 T-Bolt Clamps, consider the following maintenance practices:
- Regelmæssig inspektion: Inspicer cl regelmæssigtamps for any signs of wear, corrosion, or damage. Check for loose nuts or bolts.
- Rensning: If operating in dirty or corrosive environments, clean the clamps as needed to prevent buildup that could affect performance.
- Efterspænding: Over time, vibrations or material settling may cause the clamp to loosen slightly. Re-tighten the nut if necessary to maintain optimal clampkraft.
- Udskiftning: Hvis en clamp shows significant signs of damage, deformation, or severe corrosion, replace it immediately to prevent failure.
Fejlfinding
While T-Bolt clamps are generally reliable, issues can arise. Here are some common problems and their solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Leakage at connection point | Clamp not tight enough; improper hose seating; damaged hose/fitting. | Spænd clamp further (do not over-tighten); re-seat the hose; inspect and replace damaged components. |
| Clamp appears loose | Vibration; material compression; insufficient initial tightening. | Re-tighten the nut; consider using a locking washer if vibrations are severe. |
| Clamp corrosion/damage | Exposure to harsh chemicals; physical impact; end of service life. | Udskift klamp. Ensure proper material selection for the environment. |
Specifikationer
The following are the key specifications for the Breeze TB300 Standard T-Bolt Clamp:
- Modelnummer: TB-300
- Effective Diameter Range: 3" - 3.31" (76.2 mm - 84.1 mm)
- Båndbredde: 19 mm (3/4")
- Materiale: 100% Stainless Steel Band, High Strength One-Piece Stainless Steel Trunnion, Plated Carbon Steel Bolt.
- Overholdelse: Meets or exceeds SAE Spec. J1508 for T-Bolt clamps.
- Varens vægt: 2 Pounds (for the pack of 10)
- Fabrikant: Breeze Ind. Products
Garanti og support
Specific warranty details for the Breeze TB300 Standard T-Bolt Clamps are not provided in this manual. For warranty information or technical support, please contact Breeze Industrial Products directly or refer to their official webwebsted.
