1. Introduktion
This manual provides instructions for the safe installation, operation, and maintenance of your Hampton Bay Black Outdoor LED Wall Lantern. Please read this manual thoroughly before installation and keep it for future reference. This fixture is designed for outdoor use and features an integrated LED light source.
2. Sikkerhedsoplysninger
ADVARSEL: RISIKO FOR ELEKTRISK STØD.
- Always turn off power at the circuit breaker or fuse box before installing, servicing, or cleaning this product.
- Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
- Sørg for, at alle elektriske forbindelser overholder lokale forskrifter og bestemmelser samt den nationale elektriske kode (NEC).
- Installer ikke denne armatur på overflader, der er let brandfarlige.
- This product is suitable for wet locations. Ensure all gaskets and seals are properly seated during installation to maintain water resistance.
- Forsøg ikke at modificere den integrerede LED-lyskilde. Den kan ikke udskiftes af brugeren.
ADVARSEL: RISIKO FOR SKADE.
- Brug sikkerhedsbriller og handsker under installationen.
- Håndter armaturet forsigtigt for at undgå skader.
3. Pakkens indhold
Bekræft, at alle nedenstående dele er inkluderet i din pakke:
- Outdoor LED Wall Lantern (1)
- Mounting Hardware Kit (screws, wire nuts, mounting plate) (1 set)
- Brugsanvisning (dette dokument) (1)
4. Opsætning og installation
Before beginning installation, ensure the power is turned off at the circuit breaker.
Figure 1: Hampton Bay Black Outdoor LED Wall Lantern. This image shows the oval-shaped outdoor LED wall lantern with a black finish and a protective cage over a frosted diffuser. The light is illuminated, showing a warm glow.
- Forbered ledningsføring: Turn off power at the main fuse box or circuit breaker. Remove the old fixture if applicable.
- Fastgør monteringsplade: Fastgør monteringspladen til samledåsen med de medfølgende skruer. Sørg for, at pladen er i vater og fastgjort.
- Foretag elektriske forbindelser:
- Tilslut sort ledningen fra armaturet til sort (varm) ledning fra samledåsen ved hjælp af en trådmøtrik.
- Tilslut hvid ledningen fra armaturet til hvid (neutral) ledningen fra samledåsen ved hjælp af en trådmøtrik.
- Tilslut jord ledningen fra armaturet til jord wire from the junction box (or to the green ground screw on the mounting plate) using a wire nut.
Ensure all wire nuts are securely tightened.
- Monter armaturet: Carefully align the fixture with the mounting plate and secure it using the provided screws. Ensure the fixture is flush against the mounting surface and all seals are properly seated to prevent water intrusion.
- Gendan strøm: Tænd for strømmen igen ved afbryderen. Test lysarmaturet for at sikre, at det fungerer korrekt.
5. Betjeningsvejledning
Denne Hampton Bay LED Wall Lantern operates like a standard outdoor light fixture. Once properly installed and wired to a switch, simply toggle the wall switch to turn the light on or off.
- Tænd/sluk: Brug den tilsluttede vægkontakt til at styre lyset.
- Integreret LED: The fixture uses an integrated LED light source, which does not require bulb replacement.
6. Vedligeholdelse
Your LED wall lantern requires minimal maintenance.
- Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Tør ydersiden af med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de elektriske komponenter.
- LED-pleje: The integrated LED is designed for long-term use and does not require bulb replacement. Do not attempt to open the sealed LED compartment.
- Inspektion: Periodically inspect the fixture for any signs of damage or wear, especially to the wiring and seals.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. |
|
|
| Lyse flimrer. |
|
|
| Vand inde i armaturet. |
|
|
If you experience issues not listed here or if the suggested solutions do not resolve the problem, please contact customer support.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Hampton Bugt |
| Modelnavn | hampton bugt |
| Varenummer | HB8822LED-05 |
| UPC | 046335981164 |
| Lyskildetype | Lysdiode (LED) |
| Farve | Sort |
| Materiale | Legeret stål, aluminium |
| Finish Type | satin |
| Lysstyrke | 1000 lumen |
| Wattage | 10 watt |
| Voltage | 120 volt |
| Monteringstype | Vægmontering |
| Vandmodstandsniveau | Vandtæt |
| Specifikation Met | Energy Star |
| Varens vægt | 2 pund |
| Emnedimensioner (LxBxH) | 11.5 x 24 x 18 tommer |
| Oprindelsesland | Kina |
9. Garanti og support
Hampton Bay products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Hampton Bugt website. For technical support, replacement parts, or general inquiries, please contact Hampton Bay customer service. Contact information can typically be found on the product packaging or the brand's official webwebsted.
Gem venligst dit købsbevis for garantikrav.
