Indledning
This manual provides detailed instructions for the safe installation, operation, and maintenance of your RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture. Please read this manual thoroughly before installation and retain it for future reference.
Vigtige sikkerhedsoplysninger
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til sikringen eller strømafbryderen før installation eller servicering.
- Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle nationale og lokale el-forskrifter.
- Installer ikke i nærheden af brændbare materialer.
- Sørg for, at armaturet er korrekt jordet.
- Forsøg ikke at ændre armaturet.
- Suitable for wet locations, wall mount only.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- RAB Lighting LED Bullet Flood 2x12W Fixture (1)
- Monteringsudstyr (skruer, trådmøtrikker) (1 sæt)
- Instruktionsmanual (1)
Image: RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture in white finish. This image shows the two adjustable LED floodlight heads attached to a central mounting base.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | SMSBULLET2X12NA |
| Strømkilde | Ledningsbaseret elektrisk, 120 volt |
| Wattage | 24 Watts (2x12W LED) |
| Lysudgang | 1664 lumen |
| Farvetemperatur | 5000 Kelvin (Cool White) |
| Lyskildetype | LED |
| Materiale | Metal (Fixture), Plastic (Shade) |
| Finish Type | Hvid |
| Installationstype | Vægmonteret |
| Indendørs/Udendørs brug | Outdoor (Suitable for wet locations) |
| Dimensioner | 14.3 x 8.2 x 7.8 tommer |
| Vægt | 4.99 pund |
Opsætning og installation
Nødvendige værktøjer: Screwdriver, Wire Strippers, Pliers, Electrical Tape, Voltage Tester, Ladder (if necessary).
- Sluk for strømmen: Locate the circuit breaker or fuse box controlling the power to the installation area. Turn off the power completely before proceeding. Verify power is off using a voltage tester.
- Forbered monteringsoverfladen: Ensure the mounting surface is clean, dry, and structurally sound. This fixture is designed for wall mounting only.
- Monter armaturet: Secure the fixture's mounting base to the wall using the provided mounting hardware. Ensure a tight and stable connection.
- Ledningsforbindelser: Connect the fixture's wires to the corresponding household electrical wires.
- Tilslut sort armaturledning til sort (hot) supply wire.
- Tilslut hvid armaturledning til hvid (neutral) forsyningsledning.
- Tilslut grøn or bare copper fixture wire to the grøn or bare copper (ground) supply wire.
Fastgør alle forbindelser med ledningsmøtrikker og elektrisk tape.
- Tætningsforbindelser: Ensure all wire connections are properly insulated and tucked into the junction box.
- Afsluttende samling: Attach the fixture body to the mounting base, ensuring it is securely fastened.
- Gendan strøm: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box.
Betjeningsvejledning
The RAB Lighting LED Bullet Floodlight is designed for straightforward operation.
- Tænd/sluk: The fixture is controlled by the wall switch or external control device connected to its power supply.
- Justering af lyshoveder: The two LED floodlight heads are independently adjustable. Loosen the adjustment screws on each head, position the light beam as desired, and then securely tighten the screws to maintain the position.
- Lysoutput: The fixture provides 1664 lumens of 5000K cool white light.
Opretholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din projektør.
- Rensning: Rengør armaturets yderside regelmæssigt med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler. Sørg for, at strømmen er slukket, før rengøring.
- Inspektion: Annually inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- lysdioder: The integrated LED light sources are designed for long life (100,000 hours) and are not user-replaceable.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet. Løs ledningsforbindelse. Defekt kontakt. | Tjek afbryder/sikring. Kontroller, at alle ledningsforbindelser er sikre (sørg først for, at strømmen er slukket). Test eller udskift kontakten. |
| Lyse flimrer. | Løs ledningsforbindelse. Inkompatibel lysdæmper (hvis relevant). | Kontroller og fastgør alle ledningsforbindelser. This fixture is not specified as dimmable; ensure it's connected to a standard ON/OFF switch. |
| Reduceret lysudbytte. | Snavs eller affald på linsen. | Clean the diffusion lens with a soft, damp klæde. |
If issues persist after troubleshooting, contact RAB Lighting customer support.
Garantioplysninger
This RAB Lighting product comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the official RAB Lighting webwebstedet eller kontakt deres kundeservice. Gem din købsbevis til garantikrav.
Kundesupport
For technical assistance, replacement parts, or warranty inquiries, please contact RAB Lighting directly:
- Webwebsted: www.rablighting.com
- Telefon: Refer to the RAB Lighting webhjemmeside for aktuelle kontaktnumre.
