MiLocks DF-02AQ Electronic Keyless Entry Touchpad Deadbolt Door Lock Instruction Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your MiLocks DF-02AQ Electronic Keyless Entry Touchpad Deadbolt Door Lock. This keyless touchpad deadbolt allows access using a unique passcode and can store up to 6 user codes. The backlit touchpad enhances visibility for nighttime operation. This deadbolt is designed as a direct replacement for traditional deadbolts and is compatible with both left-handed and right-handed doors.

2. Opsætning og installation

Proper installation is crucial for the optimal performance of your MiLocks deadbolt. Please follow these steps carefully.

2.1 Door Preparation and Latch Adjustment

Ensure your door meets the required specifications: door thickness between 1 1/4" and 1 7/8" (up to 2.25" with an extension kit, available from the manufacturer). The adjustable latch supports backset settings of 2 3/8" (60mm) or 2 3/4" (70mm).

Figure 1: Front dimensions of the MiLocks DF-02AQ deadbolt, showing a height of 6 inches and width of 3 3/16 inches.

Figure 2: Side dimensions of the MiLocks DF-02AQ deadbolt, showing a depth of 1 3/8 inches for the front module and 1 3/4 inches for the back module.

2.2 Installation Video Tutorial

For a visual guide on the installation process, including how to adjust the latch and secure the modules, please refer to the official MiLocks installation tutorial video above.

3. Betjeningsvejledning

Your MiLocks deadbolt offers convenient keyless access. Follow these instructions to program and use your lock.

3.1 Programmering af brugerkoder

The lock allows you to add up to 6 unique user passcodes. The backlit touchpad illuminates for easy code entry, especially in low-light conditions.

3.2 Låsning og oplåsning

• At låse: Press the lock button on the touchpad. The deadbolt will extend, and you will hear an audible tone.
• Sådan låses op: Enter your programmed user code followed by the unlock button. The deadbolt will retract, accompanied by an audible tone.

4. Vedligeholdelse

4.1 Udskiftning af batteri

The lock operates on 4 AA batteries (not included). An audible low battery warning will sound when replacement is needed. Always use new, high-quality alkaline batteries for optimal performance.

Figur 3: Bagside view of the MiLocks DF-02AQ deadbolt with the battery cover off, revealing the battery tray.

4.2 Rengøring

Clean the touchpad and exterior surfaces with a soft, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen eller de elektroniske komponenter.

5. Fejlfinding

• Låsen svarer ikke: Check battery levels and replace if necessary. Ensure the internal wiring is securely connected.
• Koden virker ikke: Verify that the correct code is being entered. If issues persist, try clearing all codes and reprogramming them as shown in the programming tutorial video.
• Deadbolt not engaging/retracting: Ensure the latch is properly aligned and installed. Check the orientation of the drive bar during installation.

For yderligere assistance, kontakt venligst kundesupport.

6. Specifikationer

7. Garanti og support

Your MiLocks DF-02AQ deadbolt comes with the following warranties:

• 25 Year Mechanical Warranty
• 1 Year Electrical Warranty
• Lifetime Finish Warranty

For customer service or technical support, please contact MiLocks directly at 1-800-355-0157.