Indledning
Thank you for choosing the Steba BS-1800 Quick Heater. This manual provides essential information for the safe and efficient operation of your new appliance. Please read all instructions carefully before installation and use, and retain this manual for future reference.
The Steba BS-1800 is an energy-saving quick heater designed for bathroom use, featuring a programmable timer, motion sensor, and touch controls for enhanced comfort and efficiency.
Billede: Forside view of the Steba BS-1800 Quick Heater, showcasing its sleek white design and integrated digital display with touch controls.
Vigtige sikkerhedsinstruktioner
Overhold altid grundlæggende sikkerhedsforanstaltninger ved brug af elektriske apparater for at reducere risikoen for brand, elektrisk stød og personskade.
- Læs alle instruktioner, før du bruger denne varmeovn.
- Denne varmeovn er varm, når den er i brug. For at undgå forbrændinger, lad ikke bar hud berøre varme overflader.
- Ekstrem forsigtighed er nødvendig, når et varmeapparat bruges af eller i nærheden af børn eller handicappede, og når varmeapparatet efterlades i drift og uden opsyn.
- Brug ikke varmeapparater med en beskadiget ledning eller stik, eller efter at varmeapparatet ikke fungerer korrekt, er blevet tabt eller beskadiget på nogen måde.
- Do not use outdoors. This heater is intended for indoor, bathroom use only.
- For at afbryde varmeapparatet skal du slukke for knapperne og derefter tage stikket ud af stikkontakten.
- Indsæt eller lad ikke fremmedlegemer trænge ind i ventilations- eller udsugningsåbninger, da dette kan forårsage elektrisk stød eller brand eller beskadige varmeren.
- For at forhindre en mulig brand, må du ikke blokere luftindtag eller udstødning på nogen måde.
- Denne varmelegeme har varme og lysbuer eller gnistgivende dele indeni. Brug den ikke i områder, hvor benzin, maling eller brændbare væsker bruges eller opbevares.
- Brug kun denne varmeovn som beskrevet i denne vejledning. Enhver anden brug, som ikke anbefales af producenten, kan forårsage brand, elektrisk stød eller personskade.
- This appliance is splash-proof (IP24 rated) and suitable for bathroom installation, but must not be installed directly above a bath or shower.
Opsætning og installation
The Steba BS-1800 Quick Heater is designed for wall-mounted installation. Ensure the mounting location is suitable and adheres to local electrical and safety regulations.
Monteringssted
- Choose a wall location that is clear of obstructions and allows for proper air circulation.
- Ensure the wall material can support the weight of the heater (approximately 4.84 pounds).
- Maintain a safe distance from water sources, as per IP24 rating guidelines for bathroom appliances.
Installationstrin
- Carefully unpack the heater and all accessories. Inspect for any damage.
- Using the provided mounting template (if included) or by measuring the heater's dimensions, mark the drilling points on the wall. Refer to the dimensions diagram below.
- Bor huller og isæt passende vægdyvler (medfølger ikke altid, afhængigt af vægtype).
- Fastgør monteringsbeslaget til væggen.
- Hæng forsigtigt varmeapparatet på monteringsbeslaget, og sørg for, at det sidder sikkert fast.
- Connect the power plug to a suitable electrical outlet. Ensure the outlet is properly grounded and rated for the heater's power requirements.
Image: Dimensional diagram of the Steba BS-1800 heater, indicating a height of 49 cm, width of 30 cm, and depth of 10 cm for precise installation planning.
Billede: Bagside view of the Steba BS-1800 Quick Heater, illustrating the design for wall mounting and the location of the air intake vent.
Betjeningsvejledning
The Steba BS-1800 features intuitive touch controls and various modes for optimal heating.
Kontrolpanel overview
The front panel features a digital display and touch-sensitive buttons for power, mode selection, temperature adjustment, and timer settings.
Grundlæggende betjening
- Tænd/sluk: Press the power button (usually indicated by a circle with a vertical line) to turn the heater on or off.
- Temperaturjustering: Use the up/down arrows to set your desired room temperature. The heater features a stepless adjustable room thermostat.
- Valg af tilstand: Press the 'mode' button to cycle through available operating modes.
Avancerede funktioner
- Programmerbar timer: Set the timer for a daily hot bath or specific heating periods. Consult the display for timer programming options.
- Bevægelsessensor: The integrated motion sensor detects presence and can activate an ECO mode, reducing energy consumption when no movement is detected.
- ØKO -tilstand: This energy-saving mode automatically adjusts heating output based on motion detection, optimizing power usage.
- Registrering af åbent vindue: The heater can detect open windows and temporarily suspend heating to prevent energy waste.
- Frostbeskyttelsestilstand: This mode maintains a minimum temperature to prevent freezing in the room.
Image: A graphic highlighting key features of the Steba BS-1800, including motion detection, open window detection, frost protection mode, and a programmable timer for individual weekday scheduling.
Image: The Steba BS-1800 Quick Heater installed in a modern bathroom, demonstrating its function as a towel warmer, providing practical comfort.
Opretholdelse
Regular maintenance ensures the longevity and efficient operation of your Steba BS-1800 Quick Heater.
Rensning
- Tag altid stikket ud af stikkontakten, og lad varmelegemet køle helt af, inden rengøring.
- Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Sørg for, at der ikke trænger vand ind i de indvendige komponenter.
Vedligeholdelse af filter
The heater may contain a washable, removable filter. Regularly check and clean the filter to maintain optimal airflow and heating efficiency.
- Locate the filter access point (typically on the side or rear of the unit).
- Remove the filter and gently clean it with a soft brush or rinse under lukewarm water.
- Lad filteret tørre helt, før du sætter det tilbage i varmelegemet.
Fejlfinding
If you encounter issues with your Steba BS-1800 Quick Heater, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Varmeapparatet tænder ikke. | No power supply; power button not pressed; overheating protection activated. | Check power outlet and plug connection. Press power button. Allow unit to cool down if overheating protection was triggered. |
| Varmeapparatet producerer utilstrækkelig varme. | Temperature setting too low; air intake/exhaust blocked; dirty filter. | Increase temperature setting. Ensure clear airflow around the unit. Clean the air filter. |
| Bevægelsessensoren reagerer ikke. | Sensor obstructed; incorrect mode selected. | Ensure sensor is clear of obstructions. Verify the heater is in a mode that utilizes the motion sensor. |
| Usædvanlige lyde eller lugte. | Støvophobning; problem med interne komponenter. | Unplug immediately. Clean the unit. If problem persists, discontinue use and contact customer support. |
If the problem persists after attempting these solutions, please contact Steba customer support for assistance.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 39.18.00 (BS-1800) |
| Produktdimensioner | 3.94 x 11.81 x 19.29 tommer (10 x 30 x 49 cm) |
| Varens vægt | 4.84 pund |
| Fabrikant | Steba |
| ASIN | B00NEKCDX0 |
| Strømfunktioner | Programmable timer, Motion sensor, ECO mode, Stepless adjustable room thermostat |
| Sikkerhedsfunktioner | Overheating protection, Splash-proof (IP24), Open window detection, Frost protection mode |
| Kontroltype | Touch control with display |
| Installation | Vægmonteret |
Garanti og support
Specific warranty details are not provided in the product information. For warranty claims, technical support, or service inquiries, please contact Steba customer service directly or refer to the warranty card included with your purchase.
Keep your purchase receipt as proof of purchase for any warranty-related matters.
