1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of the Apollo 1500 Swing Gate Motor Package. This system is designed for automating swing gates, offering reliable and efficient performance for various applications.
The Apollo 1500 is recommended for gates up to 16 feet in length and 600 lbs. each. It features a direct drive system that attaches directly to the gate and a rust-proof linear, acme screw drive actuator with self-lubricating gears. It is suitable for residential, farm and ranch, and light commercial applications.
Billede 1.1: Overview of the Apollo 1500 Swing Gate Motor Package components.
2. Pakkens indhold
The Apollo 1500 Swing Gate Motor Package typically includes the following main components:
- Apollo 1500 Swing Gate Motor Actuator
- Control Box (enclosure for electronics)
- Two APL-320N Remote Control Transmitters
- Modtagerenhed
- Monteringshardware og beslag
- Instruktionsmanual (dette dokument)
Note: A 12-volt car type battery (maintenance-free, deep cycle marine battery - 105 amp/hour recommended) is required for operation and is ikke supplied with this package. AC and solar chargers are also not included.
3. Opsætning og installation
Korrekt installation er afgørende for sikker og effektiv drift af din portåbner. Det anbefales, at installationen udføres af en kvalificeret fagmand.
3.1 Tjekliste før installation
- Verify gate dimensions and weight are within specifications (max 16 feet, 600 lbs per gate).
- Ensure the gate swings freely and does not bind.
- Confirm availability of a suitable 12-volt battery (not included).
- Identify desired mounting locations for the actuator and control box.
3.2 Montering af aktuatoren
The direct drive actuator attaches directly to the gate. Follow the detailed diagrams provided in the separate installation guide for precise measurements and bracket placement. Ensure the actuator is level and securely fastened to both the gate and the gate post.
3.3 Wiring the Control Box
Connect the actuator motor wires, battery terminals, and receiver wires to the appropriate terminals within the control box. Refer to the wiring diagram in the separate installation guide. Ensure all connections are secure and insulated to prevent short circuits.
3.4 Initial Power-Up and Limit Setting
Once all components are wired, connect the battery. The system will require initial programming to set the open and close limits of the gate. Follow the specific instructions in the installation guide for limit switch adjustment and remote control pairing.
4. Betjeningsvejledning
4.1 Betjening af fjernbetjening
The APL-320N remote control transmitters are pre-programmed or can be easily paired with the receiver unit. Pressing the designated button on the remote will initiate the gate's movement (open or close). A second press will typically stop the gate, and a third press will reverse its direction.
4.2 Push-to-Open or Pull-to-Open Applications
The Apollo 1500 system can be configured for both push-to-open and pull-to-open gate applications. The specific setup for these configurations is detailed in the installation guide and involves adjusting the actuator mounting and potentially the control board settings.
4.3 Sikkerhedsfunktioner
The system is equipped with safety features to prevent injury or damage. Ensure all safety sensors (if installed) are functioning correctly. Do not attempt to force the gate manually when the opener is engaged.
5. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your Apollo 1500 gate opener.
5.1 Actuator and Mechanical Components
- The actuator features self-lubricating gears, minimizing the need for external lubrication.
- Periodically inspect the actuator arm, mounting brackets, and gate hinges for wear, damage, or loose fasteners. Tighten as necessary.
- Keep the area around the gate and actuator clear of debris, vegetation, or obstructions.
5.2 Pleje af batterier
- Ensure the 12-volt battery is kept charged. If using a solar charger or AC charger (not included), verify its proper operation.
- Check battery terminals for corrosion and clean if necessary.
- For optimal battery life, avoid deep discharges.
5.3 Generelt eftersyn
Annually inspect all wiring for signs of wear or damage. Ensure the control box is sealed and protected from moisture and pests.
6. Fejlfinding
This section addresses common issues you might encounter with your Apollo 1500 gate opener. For more complex problems, consult a qualified technician.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Gaten reagerer ikke på fjernbetjeningen. | Dead remote battery; remote not paired; power issue to receiver. | Replace remote battery; re-pair remote (refer to installation guide); check power to control box. |
| Gate opens partially or stops unexpectedly. | Obstruction; low battery voltage; limit switch issue. | Clear obstructions; check and charge battery; re-adjust limit switches. |
| Gate makes unusual noises. | Worn hinges; loose mounting hardware; internal actuator issue. | Lubricate hinges; tighten all fasteners; inspect actuator for damage. |
| Gate reverses direction unexpectedly. | Safety sensor triggered; obstruction; force sensitivity setting. | Check safety sensors for blockage; clear gate path; adjust force settings (refer to installation guide). |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Model | Apollo 1500 |
| Recommended Gate Length | Up to 16 feet per gate |
| Recommended Gate Weight | Up to 600 lbs per gate |
| Aktuator type | Rust Proof linear, acme screw drive; self-lubricating gears |
| Ansøgninger | Residential, Farm and Ranch, Light Commercial |
| Battery Requirements (Not Supplied) | 12 volt car type battery; maintenance-free, deep cycle marine battery - 105 amp/hour recommended |
| Varens vægt | 130 pund |
| Fabrikant | Apollo |
| ASIN | B00MMMFXG0 |
| Dato først tilgængelig | 13. december 2006 |
8. Garanti og support
Specific warranty details for the Apollo 1500 Swing Gate Motor Package are typically provided with the product documentation at the time of purchase. Please refer to the warranty card or contact the manufacturer directly for information regarding warranty coverage, terms, and conditions.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Apollo customer service. Contact information can usually be found on the manufacturer's official webwebstedet eller på produktemballagen.
