Klipsch R-12SW 12-tommer aktiv subwoofer brugsanvisning

Indledning

The Klipsch R-12SW is a powerful 12-inch front-firing subwoofer designed to enhance your audio experience with robust, deep bass. Featuring a copper-spun woofer and a 400W all-digital amplifier, this subwoofer delivers impressive performance for both movies and music. This manual will guide you through the setup, operation, and maintenance of your new subwoofer to ensure optimal performance and longevity.

Produkt overview

Nøglefunktioner

• Powerful 12" copper-spun front-firing woofer for deep bass.
• All-digital amplifier delivering 400 watts of dynamic power.
• Optimized for both music and movies.
• Brushed black polymer veneer cabinet with satin painted plinth for a sleek aesthetic.
• Integrated low pass crossover and phase control for sound optimization.
• Line/LFE inputs for broad compatibility with most receivers.

Figur 1: Forside view of the Klipsch R-12SW Subwoofer, showcasing its distinctive copper-spun driver.

Opsætning

Udpakning

Carefully remove your Klipsch R-12SW subwoofer from its packaging. Ensure all components are present and undamaged.

• Klipsch R-12SW Subwoofer
• Strømkabel
• Brugervejledning (dette dokument)

Placering

The placement of your subwoofer significantly impacts its sound performance. Experiment with different locations to find the best bass response in your listening environment. Common placements include:

• Hjørneplacering: Placing the subwoofer in a corner can maximize its output and provide a more impactful bass.
• Front of the Room: Positioning the subwoofer near your front speakers can create a more seamless soundstage.
• Mid-Wall Placement: Placing it along a wall, away from corners, can offer a more balanced bass response.

Figur 2: Eksample placement of the Klipsch R-12SW Subwoofer in a home environment.

Forbindelser

Connect your subwoofer to your audio receiver or amplifier using the appropriate inputs:

• LFE-input: For receivers with a dedicated Subwoofer/LFE output, connect a single RCA cable from the receiver's LFE output to the subwoofer's LFE input. This is the recommended connection for most home theater systems.
• Line Level Inputs (Left/Right): If your receiver does not have an LFE output, connect RCA cables from your receiver's stereo pre-out (left and right) to the subwoofer's Line Level inputs.

Once connected, plug the subwoofer's power cable into a wall outlet.

Betjeningskontrol

The Klipsch R-12SW features several controls on its rear panel to fine-tune its performance to your listening preferences and room acoustics.

Betjening på bagpanel

• Gain (Volume) Control: Adjusts the output level of the subwoofer. Start with a low setting and gradually increase until the bass blends seamlessly with your main speakers without overpowering them.
• Low Pass Crossover Control: Determines the highest frequency the subwoofer will reproduce. Adjust this to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz, but you may need to adjust it based on your speaker size and room.
• Fasekontrol (0°/180°): This switch helps to match the subwoofer's output phase with your main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass.
• Power Mode (On/Auto/Off):
  • PÅ: Subwooferen forbliver konstant tændt.
  • BIL: The subwoofer automatically turns on when it detects an audio signal and enters standby mode after a period of inactivity.
  • OFF: Subwooferen er slukket.

Opretholdelse

To ensure the longevity and optimal performance of your Klipsch R-12SW subwoofer, follow these simple maintenance guidelines:

• Rensning: Use a dry, soft cloth to clean the cabinet. Avoid using abrasive cleaners, solvents, or strong detergents.
• Placeringsmiljø: Keep the subwoofer away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit.
• Støvning: Regularly dust the woofer cone and cabinet to prevent buildup that could affect sound quality.

Fejlfinding

If you encounter any issues with your Klipsch R-12SW subwoofer, refer to the following common troubleshooting steps:

• Ingen lyd:
  • Ensure the subwoofer is plugged into a working power outlet and the power switch is set to ON or AUTO.
  • Verify that the audio cables are securely connected to both the subwoofer and your receiver/amplivligere.
  • Check your receiver's settings to ensure the subwoofer output is enabled and the volume is not muted.
• Forvrænget eller buldrende lyd:
  • Adjust the Gain (Volume) control on the subwoofer to a lower setting.
  • Adjust the Low Pass Crossover control. A lower setting may reduce boominess.
  • Experiment with the Phase control (0°/180°).
  • Try repositioning the subwoofer in your room. Moving it away from corners can sometimes help.
• Brummende støj:
  • Sørg for, at alle lydkabler er korrekt afskærmede og ikke løber parallelt med strømkabler.
  • Prøv at tilslutte subwooferen til en anden stikkontakt.
  • If the hum persists, a ground loop isolator may be necessary.

Specifikationer

Garantioplysninger

Your Klipsch R-12SW Subwoofer comes with a Limited Warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration of coverage. Keep your proof of purchase for any warranty claims.

Kundesupport

For further assistance, technical support, or service inquiries regarding your Klipsch R-12SW Subwoofer, please visit the official Klipsch website or contact their customer service department. Contact details can typically be found in your product documentation or on the Klipsch webwebsted.