1. Introduktion
This manual provides essential information for the safe and efficient use of your Briggs & Stratton 1450 Series Horizontal OHV Engine, Model 19N132-0055-F1. This 305cc single-cylinder engine is designed to provide reliable power for various equipment applications. Key features include a dual clean air filtration system, a recoil starter, and a maintenance-free Magnetron electronic ignition system. The engine also incorporates a Dura-Bore cast iron cylinder sleeve for enhanced durability, an installed muffler, and a low-oil sensor for protection.
Figur 1: Briggs & Stratton 1450 Series Horizontal OHV Engine. This image displays the engine with its black air filter housing on the left, the fuel tank cap on top, the red engine stop switch, and the recoil starter assembly with its protective grille. Control levers for choke and throttle are also visible on the side. The engine features a robust black and grey metallic construction.
2. Sikkerhedsoplysninger
Always prioritize safety when operating and maintaining the engine. Failure to follow safety instructions can result in serious injury or property damage.
- Udstødningsgasser: Engine exhaust contains carbon monoxide, a colorless, odorless, and deadly gas. Operate the engine only in well-ventilated areas.
- Varme overflader: Motorkomponenter, især lyddæmperen, bliver meget varme under drift og forbliver varme i et stykke tid efter slukning. Undgå kontakt for at forhindre forbrændinger.
- Bevægelige dele: Keep hands, feet, hair, and clothing away from moving parts such as the flywheel, fan, and recoil starter to prevent entanglement and injury.
- Brændstofhåndtering: Gasoline is highly flammable. Store fuel in approved containers, in a well-ventilated area, away from ignition sources. Refuel outdoors with the engine off and cool. Do not smoke while refueling.
- Elektriske farer: Do not touch spark plug wires or other electrical components while the engine is running or being started.
- Øjenbeskyttelse: Brug altid passende øjenbeskyttelse, når du arbejder på eller i nærheden af motoren.
3. Opsætning og installation
Proper setup is crucial for engine performance and longevity.
- Montering: Monter motoren sikkert på en stabil, plan overflade med passende beslag. Sørg for tilstrækkelig plads til køling og vedligeholdelse.
- Oliepåfyldning: Before starting, fill the engine crankcase with the recommended type and amount of engine oil. Refer to the engine's oil capacity specifications. The engine is equipped with a low-oil sensor for protection.
- Fuel Fill: Fill the fuel tank with fresh, clean gasoline. Do not overfill. Ensure the fuel cap is securely tightened.
- Akselforbindelse: The engine features a 1-inch diameter by 2.765-inch length shaft. Ensure proper alignment and secure connection to the driven equipment.
- Elektriske forbindelser: If applicable, connect any necessary electrical wiring according to the equipment manufacturer's instructions.
4. Betjeningsvejledning
Follow these steps for starting and stopping the engine.
4.1 Start af motoren
- Brændstofventil: Åbn brændstofventilen (hvis monteret).
- Kvæler: Move the choke lever to the 'CHOKE' position for a cold engine. For a warm engine, the choke may not be necessary.
- Gashåndtag: Flyt gashåndtaget til 'HURTIG'-positionen.
- Rekylstarter: Grasp the recoil starter handle firmly and pull slowly until resistance is felt, then pull rapidly with a full arm stroke. Allow the rope to rewind slowly. Repeat until the engine starts.
- Chokerjustering: As the engine warms up, gradually move the choke lever to the 'RUN' position.
4.2 Standsning af motoren
- Gashåndtag: Flyt gashåndtaget til 'LANGSOM' eller 'TOMGANG'.
- Engine Stop Switch: Move the engine stop switch to the 'OFF' position.
- Brændstofventil: Close the fuel valve (if equipped) for storage or extended periods of non-use.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger motorens levetid.
- Tjek motorolie: Check the engine oil level before each use. Add oil as needed to the full mark.
- Skift motorolie: Skift motorolien efter de første 5 timers drift, derefter hver 50. time eller årligt, alt efter hvad der kommer først.
- Luftfilter: Inspect the dual clean air filtration system regularly. Clean or replace the air filter elements as necessary, especially in dusty conditions.
- Tændrør: Inspect and clean the spark plug annually or every 100 hours. Replace if electrodes are worn or pitted. Ensure correct gap.
- Brændstofsystem: Periodically check fuel lines and connections for leaks or damage. Clean the fuel tank and fuel filter as needed.
- Generel rengøring: Keep the engine clean, especially cooling fins, to prevent overheating.
6. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motoren vil ikke starte | No fuel; Stale fuel; Incorrect choke setting; Low oil level; Fouled spark plug | Add fresh fuel; Adjust choke; Check oil level and add if low; Clean/replace spark plug |
| Motoren kører ujævnt | Dirty air filter; Stale fuel; Fouled spark plug; Carburetor issues | Clean/replace air filter; Drain and refill with fresh fuel; Clean/replace spark plug; Consult service center |
| Motor mangler kraft | Dirty air filter; Incorrect throttle setting; Overloaded equipment | Clean/replace air filter; Adjust throttle; Reduce load on equipment |
| Motoren overophedes | Blocked cooling fins; Low oil level; Overloaded equipment | Clean cooling fins; Check oil level; Reduce load |
7. Specifikationer
Key technical specifications for the Briggs & Stratton 1450 Series Horizontal OHV Engine.
| Specifikation | Værdi |
|---|---|
| Mærke | Briggs & Stratton |
| Modelnummer | 19N132-0055-F1 |
| Engine Series | 1450 Series Horizontal OHV |
| Motorens slagvolumen | 305cc |
| Brutto drejningsmoment | 14.50 ft-lbs (per SAE J1940) |
| Skaft dimensioner | 1 inch diameter x 2.765 inches length |
| Hastighed | 3750 RPM |
| Hestekræfter | 10 hestekræfter |
| Voltage | 12 volt (DC) |
| Materiale | Metal |
| Varens vægt | 67 pund |
| Produktmål (L x B x H) | 21.75 x 19.5 x 19.5 tommer |
| UPC | 047282038017 |
8. Garanti og support
This Briggs & Stratton engine comes with a manufacturer's limited warranty.
- Forbrugerbrug: 2 års begrænset garanti.
- Kommerciel brug: 1 års begrænset garanti.
For detailed warranty terms, service, or technical support, please visit the official Briggs & Stratton webwebstedet eller kontakt deres kundeserviceafdeling. Oplys altid din motors model- og serienummer, når du søger support.
Du kan finde mere information og supportressourcer på www.briggsandstratton.com.
