Indledning
This user manual provides detailed instructions for the installation, operation, and maintenance of your Lucci LEDlux Siri 18W 230V Chrome Ceiling Spot. Please read this manual thoroughly before installation and use to ensure safe and efficient operation. This product features a modern design with three large round LED spots, providing warm white light at 3000K and is dimmable.
Figur 1: Forside view of the Lucci LEDlux Siri 18W 230V Chrome Ceiling Spot, showcasing its three adjustable LED light heads on a linear bar.
Sikkerhedsoplysninger
- Elektrisk sikkerhed: Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the fixture. Installation should be performed by a qualified electrician in accordance with all local electrical codes.
- Voltage: This product operates on 230 Volts. Ensure your electrical supply matches this requirement.
- Kun indendørs brug: This fixture is designed for indoor use in dry locations. Do not expose to water or excessive moisture.
- Håndtering: Handle the fixture with care. Do not drop or subject it to strong impacts.
- Varme: While LED lights produce less heat than traditional bulbs, ensure adequate ventilation around the fixture. Do not cover the fixture with flammable materials.
- Rensning: Refer to the Maintenance section for proper cleaning procedures. Do not use abrasive cleaners.
Pakkens indhold
Carefully unpack the box and ensure all items listed below are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer support immediately.
- 1 x Lucci LEDlux Siri Ceiling Spot Fixture (with 3 integrated LED spots)
- Mounting Hardware (screws, wall anchors, etc.)
- Instruktionsmanual (dette dokument)
Opsætning og installation
Vigtig: Installation must be carried out by a qualified electrician. Ensure power is disconnected at the main circuit breaker before beginning installation.
- Forbered installationsområdet: Turn off the power to the circuit at the main electrical panel. Use a voltage testeren for at bekræfte, at strømmen er slukket.
- Monter beslaget: Attach the mounting bracket (if separate) to the ceiling junction box using the provided screws. Ensure it is securely fastened.
- Tilslut armaturet: Connect the fixture's wires to the corresponding house wires (live to live, neutral to neutral, ground to ground) using wire nuts. Ensure all connections are secure and properly insulated.
- Fastgør armaturet: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws or fasteners. Ensure the fixture is flush against the ceiling.
- Adjust Spots: Once installed, the individual spot heads can be adjusted to direct light as desired.
- Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved hovedafbryderen.
Figure 2: The Lucci LEDlux Siri Ceiling Spot installed, demonstrating its appearance and light distribution on a ceiling.
Betjeningsvejledning
- Tænd/sluk: The fixture is controlled by a standard wall switch connected to the circuit. Flip the switch to turn the light on or off.
- Dæmpbar funktion: This fixture is dimmable. If connected to a compatible dimmer switch (sold separately), you can adjust the light intensity to your preference. Ensure the dimmer switch is suitable for LED lighting.
- Adjusting Spot Heads: Each of the three spot heads can be manually rotated and tilted to direct the light beam to specific areas of your room.
Opretholdelse
- Rensning: To clean the fixture, first ensure the power is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe down the chrome finish. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- LED-levetid: The integrated LED lights are designed for long life and are not user-replaceable. If the LEDs fail, the entire fixture may need replacement.
- Regelmæssig kontrol: Kontrollér regelmæssigt alle forbindelser og monteringsudstyr for at sikre, at de forbliver fastgjorte.
For more information on cleaning light bulbs, refer to general guidelines on cleaning lighting fixtures.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet; løse ledninger; defekt vægafbryder. | Check circuit breaker. Ensure all wire connections are secure. Test the wall switch. If issues persist, consult a qualified electrician. |
| Lyset flimrer eller dæmpes uventet. | Inkompatibel lysdæmper; løse ledninger; lydstyrketage udsving. | Ensure dimmer switch is compatible with LED lighting. Check wiring connections. Consult an electrician if voltagder er mistanke om e-problemer. |
| Fixture makes unusual noise. | Loose components; electrical issue. | Turn off power immediately. Check for loose parts. If noise persists or is electrical in nature, contact a qualified electrician. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Lucci LEDlux |
| Modelnummer | BI1513301 |
| Produktmål (L x B x H) | 69.5 x 14 x 20 cm (27.36 x 5.51 x 7.87 tommer) |
| Varens vægt | 1.87 kilo |
| Farve | Chrome |
| Stil | 3 large round spots |
| Antal lyskilder | 3 (integreret LED) |
| Strømforbrug | 18 watt |
| Voltage | 230 volt |
| Lysstrøm | 900 lm |
| Farvetemperatur | 3000K (varm hvid) |
| Color Rendering Index (CRI) | 80 |
| Energieffektivitetsmærke | A |
| Dæmpbar | Ja |
| Batterier påkrævet | Ingen |
| IP-vurdering | Not Applicable (for indoor dry locations) |
Garanti og support
Specific warranty information for the Lucci LEDlux Siri Ceiling Spot is not provided in the product details. For warranty claims, technical support, or inquiries about spare parts, please contact Lucci LEDlux customer service directly or the retailer from whom you purchased the product.
When contacting support, please have your model number (BI1513301) and purchase date available.
