Whirlpool 2166108 Køleskabsrulle Brugsanvisning

1. Produktet er slutview

The Whirlpool 2166108 Cab Roller is a genuine replacement part designed for use in various Whirlpool and compatible refrigerator models. This component facilitates the movement of the appliance, typically located at the base of the refrigerator, allowing for easier positioning and access for cleaning or maintenance.

Billede 1.1: The Whirlpool 2166108 Refrigerator Cab Roller. This image displays the roller assembly, consisting of a plastic wheel mounted within a metal bracket, designed for appliance mobility.

Ensuring the proper function of these rollers is crucial for the stability and mobility of your refrigerator, preventing potential damage to flooring and simplifying appliance relocation.

2. Opsætning og installation

Installation of the Whirlpool 2166108 Cab Roller requires careful attention and may involve lifting and securing the refrigerator. It is recommended to have assistance during this process due to the weight and size of the appliance.

2.1 Sikkerhedsforanstaltninger

• Always disconnect the refrigerator from its power source before beginning any installation or maintenance.
• Ensure the refrigerator is completely empty to reduce weight.
• Use appropriate lifting equipment or have sufficient assistance to safely raise and support the appliance.
• Block the refrigerator securely in its raised position to prevent accidental movement or collapse.
• Bær passende personlige værnemidler, såsom handsker og sikkerhedsbriller.

2.2 Generelle installationstrin

While specific steps may vary by refrigerator model, the general process involves:

1. Klargør apparatet: Disconnect power and empty the refrigerator.
2. Raise and Secure: Carefully raise the front or side of the refrigerator to access the bottom frame. Securely block the appliance in this elevated position.
3. Access the Roller Assembly: The roller is typically held in place by a pin within the bottom frame. Accessing this pin may require dropping the bottom frame or pan of the refrigerator.
4. Fjern den gamle rulle: Locate and remove the retaining pin or fasteners holding the old roller. This step can be challenging due to limited space and the design of the pin mechanism.
5. Installer ny rulle: Position the new Whirlpool 2166108 Cab Roller into the designated slot and secure it with the retaining pin or fasteners. Ensure it is firmly seated.
6. Lower Appliance: Carefully remove the blocks and lower the refrigerator back to its resting position.
7. Test mobilitet: Gently push the refrigerator to confirm the new roller allows for smooth movement.

For detailed, model-specific instructions, consult your refrigerator's service manual or search for instructional videos relevant to your specific appliance model. Professional assistance may be beneficial if you encounter difficulties.

3. Driftsprincipper

The Whirlpool 2166108 Cab Roller functions as a passive mobility component. Once installed, it allows the refrigerator to be moved with reduced effort, facilitating cleaning behind the appliance or repositioning. There are no active operational controls associated with this part.

4. Vedligeholdelse

Regular maintenance for the cab roller is minimal but can extend its lifespan and ensure smooth operation:

• Periodisk eftersyn: Annually, or if you notice difficulty moving the refrigerator, inspect the rollers for signs of wear, damage, or accumulation of debris.
• Rensning: If accessible, clean any dust, lint, or other obstructions from around the roller wheel and axle. Use a soft brush or cloth.
• Smøring: If the roller appears stiff or noisy, a small amount of silicone-based lubricant can be applied to the axle, avoiding contact with the wheel's rolling surface.

Always ensure the refrigerator is disconnected from power before performing any maintenance that requires accessing the rollers.

5. Fejlfinding

If you encounter issues after installing or while using the Whirlpool 2166108 Cab Roller, consider the following:

• Difficulty Moving Refrigerator:
  • Ensure the roller is correctly seated and not obstructed by debris.
  • Verify that the retaining pin is fully engaged and not causing friction.
  • Check if other rollers (if present) are also functioning correctly.
• Refrigerator Not Level:
  • Confirm that all rollers are installed at the correct height and are not damaged.
  • Adjust any leveling feet on the refrigerator, if applicable, to achieve proper balance.
• Installation Challenges (Pin Removal/Insertion):
  • The retaining pin can be difficult to access and manipulate. Refer to model-specific service manuals or online video tutorials for visual guidance.
  • Consider using specialized tools or seeking professional appliance repair assistance if the pin cannot be removed or inserted safely.

6. Specifikationer

7. Garanti og support

Specific warranty information for the Whirlpool 2166108 Cab Roller is not available in the provided product data. For details regarding warranty coverage, please refer to the documentation included with your purchase or contact Whirlpool customer support directly.

For yderligere assistance, teknisk support eller for at forespørge om service, besøg venligst den officielle Whirlpool-side. website or contact their customer service department. You may find helpful resources and contact information via the Whirlpool-butik på Amazon.

8. Yderligere ressourcer

Billede 8.1: Whirlpool Corporation Factory Certified Parts & Accessories. This banner indicates the availability of genuine parts and accessories from Whirlpool.

No official product videos from the seller were found in the provided data for this specific item. For general appliance repair guidance or visual aids, external resources such as online video platforms may offer relevant content, but always verify the information's accuracy and applicability to your specific model.