1. Produktet er slutview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.
Figur 1: Forside view of the Progress Lighting P6064-31 Wall Lantern.
2. Sikkerhedsoplysninger
ADVARSEL: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Overskrid ikke det maksimale wattage specificeret for pæren.
- Håndter glaskomponenter forsigtigt for at forhindre brud.
- Hold brandfarlige materialer væk fra lysarmaturet.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Wall Lantern Fixture (P6064-31)
- Etched Glass Shade
- Monteringshardwaresæt
- Installationsark
4. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | P6064-31 |
| Mærke | Fremskridtsbelysning |
| Finish Type | Finished (Black) |
| Produktdimensioner | 16.13 cm L x 9.25 cm B x 6.13 cm H |
| Varens vægt | 4.63 pund |
| Monteringstype | Fremspringende |
| Vandmodstandsniveau | Vandtæt |
| Lyskilde Wattage | 100 Watt (Max) |
| Voltage | 120 volt |
| Maksimal lysudbytte | 1600 lumen |
| Lyskildetype | Incandescent (Medium Base) |
| Materiale | Aluminium |
Figure 2: Product dimensions for the P6064-31 Wall Lantern.
5. Installationsvejledning
5.1 Forinstallation
- Sluk for strømmen ved afbryderen eller sikringsboksen.
- Pak forsigtigt armaturet ud og inspicer det for eventuelle skader.
- Sørg for, at alle dele, der er anført i afsnit 3, er til stede.
5.2 Sizing and Placement Guidance
Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.
Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.
- Armaturstørrelse: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
- Monteringshøjde: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
- Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
- Garage Doors: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Figur 3: Eksample of wall lantern placement for an entryway.
Figur 4: Eksample of wall lantern placement for a garage.
5.3 Ledningsføring og montering
- Fastgør monteringsbeslaget til samledåsen ved hjælp af de medfølgende skruer.
- Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
- Stik forsigtigt alle ledninger ind i samledåsen.
- Align the fixture with the mounting bracket and secure it with the provided screws or nuts.
5.4 Montering af pære
- Insert one medium base incandescent bulb (not included) into the socket.
- Overskrid ikke det maksimale wattage på 100 watt.
- Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.
6. Betjeningsvejledning
Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.
7. Vedligeholdelse
To maintain the appearance and functionality of your fixture:
- Rensning: Turn off power before cleaning. Wipe the fixture with a soft, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da de kan beskadige overfladen eller glasset.
- Udskiftning af pære: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.
8. Fejlfinding
If your fixture is not operating correctly, refer to the following common issues:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke | Ingen strøm til armaturet | Check circuit breaker, wall switch, and wiring connections. |
| Pæren er brændt ud | Udskift pæren. | Ensure bulb is screwed in tightly. |
| Flimrende lys | Løs pære eller ledningsforbindelse | Tighten bulb. Check wiring connections (with power off). |
| Fixture is dim | Forkert pære wattage | Sørg for pære, hvadtage is appropriate and not too low. |
9. Garanti og support
Denne Progress Lighting-armatur er dækket af en 1 års begrænset garantiDenne garanti garanterer din fulde tilfredshed med dit køb og inkluderer professionel kundeservice efter salget.
For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting webwebsted.
