Brugsanvisning til Liebherr-køleskabsvandfilter

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your Liebherr Refrigerator Water Filter. This filter is an Original OEM Filter, NSF Certified, and designed to provide crystal clear water by improving the taste and freshness of water and ice in your refrigerator.

2. Sikkerhedsoplysninger

Please read and understand all safety warnings and cautions before installing or using the water filter.

• ADVARSEL: To reduce the risk associated with the ingestion of contaminants, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
• FORSIGTIGHED: To reduce the risk of property damage due to water leakage, you MUST read and follow installation and use instructions before installation and use of this product.
• The filter must be replaced at least every 6 months or if a noticeable reduction in flow rate occurs.
• Ensure the filter is fully sealed before use.

3. Pakkens indhold

Din pakke skal indeholde følgende vare:

• 1 x Liebherr Refrigerator Water Filter (Model 744000200)

Image: The Liebherr Refrigerator Water Filter shown both in its retail packaging and as a standalone unit.

4. Setup: Filter Installation

Follow these steps to install your new water filter:

1. Forbered området: Place a towel underneath the filter housing inside your refrigerator to catch any residual water during the replacement process.
2. Fjern gammelt filter: Locate the existing water filter inside your refrigerator. Gently twist the old filter to the left (counter-clockwise) to unlock and remove it from the housing. A small amount of water may drip out.
3. Forbered nyt filter: Ensure the new filter is fully sealed and remove any protective caps.
4. Installer nyt filter: Insert the new filter into the housing. Push it in firmly and then twist it to the right (clockwise) until it hooks and is securely in place. Make sure it twists all the way and does not turn any further.

Image: The Liebherr Refrigerator Water Filter, unwrapped and ready for installation.

5. Betjeningsvejledning

Once installed, the water filter will immediately begin filtering water as it passes through to your refrigerator's water dispenser and ice maker. The filter is designed to improve the taste and freshness of your water and ice by reducing impurities.

6. Vedligeholdelse

Regular maintenance of your water filter is crucial for optimal performance and water quality.

Tidsplan for udskiftning af filter

The water filter should be replaced at least every 6 months. However, if you notice a significant reduction in water flow or a change in water taste, it may be necessary to replace the filter sooner.

7. Fejlfinding

Resetting the Filter Warning Light

After replacing the water filter, you will need to reset the filter warning indicator on your Liebherr refrigerator's control panel. This light typically appears as small water droplets.

1. Adgangsindstillinger: On the refrigerator's control panel, press and hold the "SuperFrost" button for approximately 5 seconds until the display changes to show settings.
2. Navigate to Filter Setting: Use the "Down" arrow button to scroll through the menu options until you reach the filter setting, which is typically indicated by an "F" or a water droplet icon.
3. Nulstil filter: Once the filter setting is displayed, press the "SuperFrost" button again. The display should change to "F0" and then back to "F", indicating the filter warning has been reset.
4. Afslut indstillinger: Press the "On/Off" button to exit the settings menu and return to the normal display. The filter warning light should now be off.

8. Specifikationer

9. Garanti og support

For warranty information and customer support, please refer to the documentation provided with your Liebherr refrigerator or visit the official Liebherr webwebsted.