Einhell TC-JS 80 600W Stiksav Brugsanvisning

1. Introduktion

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TC-JS 80 600W Jigsaw. Please read this manual thoroughly before using the tool and keep it for future reference.

The Einhell TC-JS 80 is a powerful jigsaw designed for various cutting tasks. It features an adjustable 4-position pendulum function and electronic speed control for adapting to different materials. Its design includes dust extraction capability and a rotating saw shoe for miter cuts up to 45°.

2. Sikkerhedsinstruktioner

Generelle sikkerhedsadvarsler for elværktøj:

• Always wear eye protection and hearing protection when operating the jigsaw.
• Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv.
• Hold børn og omkringstående væk, mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.
• Ensure the power cord is not damaged and is kept away from heat, oil, sharp edges, or moving parts.
• Tag altid stikket ud af værktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer det.
• Fastgør emnet. Brug clampeller en skruestik til at holde emnet fast.
• Gå ikke for langt. Hold hele tiden ordentligt fodfæste og balance.
• Brug det korrekte værktøj til din opgave. Brug ikke for meget kraft.
• Vedligehold værktøj med omhu. Hold skæreværktøj skarpt og rent.
• Tjek for fejljustering eller fastklæbning af bevægelige dele, brud på dele og enhver anden tilstand, der kan påvirke værktøjets funktion.

Specific Jigsaw Safety Warnings:

• Hold værktøjet i de isolerede gribeflader, når du udfører en operation, hvor skæretilbehøret kan komme i kontakt med skjulte ledninger eller sin egen ledning.
• Brug clamps eller en anden praktisk måde at sikre og understøtte emnet til en stabil platform.
• Ensure the blade is sharp and suitable for the material being cut.
• Do not touch the blade immediately after use, as it may be hot.

3. Produktet er slutview og komponenter

Familiarize yourself with the various parts of your Einhell TC-JS 80 Jigsaw.

Figur 3.1: Samlet set view of the Einhell TC-JS 80 Jigsaw.

This image shows the complete jigsaw unit, highlighting its compact design and the attached saw blade with a parallel guide for precise cuts.

• Håndtag: Ergonomisk designet for et komfortabelt greb.
• Tænd/sluk-knap: Located on the handle for easy access.
• Hastighedsknap: Allows adjustment of cutting speed.
• Pendulum Function Selector: Adjusts the blade's orbital action for faster or finer cuts.
• Savblad Clamp: Secures the saw blade in place.
• Base Plate (Saw Shoe): Supports the tool on the workpiece and can be angled for miter cuts.
• Støvudsugningsport: For connecting a dust extraction system.
• Parallelføring: Assists in making straight cuts parallel to an edge.

Figur 3.2: Detalje af bladet clamping mekanisme.

This image provides a closer look at the area where the saw blade is inserted and secured, including the blade guide roller.

Figure 3.3: Ergonomic handle design.

This image highlights the comfortable, non-slip grip of the jigsaw's handle, designed for user comfort during operation.

Figure 3.4: Speed control dial.

This image shows the dial used to adjust the electronic speed control, allowing the user to select the appropriate cutting speed for different materials.

4. Opsætning

4.1. Montering af savklingen

1. Sørg for, at stiksav er frakoblet strømkilden.
2. Locate the hex lock/Allen key for the blade clamp.
3. Loosen the screw on the blade clamp ved hjælp af unbrakonøglen.
4. Sæt savklingen ind i klingen clamp med tænderne fremad.
5. Ensure the back of the blade fits into the guide roller.
6. Tighten the screw firmly to secure the blade. Do not overtighten.

4.2. Adjusting the Base Plate for Miter Cuts

The base plate can be angled up to 45° for miter cuts.

1. Unplug the jigsaw.
2. Loosen the screws that secure the base plate to the main body of the jigsaw.
3. Tilt the base plate to the desired angle (up to 45° left or right). Use a protractor for accuracy if needed.
4. Tighten the base plate screws securely.

Figure 4.1: Flexible cuts up to 45 degrees.

This graphic demonstrates the capability of the jigsaw to perform angled cuts by tilting its base plate up to 45 degrees in either direction.

5. Betjeningsvejledning

5.1. Tænd/sluk

• To turn on the jigsaw, press the On/Off switch.
• To turn off, release the On/Off switch.

5.2. Justering af hastighed

The electronic speed controller allows you to adjust the cutting speed based on the material and desired finish.

• Rotate the speed control dial (Figure 3.4) to increase or decrease the blade strokes per minute.
• Lower speeds are generally used for harder materials or for more precise cuts.
• Higher speeds are suitable for softer materials and faster cutting.

Figure 5.1: Speed vs. Exact cutting.

This graphic illustrates the difference between high-speed cutting (for quick material removal) and exact cutting (for precision), which can be controlled by the electronic speed setting.

5.3. Using the Pendulum Function

The 4-position pendulum function controls the orbital action of the blade, affecting cutting speed and finish.

• Position 0 (No Pendulum): For fine cuts, cutting thin materials, or cutting metal. The blade moves straight up and down.
• Positions I, II, III (Increasing Pendulum): For faster cutting in wood and other soft materials. The blade moves in an elliptical motion, clearing chips more aggressively.
• Adjust the pendulum selector lever to the desired position.

Figure 5.2: Pendulum function settings.

This graphic visually explains how the pendulum function alters the blade's movement, from a straight up-and-down motion to an orbital motion, for varying cutting speeds and finishes.

5.4. Støvudsugning

For a cleaner work environment, connect a dust extraction system to the dust extraction port.

• Attach a suitable vacuum cleaner hose to the dust extraction port at the rear of the jigsaw.
• Ensure the connection is secure before operating the tool.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din stiksavs levetid og optimal ydeevne.

6.1. Rensning

• Tag altid stikket ud af stikkontakten før rengøring.
• Rengør ventilationsåbningerne regelmæssigt for at forhindre overophedning.
• Remove dust and debris from the blade area and base plate after each use.
• Use a soft brush or compressed air for cleaning. Do not use solvents or abrasive cleaners.

6.2. Udskiftning af kniv

Replace dull or damaged saw blades promptly to ensure efficient and safe cutting. Refer to Section 4.1 for blade installation steps.

6.3. Opbevaring

• Store the jigsaw in a dry, secure place out of reach of children.
• Sørg for, at netledningen er pænt viklet og ikke bøjet.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Einhell customer service directly. Keep your proof of purchase for warranty claims.

Varighed af tilgængelighed af reservedele i EU: 1 år