Prime TNOREM02 udendørs fjernbetjening med 2 stikkontakter og trådløs sender brugermanual

Indledning

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Sikkerhedsoplysninger

Læs og forstå alle sikkerhedsinstruktioner, før du bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.

• Kun udendørs brug: This product is designed for outdoor use. Ensure all connections are protected from direct exposure to water.
• Jording: The receiver unit features two 3-prong grounded outlets and a grounded plug. Always connect to a properly grounded outdoor receptacle.
• Elektrisk vurdering: Overskrid ikke den maksimale elektriske kapacitet på 15 Amps, 1875 Watts, 125 Volts, or 1/3 Horsepower. Overloading can cause overheating and fire.
• Vandbeskyttelse: While designed for outdoor use, avoid submerging the unit in water. Ensure the outlets are facing downwards when installed to prevent water accumulation.
• Ledningsstyring: Route cords to prevent tripping hazards and protect them from damage.
• Forslag 65 Advarsel: Dette produkt kan indeholde kemikalier, som staten Californien kender til at forårsage kræft og fødselsdefekter eller anden reproduktionsskade. Vask hænder efter håndtering.
• Batterisikkerhed: The remote control uses a CR2032 3V button-cell battery. Keep batteries out of reach of children. If swallowed, seek immediate medical attention.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• 1 x Prime TNOREM02 2-Outlet Outdoor Remote Control Receiver
• 1 x Wireless Transmitter (Remote Control)
• 1 x CR2032 3V Button-Cell Battery (pre-installed in transmitter)

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Produktegenskaber

• Dobbelt jordede stikkontakter: Two 3-prong grounded outlets for connecting multiple devices.
• Trådløs drift: Control devices from up to 80 feet away using the included transmitter.
• Udendørs bedømt: Durable construction suitable for outdoor environments.
• "Reversed" Ground-Pin: Patented design allows for use with right-angle and larger transformer plugs without blocking the second outlet.
• Simple On/Off Control: Easy-to-use 2-button remote for instant power control.
• Batteri inkluderet: Transmitter comes with a replaceable CR2032 3V button-cell battery.

Billede: Et nærbillede view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Opsætning

1. Vælg placering: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
2. Tilslut modtager: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
3. Tilslut enheder: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattage of connected devices does not exceed 1875 Watts.
4. Prepare Transmitter: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Betjeningsvejledning

Using the Prime TNOREM02 is straightforward:

• At tænde: Tryk på ON button on the wireless transmitter. The indicator light on the receiver unit should illuminate, and connected devices will receive power.
• At slukke: Tryk på SLUKKET button on the wireless transmitter. The indicator light on the receiver unit should turn off, and connected devices will lose power.
• Rækkevidde: The wireless transmitter has an operating range of up to 80 feet. Obstructions such as walls or dense foliage may reduce this range.

Opretholdelse

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

1. Locate the battery compartment on the back of the wireless transmitter.
2. Using a small screwdriver or coin, carefully open the battery compartment cover.
3. Remove the old CR2032 3V button-cell battery.
4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
5. Sæt batterirummets dæksel på igen.
6. Test fjernbetjeningen for at sikre, at den fungerer korrekt.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Fejlfinding

Specifikationer

Garanti og support

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime webwebstedet eller kontakt deres kundesupportkanaler.