HPE D3700 Enclosure (Model QW967A) User Manual

1. Introduktion

This manual provides essential information for the installation, operation, and maintenance of the HPE D3700 Enclosure (Model QW967A). The HPE D3700 is a 12 Gb SAS Small Form Factor (SFF) external storage system designed to expand storage capacity for HP ProLiant and Integrity server environments, as well as MSA Arrays. It offers a flexible, modular solution for managing growing storage needs in small to midrange business applications, remote offices, and departmental locations.

2. Produktet er slutview

The HPE D3700 Enclosure is a rack-mountable unit featuring 25 small form factor drive bays. It is engineered for high-capacity and high-performance storage expansion. Below is an image illustrating the front view af kabinettet.

Figur 1: Front view of the HPE D3700 Enclosure. This image displays the front panel with 25 small form factor drive bays, status indicator LEDs, and control buttons. The design facilitates easy access for drive installation and removal.

Key components visible on the front panel include:

• Drive Bays: 25 hot-pluggable bays for 2.5-inch SAS or SATA drives.
• Status LED'er: Indicators for power, system health, and drive activity.
• Unit Identification (UID) Button/LED: Used to visually locate the enclosure within a rack.

3. Specifikationer

4. Opsætning

Proper setup is crucial for the optimal performance and longevity of your HPE D3700 Enclosure. Follow these general steps:

1. Udpakning og inspektion: Carefully unpack the enclosure and inspect for any shipping damage. Retain all packaging materials.
2. Rack installation: Install the enclosure into a standard server rack using the appropriate rail kit (sold separately). Ensure adequate airflow around the unit.
3. Strømtilslutning: Connect the power supply units (PSUs) to a grounded power source. For redundancy, connect each PSU to a separate power circuit if available.
4. Data Cable Connection: Connect the SAS data cables from your host server or HBA (Host Bus Adapter) to the appropriate ports on the enclosure. Refer to your server's documentation for specific HBA requirements and cabling configurations.
5. Drev installation: Install 2.5-inch SAS or SATA drives into the available drive bays. Ensure drives are fully seated and latched. The enclosure supports hot-swappable drives.
6. Første gang tændt: Power on the enclosure. Observe the status LEDs for normal operation.

5. Betjeningsvejledning

Once the HPE D3700 Enclosure is set up, follow these guidelines for operation:

• Tænd/sluk: The enclosure typically powers on automatically when connected to power. For controlled shutdown, follow the procedures outlined in your host server's operating system and storage management software.
• Drive Management: Drives can be added or removed while the enclosure is operational (hot-swappable). Always ensure proper procedures are followed for drive removal and replacement to prevent data loss or system instability.
• Statusovervågning: Regularly monitor the front panel LEDs for system health and drive status. Consult the HPE documentation for detailed explanations of LED patterns.
• Firmwareopdateringer: Tjek HPE-supporten med jævne mellemrum website for firmware updates for the enclosure and its components. Apply updates as recommended to ensure optimal performance and compatibility.

6. Vedligeholdelse

To ensure reliable operation and extend the lifespan of your HPE D3700 Enclosure, adhere to the following maintenance practices:

• Miljøforhold: Operate the enclosure within the specified temperature and humidity ranges. Ensure proper ventilation and prevent obstruction of air vents.
• Rensning: Keep the exterior of the enclosure clean and free of dust. Use a soft, dry cloth. Do not use liquid cleaners directly on the unit.
• Kabelstyring: Ensure all power and data cables are securely connected and properly routed to prevent accidental disconnections or damage.
• Regelmæssig kontrol: Periodically inspect the physical condition of the enclosure, including power supply units and cooling fans, for any signs of wear or malfunction.

7. Fejlfinding

This section provides basic troubleshooting steps for common issues. For more complex problems, refer to the official HPE documentation or contact technical support.

• Enclosure Not Powering On:
  • Verify power cables are securely connected to both the enclosure and the power source.
  • Check power outlets and circuit breakers.
  • Ensure power supply units are functioning correctly (check their individual LEDs).
• Drev ikke fundet:
  • Ensure drives are fully seated in their bays.
  • Verify SAS data cables are correctly connected between the enclosure and the host HBA.
  • Check the HBA status in the host server.
  • Confirm drives are compatible with the HPE D3700 Enclosure.
• System Health LED Indicates Error:
  • Consult the HPE D3700 Enclosure documentation for specific error codes or LED patterns.
  • This often indicates a component failure (e.g., fan, power supply, or drive).

8. Garanti og support

For detailed information regarding the warranty coverage for your HPE D3700 Enclosure (Model QW967A), please refer to the official HPE warranty statement provided with your product or visit the HPE support website. HPE offers various support services to assist with product inquiries, technical issues, and parts replacement.

HPE Support Resources:

• Online dokumentation: Access the latest user guides, technical specifications, and troubleshooting manuals on the official HPE webwebsted.
• Teknisk support: Contact HPE technical support for assistance with complex issues or hardware failures. Have your product serial number and model information ready.
• Dele og service: Information on obtaining replacement parts and authorized service providers can be found on the HPE support portal.